[PATCH -next v21 12/27] riscv: Add ptrace vector support

Andy Chiu andy.chiu at sifive.com
Mon Jun 5 04:07:09 PDT 2023


From: Greentime Hu <greentime.hu at sifive.com>

This patch adds ptrace support for riscv vector. The vector registers will
be saved in datap pointer of __riscv_v_ext_state. This pointer will be set
right after the __riscv_v_ext_state data structure then it will be put in
ubuf for ptrace system call to get or set. It will check if the datap got
from ubuf is set to the correct address or not when the ptrace system call
is trying to set the vector registers.

Co-developed-by: Vincent Chen <vincent.chen at sifive.com>
Signed-off-by: Vincent Chen <vincent.chen at sifive.com>
Signed-off-by: Greentime Hu <greentime.hu at sifive.com>
Signed-off-by: Andy Chiu <andy.chiu at sifive.com>
Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
Reviewed-by: Palmer Dabbelt <palmer at rivosinc.com>
---
Changelog V18:
 - Use sizeof(vstate->datap) instead of sizeof(void*) (Eike)
---
 arch/riscv/include/uapi/asm/ptrace.h |  7 +++
 arch/riscv/kernel/ptrace.c           | 70 ++++++++++++++++++++++++++++
 include/uapi/linux/elf.h             |  1 +
 3 files changed, 78 insertions(+)

diff --git a/arch/riscv/include/uapi/asm/ptrace.h b/arch/riscv/include/uapi/asm/ptrace.h
index 586786d023c4..e8d127ec5cf7 100644
--- a/arch/riscv/include/uapi/asm/ptrace.h
+++ b/arch/riscv/include/uapi/asm/ptrace.h
@@ -94,6 +94,13 @@ struct __riscv_v_ext_state {
 	 */
 };
 
+/*
+ * According to spec: The number of bits in a single vector register,
+ * VLEN >= ELEN, which must be a power of 2, and must be no greater than
+ * 2^16 = 65536bits = 8192bytes
+ */
+#define RISCV_MAX_VLENB (8192)
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _UAPI_ASM_RISCV_PTRACE_H */
diff --git a/arch/riscv/kernel/ptrace.c b/arch/riscv/kernel/ptrace.c
index 23c48b14a0e7..1d572cf3140f 100644
--- a/arch/riscv/kernel/ptrace.c
+++ b/arch/riscv/kernel/ptrace.c
@@ -7,6 +7,7 @@
  * Copied from arch/tile/kernel/ptrace.c
  */
 
+#include <asm/vector.h>
 #include <asm/ptrace.h>
 #include <asm/syscall.h>
 #include <asm/thread_info.h>
@@ -24,6 +25,9 @@ enum riscv_regset {
 #ifdef CONFIG_FPU
 	REGSET_F,
 #endif
+#ifdef CONFIG_RISCV_ISA_V
+	REGSET_V,
+#endif
 };
 
 static int riscv_gpr_get(struct task_struct *target,
@@ -80,6 +84,61 @@ static int riscv_fpr_set(struct task_struct *target,
 }
 #endif
 
+#ifdef CONFIG_RISCV_ISA_V
+static int riscv_vr_get(struct task_struct *target,
+			const struct user_regset *regset,
+			struct membuf to)
+{
+	struct __riscv_v_ext_state *vstate = &target->thread.vstate;
+
+	if (!riscv_v_vstate_query(task_pt_regs(target)))
+		return -EINVAL;
+
+	/*
+	 * Ensure the vector registers have been saved to the memory before
+	 * copying them to membuf.
+	 */
+	if (target == current)
+		riscv_v_vstate_save(current, task_pt_regs(current));
+
+	/* Copy vector header from vstate. */
+	membuf_write(&to, vstate, offsetof(struct __riscv_v_ext_state, datap));
+	membuf_zero(&to, sizeof(vstate->datap));
+
+	/* Copy all the vector registers from vstate. */
+	return membuf_write(&to, vstate->datap, riscv_v_vsize);
+}
+
+static int riscv_vr_set(struct task_struct *target,
+			const struct user_regset *regset,
+			unsigned int pos, unsigned int count,
+			const void *kbuf, const void __user *ubuf)
+{
+	int ret, size;
+	struct __riscv_v_ext_state *vstate = &target->thread.vstate;
+
+	if (!riscv_v_vstate_query(task_pt_regs(target)))
+		return -EINVAL;
+
+	/* Copy rest of the vstate except datap */
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, vstate, 0,
+				 offsetof(struct __riscv_v_ext_state, datap));
+	if (unlikely(ret))
+		return ret;
+
+	/* Skip copy datap. */
+	size = sizeof(vstate->datap);
+	count -= size;
+	ubuf += size;
+
+	/* Copy all the vector registers. */
+	pos = 0;
+	ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, vstate->datap,
+				 0, riscv_v_vsize);
+	return ret;
+}
+#endif
+
 static const struct user_regset riscv_user_regset[] = {
 	[REGSET_X] = {
 		.core_note_type = NT_PRSTATUS,
@@ -99,6 +158,17 @@ static const struct user_regset riscv_user_regset[] = {
 		.set = riscv_fpr_set,
 	},
 #endif
+#ifdef CONFIG_RISCV_ISA_V
+	[REGSET_V] = {
+		.core_note_type = NT_RISCV_VECTOR,
+		.align = 16,
+		.n = ((32 * RISCV_MAX_VLENB) +
+		      sizeof(struct __riscv_v_ext_state)) / sizeof(__u32),
+		.size = sizeof(__u32),
+		.regset_get = riscv_vr_get,
+		.set = riscv_vr_set,
+	},
+#endif
 };
 
 static const struct user_regset_view riscv_user_native_view = {
diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h
index ac3da855fb19..7d8d9ae36615 100644
--- a/include/uapi/linux/elf.h
+++ b/include/uapi/linux/elf.h
@@ -440,6 +440,7 @@ typedef struct elf64_shdr {
 #define NT_MIPS_DSP	0x800		/* MIPS DSP ASE registers */
 #define NT_MIPS_FP_MODE	0x801		/* MIPS floating-point mode */
 #define NT_MIPS_MSA	0x802		/* MIPS SIMD registers */
+#define NT_RISCV_VECTOR	0x900		/* RISC-V vector registers */
 #define NT_LOONGARCH_CPUCFG	0xa00	/* LoongArch CPU config registers */
 #define NT_LOONGARCH_CSR	0xa01	/* LoongArch control and status registers */
 #define NT_LOONGARCH_LSX	0xa02	/* LoongArch Loongson SIMD Extension registers */
-- 
2.17.1




More information about the linux-riscv mailing list