[PATCH v2 2/3] clocksource: Add StarFive timer driver
Emil Renner Berthing
emil.renner.berthing at canonical.com
Fri Jun 2 03:51:08 PDT 2023
On Fri, 2 Jun 2023 at 11:48, Xingyu Wu <xingyu.wu at starfivetech.com> wrote:
>
> On 2023/3/20 21:54, Xingyu Wu wrote:
> > Add timer driver for the StarFive JH7110 SoC.
> >
> > Signed-off-by: Xingyu Wu <xingyu.wu at starfivetech.com>
> > ---
> > MAINTAINERS | 7 +
> > drivers/clocksource/Kconfig | 12 +
> > drivers/clocksource/Makefile | 1 +
> > drivers/clocksource/timer-starfive.c | 390 +++++++++++++++++++++++++++
> > drivers/clocksource/timer-starfive.h | 96 +++++++
> > 5 files changed, 506 insertions(+)
> > create mode 100644 drivers/clocksource/timer-starfive.c
> > create mode 100644 drivers/clocksource/timer-starfive.h
Hi Xingyu,
Just by a quick glance you're again adding a header that is only used
in one file. I don't see any other driver in drivers/clocksource doing
that, so I don't understand why you need that.
/Emil
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 958b7ec118b4..dac6298d8f6e 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -19958,6 +19958,13 @@ S: Maintained
> > T: git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
> > F: drivers/soc/starfive/
> >
> > +STARFIVE TIMER DRIVER
> > +M: Samin Guo <samin.guo at starfivetech.com>
> > +M: Xingyu Wu <xingyu.wu at starfivetech.com>
> > +S: Supported
> > +F: Documentation/devicetree/bindings/timer/starfive*
> > +F: drivers/clocksource/timer-starfive*
> > +
> > STARFIVE TRNG DRIVER
> > M: Jia Jie Ho <jiajie.ho at starfivetech.com>
> > S: Supported
> > diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> > index 5fc8f0e7fb38..35daf07d4db7 100644
> > --- a/drivers/clocksource/Kconfig
> > +++ b/drivers/clocksource/Kconfig
> > @@ -630,6 +630,18 @@ config RISCV_TIMER
> > is accessed via both the SBI and the rdcycle instruction. This is
> > required for all RISC-V systems.
> >
> > +config STARFIVE_TIMER
> > + bool "Timer for the STARFIVE SoCs"
> > + depends on ARCH_STARFIVE || COMPILE_TEST
> > + select TIMER_OF
> > + select CLKSRC_MMIO
> > + default ARCH_STARFIVE
> > + help
> > + This enables the timer for StarFive SoCs. On RISC-V platform,
> > + the system has started RISCV_TIMER. But you can also use this timer
> > + to do a lot more on StarFive SoCs. This timer can provide high
> > + precision and four channels to use in JH7110 SoC.
> > +
> > config CLINT_TIMER
> > bool "CLINT Timer for the RISC-V platform" if COMPILE_TEST
> > depends on GENERIC_SCHED_CLOCK && RISCV
> > diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> > index 64ab547de97b..276695d95cdc 100644
> > --- a/drivers/clocksource/Makefile
> > +++ b/drivers/clocksource/Makefile
> > @@ -80,6 +80,7 @@ obj-$(CONFIG_INGENIC_TIMER) += ingenic-timer.o
> > obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o
> > obj-$(CONFIG_X86_NUMACHIP) += numachip.o
> > obj-$(CONFIG_RISCV_TIMER) += timer-riscv.o
> > +obj-$(CONFIG_STARFIVE_TIMER) += timer-starfive.o
> > obj-$(CONFIG_CLINT_TIMER) += timer-clint.o
> > obj-$(CONFIG_CSKY_MP_TIMER) += timer-mp-csky.o
> > obj-$(CONFIG_GX6605S_TIMER) += timer-gx6605s.o
> > diff --git a/drivers/clocksource/timer-starfive.c b/drivers/clocksource/timer-starfive.c
> > new file mode 100644
