[PATCH v4 0/4] StarFive's Pulse Width Modulation driver support
William Qiu
william.qiu at starfivetech.com
Thu Jun 1 01:51:50 PDT 2023
Hi,
This patchset adds initial rudimentary support for the StarFive
Pulse Width Modulation controller driver. And this driver will
be used in StarFive's VisionFive 2 board.The first patch add
Documentations for the device and Patch 2 adds device probe for
the module.
Changes v2->v3:
- Rebased to v6.4rc3.
- Sorted the header files in alphabetic order.
- Changed iowrite32() to writel().
- Added a way to turn off.
- Moified polarity inversion implementation.
- Added 7100 support.
- Added dts patches.
- Used the various helpers in linux/math.h.
- Corrected formatting problems.
- Renamed dtbinding to 'starfive,jh7100-pwm.yaml'.
- Dropped the redundant code.
Changes v2->v3:
- Fixed some formatting issues.
Changes v1->v2:
- Renamed the dt-binding 'pwm-starfive.yaml' to 'starfive,jh7110-pwm.yaml'.
- Dropped the compatible's Items.
- Dropped the unuse defines.
- Modified the code to follow the Linux coding style.
- Changed return value to dev_err_probe.
- Dropped the unnecessary local variable.
The patch series is based on v6.4rc3.
William Qiu (4):
dt-bindings: pwm: Add StarFive PWM module
pwm: starfive: Add PWM driver support
riscv: dts: starfive: jh7110: Add PWM node and pins configuration
riscv: dts: starfive: jh7100: Add PWM node and pins configuration
.../bindings/pwm/starfive,jh7100-pwm.yaml | 55 +++++
MAINTAINERS | 7 +
.../boot/dts/starfive/jh7100-common.dtsi | 24 +++
arch/riscv/boot/dts/starfive/jh7100.dtsi | 9 +
.../jh7110-starfive-visionfive-2.dtsi | 22 ++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 9 +
drivers/pwm/Kconfig | 9 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-starfive-ptc.c | 192 ++++++++++++++++++
9 files changed, 328 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/starfive,jh7100-pwm.yaml
create mode 100644 drivers/pwm/pwm-starfive-ptc.c
--
2.34.1
More information about the linux-riscv
mailing list