Bug report: kernel paniced while booting
Sunil V L
sunilvl at ventanamicro.com
Tue Jun 6 02:01:30 PDT 2023
On Tue, Jun 06, 2023 at 09:20:34AM +0200, Alexandre Ghiti wrote:
>
> On 05/06/2023 22:55, Atish Patra wrote:
> > On Mon, Jun 5, 2023 at 8:13 AM Sunil V L <sunilvl at ventanamicro.com> wrote:
> > > On Mon, Jun 05, 2023 at 04:25:06PM +0200, Alexandre Ghiti wrote:
> > > > Hi Song,
> > > >
> > > > On Mon, Jun 5, 2023 at 12:52 PM Song Shuai <songshuaishuai at tinylab.org> wrote:
> > > > > Description of problem:
> > > > >
> > > > > Booting Linux With RiscVVirtQemu edk2 firmware, a Store/AMO page fault was trapped to trigger a kernel panic.
> > > > > The entire log has been posted at this link : https://termbin.com/nga4.
> > > > >
> > > > > You can reproduce it with the following step :
> > > > >
> > > > > 1. prepare the environment with
> > > > > - Qemu-virt: v8.0.0 (with OpenSbi v1.2)
> > > > > - edk2 : at commit (2bc8545883 "UefiCpuPkg/CpuPageTableLib: Reduce the number of random tests")
> > > > > - Linux : v6.4-rc1 and later version
> > > > >
> > > > > 2. start the Qemu virt board
> > > > >
> > > > > ```sh
> > > > > $ cat ~/8_riscv/start_latest.sh
> > > > > #!/bin/bash
> > > > > /home/song/8_riscv/3_acpi/qemu/ooo/usr/local/bin/qemu-system-riscv64 \
> > > > > -s -nographic -drive file=/home/song/8_riscv/3_acpi/Build_virt/RiscVVirtQemu/RELEASE_GCC5/FV/RISCV_VIRT.fd,if=pflash,format=raw,unit=1 \
> > > > > -machine virt,acpi=off -smp 2 -m 2G \
> > > > > -kernel /home/song/9_linux/linux/00_rv_def/arch/riscv/boot/Image \
> > > > > -initrd /home/song/8_riscv/3_acpi/buildroot/output/images/rootfs.ext2 \
> > > > > -append "root=/dev/ram ro console=ttyS0 earlycon=uart8250,mmio,0x10000000 efi=debug loglevel=8 memblock=debug" ## also panic by memtest
> > > > > ```
> > > > > 3. Then you will encounter the kernel panic logged in the above link
> > > > >
> > > > > Other Information:
> > > > >
> > > > > 1. -------
> > > > >
> > > > > This report is not identical to my prior report -- "kernel paniced when system hibernates" [1], but both of them
> > > > > are closely related with the commit (3335068f8721 "riscv: Use PUD/P4D/PGD pages for the linear mapping").
> > > > >
> > > > > With this commit, hibernation is trapped with "access fault" while accessing the PMP-protected regions (mmode_resv0 at 80000000)
> > > > > from OpenSbi (BTW, hibernation is marked as nonportable by Conor[2]).
> > > > >
> > > > > In this report, efi_init handoffs the memory mapping from Boot Services to memblock where reserves mmode_resv0 at 80000000,
> > > > > so there is no "access fault" but "page fault".
> > > > >
> > > > > And reverting commit 3335068f8721 indeed fixed this panic.
> > > > >
> > > > > 2. -------
> > > > >
> > > > > As the gdb-pt-dump [3] tool shows, the PTE which covered the fault virtual address had the appropriate permission to store.
> > > > > Is there another way to trigger the "Store/AMO page fault"? Or the creation of linear mapping in commit 3335068f8721 did something wrong?