> > index 000000000000..53163948ed86
> > --- /dev/null
> > +++ b/drivers/clocksource/timer-starfive.c
> > @@ -0,0 +1,390 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Starfive Timer driver
> > + *
> > + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> > + *
> > + * Author:
> > + * Xingyu Wu <xingyu.wu at starfivetech.com>
> > + * Samin Guo <samin.guo at starfivetech.com>
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/clockchips.h>
> > +#include <linux/clocksource.h>
> > +#include <linux/err.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/irq.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/of_device.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/reset.h>
> > +#include <linux/sched_clock.h>
> > +
> > +#include "timer-starfive.h"
> > +
> > +static const struct starfive_timer_chan_base starfive_timer_jh7110_base = {
> > + .ctrl = STARFIVE_TIMER_JH7110_CTL,
> > + .load = STARFIVE_TIMER_JH7110_LOAD,
> > + .enable = STARFIVE_TIMER_JH7110_ENABLE,
> > + .reload = STARFIVE_TIMER_JH7110_RELOAD,
> > + .value = STARFIVE_TIMER_JH7110_VALUE,
> > + .intclr = STARFIVE_TIMER_JH7110_INT_CLR,
> > + .intmask = STARFIVE_TIMER_JH7110_INT_MASK,
> > + .channel_num = STARFIVE_TIMER_CH_4,
> > + .channel_base = {STARFIVE_TIMER_CH_BASE(0), STARFIVE_TIMER_CH_BASE(1),
> > + STARFIVE_TIMER_CH_BASE(2), STARFIVE_TIMER_CH_BASE(3)},
> > +};
> > +
> > +static inline struct starfive_clkevt *to_starfive_clkevt(struct clock_event_device *evt)
> > +{
> > + return container_of(evt, struct starfive_clkevt, evt);
> > +}
> > +
> > +/* 0:continuous-run mode, 1:single-run mode */
> > +static inline void starfive_timer_set_mod(struct starfive_clkevt *clkevt, int mod)
> > +{
> > + writel(mod, clkevt->ctrl);
> > +}
> > +
> > +/* Interrupt Mask Register, 0:Unmask, 1:Mask */
> > +static inline void starfive_timer_int_enable(struct starfive_clkevt *clkevt)
> > +{
> > + writel(STARFIVE_TIMER_INTMASK_DIS, clkevt->intmask);
> > +}
> > +
> > +static inline void starfive_timer_int_disable(struct starfive_clkevt *clkevt)
> > +{
> > + writel(STARFIVE_TIMER_INTMASK_ENA, clkevt->intmask);
> > +}
> > +
> > +/*
> > + * BIT(0): Read value represent channel intr status.
> > + * Write 1 to this bit to clear interrupt. Write 0 has no effects.
> > + * BIT(1): "1" means that it is clearing interrupt. BIT(0) can not be written.
> > + */
> > +static inline int starfive_timer_int_clear(struct starfive_clkevt *clkevt)
> > +{
> > + u32 value;
> > + int ret;
> > +
> > + /* waiting interrupt can be to clearing */
> > + ret = readl_poll_timeout_atomic(clkevt->intclr, value,
> > + !(value & STARFIVE_TIMER_JH7110_INT_CLR_AVA_MASK),
> > + STARFIVE_DELAY_US, STARFIVE_TIMEOUT_US);
> > + if (!ret)
> > + writel(0x1, clkevt->intclr);
> > +
> > + return ret;
> > +}
> > +
> > +/*
> > + * The initial value to be loaded into the
> > + * counter and is also used as the reload value.
> > + * val = clock rate --> 1s
> > + */
> > +static inline void starfive_timer_set_load(struct starfive_clkevt *clkevt, u32 val)
> > +{
> > + writel(val, clkevt->load);
> > +}
> > +
> > +static inline u32 starfive_timer_get_val(struct starfive_clkevt *clkevt)
> > +{
> > + return readl(clkevt->value);
> > +}
> > +
> > +/*
> > + * Write RELOAD register to reload preset value to counter.
