сб, 10 июн. 2023 г. в 21:01, Conor Dooley <conor at kernel.org>:
...
> > > > + - |
> > > > + thermal-sensor at 2009400 {
> > > > + compatible = "allwinner,sun20i-d1-ths";
> > > > + reg = <0x02009400 0x400>;
> > > > + interrupts = <0 90 0>;
> > > > + clocks = <&ccu 0>;
> > > > + clock-names = "bus";
> > > > + resets = <&ccu 2>;
> > > > + nvmem-cells = <&ths_calibration>;
> > > > + nvmem-cell-names = "calibration";
> > > > + #thermal-sensor-cells = <0>;
> > > >
> > > >> Is this calibration required, or optional, for the d1?
> > >
> > > Calibration data for the D1 is optional as for the H6.
> > > (But without it, the sensor data will be inaccurate).
> >
> > Okay. Modulo the signoff:
> > Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
>
> Wait, that's not what I meant to say... Clearly turned my brain off for
> a moment. If it is not going to function correctly without the
> calibration data, why not make the calibration data required for the
> d1's ths?
I don't really know why, but the calibration data is optional for
other controllers.
So I just did it the same way.
Here is explanation comment about it from the driver:
/*
* Even if the external calibration data stored in sid is
* not accessible, the THS hardware can still work, although
* the data won't be so accurate.
*
* The default value of calibration register is 0x800 for
* every sensor, and the calibration value is usually 0x7xx
* or 0x8xx, so they won't be away from the default value
* for a lot.
*
* So here we do not return error if the calibration data is
* not available, except the probe needs deferring.
*/