> > > > >
> > > > > ```
> > > > > (gdb) p/x $satp
> > > > > $1 = 0xa000000000081708
> > > > > (gdb) pt -satp 0xa000000000081708
> > > > > Address : Length Permissions
> > > > > 0xff1bfffffea39000 : 0x1000 | W:1 X:0 R:1 S:1
> > > > > 0xff1bfffffebf9000 : 0x1000 | W:1 X:0 R:1 S:1
> > > > > 0xff1bfffffec00000 : 0x400000 | W:1 X:0 R:1 S:1
> > > > > 0xff60000000000000 : 0x1c0000 | W:1 X:0 R:1 S:1
> > > > > 0xff60000000200000 : 0xa00000 | W:0 X:0 R:1 S:1
> > > > > 0xff60000000c00000 : 0x7f000000 | W:1 X:0 R:1 S:1 // badaddr: ff6000007fdb1000
> > > > > 0xff6000007fdc0000 : 0x3d000 | W:1 X:0 R:1 S:1
> > > > > 0xff6000007ffbf000 : 0x1000 | W:1 X:0 R:1 S:1
> > > > > 0xffffffff80000000 : 0xc00000 | W:0 X:1 R:1 S:1
> > > > > 0xffffffff80c00000 : 0xa00000 | W:1 X:0 R:1 S:1
> > > > >
> > > > > ```
> > > > >
> > > > > 3. ------
> > > > >
> > > > > You can also reproduce similar panic by appending "memtest" in kernel cmdline.
> > > > > I have posted the memtest boot log at this link: https://termbin.com/1twl.
> > > > >
> > > > > Please correct me if I'm wrong.
> > > > >
> > > > > [1]: https://lore.kernel.org/linux-riscv/CAAYs2=gQvkhTeioMmqRDVGjdtNF_vhB+vm_1dHJxPNi75YDQ_Q@mail.gmail.com/
> > > > > [2]: https://lore.kernel.org/linux-riscv/20230526-astride-detonator-9ae120051159@wendy/
> > > > > [3]: https://github.com/martinradev/gdb-pt-dump
> > > > Thanks for the thorough report, really appreciated.
> > > >
> > > > So there are multiple issues here:
> > > >
> > > > - the first one is that the memory region for opensbi is marked as not
> > > > cacheable in the efi memory map, and then this region is not mapped in
> > > > the linear mapping:
> > > > [ 0.000000] efi: 0x000080000000-0x00008003ffff [Reserved | |
> > > > | | | | | | | | | | | |UC]
> > > >
> > @Alex: The OpenSBI region is marked reserved because EDK2 chooses to
> > do that explicitly as explained by Sunil.
> > I don't think UC has to do anything with it. All the EFI memory regions are UC.
>
>
> Oops, thanks for correcting me, UC has nothing to do with that indeed, I
> misread is_usable_memory() (https://elixir.bootlin.com/linux/latest/source/drivers/firmware/efi/efi-init.c#L127):
> EFI_RESERVED_TYPE will return false.
>
> And then this region won't get mapped, so that's the equivalent of "no-map".
>
>
> >
> > > > - the second one (that I feel a bit ashamed of...) is that I did not
> > > > check the alignment of the virtual address when choosing the map size
> > > > in best_map_size() and then we end up trying to map a physical region
> > > > aligned on 2MB that is actually not aligned on 2MB virtually because
> > > > the opensbi region is not mapped at all.
> > > >
> > > > - the possible third one is that we should not map the linear mapping
> > > > using 4K pages, this would be slow in my opinion, and I think we
> > > > should waste a bit of memory to align va and pa on a 2MB boundary.
> > > >
> > > > So I'll fix the second issue, and possibly the third one, and if no
> > > > one looks into why the opensbi region is mapped in UC, I'll take a
> > > > look at edk2.
> > > >
> > > Hi Alex,
> > >
> > > EDK2 marks opensbi range as reserved memory in EFI map. According to DT
> > > spec, if the no-map is not set, we need to mark it as
> > > EfiBootServicesData but EfiBootServicesData is actually considered as
> > > free memory in kernel, as per UEFI spec. To avoid kernel using this
> > > memory, we deviated from the DT spec for opensbi ranges.
> > >
> > IMO, that should be the correct way unless we can change it to
> > EfiRunServicesData/Code.
>
>
> I'd say that everything depends on "reusable" no?
>
> If "no-map" then
> EfiReserved
> else
> if reusable then
> EfiBootServicesData
> else
> EfiRuntimeServicesData
> endif
> endif
>
Hi Alex,
Is this your proposal or documented somewhere? If it is proposal, this
option was intentionally not allowed as I understand from Ard's response
at [1].
[1] - https://github.com/ARM-software/ebbr/issues/52#issuecomment-690362294
Thanks,
Sunil
More information about the linux-riscv
mailing list