> > + * (Write 0 and write 1 are both ok)
> > + */
> > +static inline void starfive_timer_set_reload(struct starfive_clkevt *clkevt)
> > +{
> > + writel(0, clkevt->reload);
> > +}
> > +
> > +static inline void starfive_timer_enable(struct starfive_clkevt *clkevt)
> > +{
> > + writel(STARFIVE_TIMER_ENA, clkevt->enable);
> > +}
> > +
> > +static inline void starfive_timer_disable(struct starfive_clkevt *clkevt)
> > +{
> > + writel(STARFIVE_TIMER_DIS, clkevt->enable);
> > +}
> > +
> > +static int starfive_timer_int_init_enable(struct starfive_clkevt *clkevt)
> > +{
> > + int ret;
> > +
> > + starfive_timer_int_disable(clkevt);
> > + ret = starfive_timer_int_clear(clkevt);
> > + if (ret)
> > + return ret;
> > +
> > + starfive_timer_int_enable(clkevt);
> > + starfive_timer_enable(clkevt);
> > +
> > + return 0;
> > +}
> > +
> > +static int starfive_timer_shutdown(struct clock_event_device *evt)
> > +{
> > + struct starfive_clkevt *clkevt = to_starfive_clkevt(evt);
> > +
> > + starfive_timer_disable(clkevt);
> > + return starfive_timer_int_clear(clkevt);
> > +}
> > +
> > +static void starfive_timer_suspend(struct clock_event_device *evt)
> > +{
> > + struct starfive_clkevt *clkevt = to_starfive_clkevt(evt);
> > +
> > + clkevt->reload_val = starfive_timer_get_val(clkevt);
> > + starfive_timer_shutdown(evt);
> > +}
> > +
> > +static void starfive_timer_resume(struct clock_event_device *evt)
> > +{
> > + struct starfive_clkevt *clkevt = to_starfive_clkevt(evt);
> > +
> > + starfive_timer_set_load(clkevt, clkevt->reload_val);
> > + starfive_timer_set_reload(clkevt);
> > + starfive_timer_int_enable(clkevt);
> > + starfive_timer_enable(clkevt);
> > +}
> > +
> > +static int starfive_timer_tick_resume(struct clock_event_device *evt)
> > +{
> > + starfive_timer_resume(evt);
> > +
> > + return 0;
> > +}
> > +
> > +static int starfive_clocksource_init(struct starfive_clkevt *clkevt)
> > +{
> > + int ret;
> > +
> > + starfive_timer_set_mod(clkevt, STARFIVE_TIMER_MOD_CONTIN);
> > + starfive_timer_set_load(clkevt, STARFIVE_TIMER_MAX_TICKS);
> > + ret = starfive_timer_int_init_enable(clkevt);
> > + if (ret)
> > + return ret;
> > +
> > + return clocksource_mmio_init(clkevt->value, clkevt->name, clkevt->rate,
> > + STARFIVE_CLOCK_SOURCE_RATING, STARFIVE_VALID_BITS,
> > + clocksource_mmio_readl_down);
> > +}
> > +
> > +/* IRQ handler for the timer */
> > +static irqreturn_t starfive_timer_interrupt(int irq, void *priv)
> > +{
> > + struct clock_event_device *evt = (struct clock_event_device *)priv;
> > + struct starfive_clkevt *clkevt = to_starfive_clkevt(evt);
> > +
> > + if (starfive_timer_int_clear(clkevt))
> > + return IRQ_NONE;
> > +
> > + if (evt->event_handler)
> > + evt->event_handler(evt);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int starfive_timer_set_periodic(struct clock_event_device *evt)
> > +{
> > + struct starfive_clkevt *clkevt = to_starfive_clkevt(evt);
> > +
> > + starfive_timer_disable(clkevt);
> > + starfive_timer_set_mod(clkevt, STARFIVE_TIMER_MOD_CONTIN);
> > + starfive_timer_set_load(clkevt, clkevt->periodic);
> > +
> > + return starfive_timer_int_init_enable(clkevt);
> > +}
> > +
> > +static int starfive_timer_set_oneshot(struct clock_event_device *evt)
