[PATCH v2 1/3] dt-bindings: qspi: cdns,qspi-nor: Add clocks for StarFive JH7110 SoC

[William Qiu]

On 2023/6/3 2:02, Conor Dooley wrote:
> On Fri, Jun 02, 2023 at 04:49:23PM +0800, William Qiu wrote:
>> The QSPI controller needs three clock items to work properly on StarFive
>> JH7110 SoC, so there is need to change the maxItems's value to 3. Other
>> platforms do not have this constraint.
>> 
>> Signed-off-by: William Qiu <william.qiu at starfivetech.com>
>> Reviewed-by: Hal Feng <hal.feng at starfivetech.com>
>> ---
>>  .../devicetree/bindings/spi/cdns,qspi-nor.yaml    | 15 ++++++++++++---
>>  1 file changed, 12 insertions(+), 3 deletions(-)
>> 
>> diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>> index b310069762dd..b6a27171d965 100644
>> --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>> +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml
>> @@ -26,6 +26,15 @@ allOf:
>>              const: starfive,jh7110-qspi
>>      then:
>>        properties:
>> +        clocks:
>> +          maxItems: 3
>> +
>> +        clock-names:
>> +          items:
>> +            - const: ref_clk
> 
> Aww, I liked Mark's suggestions better.
> If you are respinning to fix the LKP reported issue w/ ignoring the result
> of enabling the clocks, could you chop the _clk off of this one?
> 
> Otherwise,
> Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
> 
> Thanks,
> Conor.

Hi Conor,

Thanks for taking time to review this patch series.
About the clock name, I would take Mark's suggestions, and will update it in
next version.

Best regards,
William