> > +{
> > + struct starfive_clkevt *clkevt = to_starfive_clkevt(evt);
> > +
> > + starfive_timer_disable(clkevt);
> > + starfive_timer_set_mod(clkevt, STARFIVE_TIMER_MOD_SINGLE);
> > + starfive_timer_set_load(clkevt, STARFIVE_TIMER_MAX_TICKS);
> > +
> > + return starfive_timer_int_init_enable(clkevt);
> > +}
> > +
> > +static int starfive_timer_set_next_event(unsigned long next,
> > + struct clock_event_device *evt)
> > +{
> > + struct starfive_clkevt *clkevt = to_starfive_clkevt(evt);
> > +
> > + starfive_timer_disable(clkevt);
> > + starfive_timer_set_mod(clkevt, STARFIVE_TIMER_MOD_SINGLE);
> > + starfive_timer_set_load(clkevt, next);
> > + starfive_timer_enable(clkevt);
> > +
> > + return 0;
> > +}
> > +
> > +static void starfive_set_clockevent(struct clock_event_device *evt)
> > +{
> > + evt->features = CLOCK_EVT_FEAT_PERIODIC |
> > + CLOCK_EVT_FEAT_ONESHOT |
> > + CLOCK_EVT_FEAT_DYNIRQ;
> > + evt->set_state_shutdown = starfive_timer_shutdown;
> > + evt->set_state_periodic = starfive_timer_set_periodic;
> > + evt->set_state_oneshot = starfive_timer_set_oneshot;
> > + evt->set_state_oneshot_stopped = starfive_timer_shutdown;
> > + evt->tick_resume = starfive_timer_tick_resume;
> > + evt->set_next_event = starfive_timer_set_next_event;
> > + evt->suspend = starfive_timer_suspend;
> > + evt->resume = starfive_timer_resume;
> > + evt->rating = STARFIVE_CLOCKEVENT_RATING;
> > +}
> > +
> > +static void starfive_clockevents_register(struct starfive_clkevt *clkevt)
> > +{
> > + clkevt->rate = clk_get_rate(clkevt->clk);
> > + clkevt->periodic = DIV_ROUND_CLOSEST(clkevt->rate, HZ);
> > +
> > + starfive_set_clockevent(&clkevt->evt);
> > + clkevt->evt.name = clkevt->name;
> > + clkevt->evt.irq = clkevt->irq;
> > + clkevt->evt.cpumask = cpu_possible_mask;
> > +
> > + clockevents_config_and_register(&clkevt->evt, clkevt->rate,
> > + STARFIVE_TIMER_MIN_TICKS, STARFIVE_TIMER_MAX_TICKS);
> > +}
> > +
> > +static void __init starfive_clkevt_base_init(const struct starfive_timer_chan_base *timer,
> > + struct starfive_clkevt *clkevt,
> > + void __iomem *base, int ch)
> > +{
> > + void __iomem *channel_base;
> > +
> > + channel_base = base + timer->channel_base[ch];
> > + clkevt->base = channel_base;
> > + clkevt->ctrl = channel_base + timer->ctrl;
> > + clkevt->load = channel_base + timer->load;
> > + clkevt->enable = channel_base + timer->enable;
> > + clkevt->reload = channel_base + timer->reload;
> > + clkevt->value = channel_base + timer->value;
> > + clkevt->intclr = channel_base + timer->intclr;
> > + clkevt->intmask = channel_base + timer->intmask;
> > +}
> > +
> > +static int __init starfive_timer_probe(struct platform_device *pdev)
> > +{
> > + const struct starfive_timer_chan_base *timer_base = of_device_get_match_data(&pdev->dev);
> > + char name[10];
> > + struct starfive_timer_priv *priv;
> > + struct starfive_clkevt *clkevt;
> > + struct clk *pclk;
> > + struct reset_control *rst;
> > + int ch;
> > + int ret;
> > +
> > + priv = devm_kzalloc(&pdev->dev, struct_size(priv, clkevt, timer_base->channel_num),
> > + GFP_KERNEL);
> > + if (!priv)
> > + return -ENOMEM;
> > +
> > + priv->base = devm_platform_ioremap_resource(pdev, 0);
> > + if (IS_ERR(priv->base))
> > + return dev_err_probe(&pdev->dev, PTR_ERR(priv->base),
> > + "failed to map registers\n");
> > +
> > + rst = devm_reset_control_get_exclusive(&pdev->dev, "apb");
> > + if (IS_ERR(rst))
> > + return dev_err_probe(&pdev->dev, PTR_ERR(rst), "failed to get apb reset\n");
> > +
> > + pclk = devm_clk_get_enabled(&pdev->dev, "apb");
> > + if (IS_ERR(pclk))
> > + return dev_err_probe(&pdev->dev, PTR_ERR(pclk),
> > + "failed to get & enable apb clock\n");
> > +
> > + ret = reset_control_deassert(rst);
> > + if (ret)
> > + goto err;
> > +
> > + priv->dev = &pdev->dev;
> > + platform_set_drvdata(pdev, priv);
> > +
> > + for (ch = 0; ch < timer_base->channel_num; ch++) {
> > + clkevt = &priv->clkevt[ch];
> > + snprintf(name, sizeof(name), "ch%d", ch);
> > +
> > + starfive_clkevt_base_init(timer_base, clkevt, priv->base, ch);
> > + /* Ensure timers are disabled */
> > + starfive_timer_disable(clkevt);
> > +
> > + rst = devm_reset_control_get_exclusive(&pdev->dev, name);
> > + if (IS_ERR(rst)) {
> > + ret = PTR_ERR(rst);
> > + goto err;
> > + }
> > +
> > + clkevt->clk = devm_clk_get_enabled(&pdev->dev, name);
> > + if (IS_ERR(clkevt->clk)) {
> > + ret = PTR_ERR(clkevt->clk);
> > + goto err;
> > + }
> > +
> > + ret = reset_control_deassert(rst);
> > + if (ret)
> > + goto ch_err;
> > +
> > + clkevt->irq = platform_get_irq(pdev, ch);
> > + if (clkevt->irq < 0) {
> > + ret = clkevt->irq;
> > + goto ch_err;
> > + }
> > +
> > + snprintf(clkevt->name, sizeof(clkevt->name), "%s.ch%d", pdev->name, ch);
> > + starfive_clockevents_register(clkevt);
> > +
> > + ret = devm_request_irq(&pdev->dev, clkevt->irq, starfive_timer_interrupt,
> > + IRQF_TIMER | IRQF_IRQPOLL,
> > + clkevt->name, &clkevt->evt);
> > + if (ret)
> > + goto ch_err;
> > +
> > + ret = starfive_clocksource_init(clkevt);
> > + if (ret)
> > + goto ch_err;
> > + }
> > +
> > + return 0;
> > +
> > +ch_err:
> > + /* Only unregister the failed channel and the rest timer channels continue to work. */
> > + clk_disable_unprepare(clkevt->clk);
> > +err:
> > + /* If no other channel successfully registers, pclk should be disabled. */
> > + if (!ch)
> > + clk_disable_unprepare(pclk);
> > +
> > + return ret;
> > +}
> > +
> > +static const struct of_device_id starfive_timer_match[] = {
> > + { .compatible = "starfive,jh7110-timer", .data = &starfive_timer_jh7110_base },
> > + { /* sentinel */ }
> > +};
> > +MODULE_DEVICE_TABLE(of, starfive_timer_match);
> > +
> > +static struct platform_driver starfive_timer_driver = {
> > + .probe = starfive_timer_probe,
> > + .driver = {
> > + .name = "starfive-timer",
> > + .of_match_table = starfive_timer_match,
> > + },
> > +};
> > +module_platform_driver(starfive_timer_driver);
> > +
> > +MODULE_AUTHOR("Xingyu Wu <xingyu.wu at starfivetech.com>");
> > +MODULE_DESCRIPTION("StarFive timer driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/clocksource/timer-starfive.h b/drivers/clocksource/timer-starfive.h
> > new file mode 100644
> > index 000000000000..62eb630cc98d
> > --- /dev/null
> > +++ b/drivers/clocksource/timer-starfive.h
> > @@ -0,0 +1,96 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> > + */
> > +
> > +#ifndef __STARFIVE_TIMER_H__
> > +#define __STARFIVE_TIMER_H__
> > +
> > +/* Bias: Ch0-0x0, Ch1-0x40, Ch2-0x80, and so on. */
> > +#define STARFIVE_TIMER_CH_LEN 0x40
> > +#define STARFIVE_TIMER_CH_BASE(x) ((STARFIVE_TIMER_CH_##x) * STARFIVE_TIMER_CH_LEN)
> > +
> > +#define STARFIVE_CLOCK_SOURCE_RATING 200
> > +#define STARFIVE_VALID_BITS 32
> > +#define STARFIVE_DELAY_US 0
> > +#define STARFIVE_TIMEOUT_US 10000
> > +#define STARFIVE_CLOCKEVENT_RATING 300
> > +#define STARFIVE_TIMER_MAX_TICKS 0xffffffff
> > +#define STARFIVE_TIMER_MIN_TICKS 0xf
> > +
> > +#define STARFIVE_TIMER_JH7110_INT_STATUS 0x00 /* RO[0:4]: Interrupt Status for channel0~4 */
> > +#define STARFIVE_TIMER_JH7110_CTL 0x04 /* RW[0]: 0-continuous run, 1-single run */
> > +#define STARFIVE_TIMER_JH7110_LOAD 0x08 /* RW: load value to counter */
> > +#define STARFIVE_TIMER_JH7110_ENABLE 0x10 /* RW[0]: timer enable register */
> > +#define STARFIVE_TIMER_JH7110_RELOAD 0x14 /* RW: write 1 or 0 both reload counter */
> > +#define STARFIVE_TIMER_JH7110_VALUE 0x18 /* RO: timer value register */
> > +#define STARFIVE_TIMER_JH7110_INT_CLR 0x20 /* RW: timer interrupt clear register */
> > +#define STARFIVE_TIMER_JH7110_INT_MASK 0x24 /* RW[0]: timer interrupt mask register */
> > +#define STARFIVE_TIMER_JH7110_INT_CLR_AVA_MASK BIT(1)
> > +
> > +enum STARFIVE_TIMER_CH {
> > + STARFIVE_TIMER_CH_0 = 0,
> > + STARFIVE_TIMER_CH_1,
> > + STARFIVE_TIMER_CH_2,
> > + STARFIVE_TIMER_CH_3,
> > + STARFIVE_TIMER_CH_4,
> > + STARFIVE_TIMER_CH_5,
> > + STARFIVE_TIMER_CH_6,
> > + STARFIVE_TIMER_CH_7,
> > + STARFIVE_TIMER_CH_MAX
> > +};
> > +
> > +enum STARFIVE_TIMER_INTMASK {
> > + STARFIVE_TIMER_INTMASK_DIS = 0,
> > + STARFIVE_TIMER_INTMASK_ENA = 1
> > +};
> > +
> > +enum STARFIVE_TIMER_MOD {
> > + STARFIVE_TIMER_MOD_CONTIN = 0,
> > + STARFIVE_TIMER_MOD_SINGLE = 1
> > +};
> > +
> > +enum STARFIVE_TIMER_CTL_EN {
> > + STARFIVE_TIMER_DIS = 0,
> > + STARFIVE_TIMER_ENA = 1
> > +};
> > +
> > +struct starfive_timer_chan_base {
> > + /* Resgister */
> > + unsigned int ctrl;
> > + unsigned int load;
> > + unsigned int enable;
> > + unsigned int reload;
> > + unsigned int value;
> > + unsigned int intclr;
> > + unsigned int intmask;
> > +
> > + unsigned int channel_num; /* timer channel numbers */
> > + unsigned int channel_base[];
> > +};
> > +
> > +struct starfive_clkevt {
> > + struct clock_event_device evt;
> > + struct clk *clk;
> > + char name[20];
> > + int irq;
> > + u32 periodic;
> > + u32 rate;
> > + u32 reload_val;
> > + void __iomem *base;
> > + void __iomem *ctrl;
> > + void __iomem *load;
> > + void __iomem *enable;
> > + void __iomem *reload;
> > + void __iomem *value;
> > + void __iomem *intclr;
> > + void __iomem *intmask;
> > +};
> > +
> > +struct starfive_timer_priv {
> > + struct device *dev;
> > + void __iomem *base;
> > + struct starfive_clkevt clkevt[];
> > +};
> > +
> > +#endif /* __STARFIVE_TIMER_H__ */
>
> Hi Daniel and Thomas,
>
> I have submitted patches for Timer driver. Could you please help to review and give your comments?
> Thanks.
>
> Best regards,
> Xingyu Wu
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
More information about the linux-riscv
mailing list