[PATCH] watchdog: Enable COMPILE_TEST for more drivers

Guenter Roeck linux at roeck-us.net
Fri Jul 28 13:50:36 PDT 2023


On 7/28/23 12:50, Rob Herring wrote:
> There's quite a few watchdog drivers which are easily enabled for
> COMPILE_TEST, so let's enable them.
> 
> Signed-off-by: Rob Herring <robh at kernel.org>
> ---
> Passed allyesconfig builds on arm, arm64, x86, riscv, powerpc, sparc

Last time I tried this we ended up having to revert most of them.
Let's see if this time is different.

Reviewed-by: Guenter Roeck <linux at roeck-us.net>

> ---
>   drivers/watchdog/Kconfig         | 80 ++++++++++++++++----------------
>   drivers/watchdog/loongson1_wdt.c |  1 +
>   2 files changed, 41 insertions(+), 40 deletions(-)
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index ee97d89dfc11..ce293378e548 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -307,7 +307,7 @@ config XILINX_WATCHDOG
>   config XILINX_WINDOW_WATCHDOG
>   	tristate "Xilinx window watchdog timer"
>   	depends on HAS_IOMEM
> -	depends on ARM64
> +	depends on ARM64 || COMPILE_TEST
>   	select WATCHDOG_CORE
>   	help
>   	  Window watchdog driver for the versal_wwdt IP core.
> @@ -343,7 +343,7 @@ config RAVE_SP_WATCHDOG
>   
>   config MLX_WDT
>   	tristate "Mellanox Watchdog"
> -	depends on MELLANOX_PLATFORM
> +	depends on MELLANOX_PLATFORM || COMPILE_TEST
>   	select WATCHDOG_CORE
>   	select REGMAP
>   	help
> @@ -493,7 +493,7 @@ config FTWDT010_WATCHDOG
>   
>   config IXP4XX_WATCHDOG
>   	tristate "IXP4xx Watchdog"
> -	depends on ARCH_IXP4XX
> +	depends on ARCH_IXP4XX || (ARM && COMPILE_TEST)
>   	select WATCHDOG_CORE
>   	help
>   	  Say Y here if to include support for the watchdog timer
> @@ -529,7 +529,7 @@ config S3C2410_WATCHDOG
>   
>   config SA1100_WATCHDOG
>   	tristate "SA1100/PXA2xx watchdog"
> -	depends on ARCH_SA1100 || ARCH_PXA
> +	depends on ARCH_SA1100 || ARCH_PXA || COMPILE_TEST
>   	help
>   	  Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
>   	  reboot your system when timeout is reached.
> @@ -720,7 +720,7 @@ config IMX2_WDT
>   config IMX_SC_WDT
>   	tristate "IMX SC Watchdog"
>   	depends on HAVE_ARM_SMCCC
> -	depends on IMX_SCU
> +	depends on IMX_SCU || COMPILE_TEST
>   	select WATCHDOG_CORE
>   	help
>   	  This is the driver for the system controller watchdog
> @@ -931,7 +931,7 @@ config ASPEED_WATCHDOG
>   
>   config STM32_WATCHDOG
>   	tristate "STM32 Independent WatchDoG (IWDG) support"
> -	depends on ARCH_STM32
> +	depends on ARCH_STM32 || COMPILE_TEST
>   	select WATCHDOG_CORE
>   	default y
>   	help
> @@ -1065,7 +1065,7 @@ config ACQUIRE_WDT
>   
>   config ADVANTECH_WDT
>   	tristate "Advantech SBC Watchdog Timer"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   	  If you are configuring a Linux kernel for the Advantech single-board
>   	  computer, say `Y' here to support its built-in watchdog timer
> @@ -1074,14 +1074,14 @@ config ADVANTECH_WDT
>   
>   config ADVANTECH_EC_WDT
>   	tristate "Advantech Embedded Controller Watchdog Timer"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   		This driver supports Advantech products with ITE based Embedded Controller.
>   		It does not support Advantech products with other ECs or without EC.
>   
>   config ALIM1535_WDT
>   	tristate "ALi M1535 PMU Watchdog Timer"
> -	depends on X86 && PCI
> +	depends on (X86 || COMPILE_TEST) && PCI
>   	help
>   	  This is the driver for the hardware watchdog on the ALi M1535 PMU.
>   
> @@ -1105,7 +1105,7 @@ config ALIM7101_WDT
>   
>   config EBC_C384_WDT
>   	tristate "WinSystems EBC-C384 Watchdog Timer"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	select ISA_BUS_API
>   	select WATCHDOG_CORE
>   	help
> @@ -1115,7 +1115,7 @@ config EBC_C384_WDT
>   
>   config EXAR_WDT
>   	tristate "Exar Watchdog Timer"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	select WATCHDOG_CORE
>   	help
>   	  Enables watchdog timer support for the watchdog timer present
> @@ -1126,7 +1126,7 @@ config EXAR_WDT
>   
>   config F71808E_WDT
>   	tristate "Fintek F718xx, F818xx Super I/O Watchdog"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	select WATCHDOG_CORE
>   	help
>   	  This is the driver for the hardware watchdog on the Fintek F71808E,
> @@ -1138,7 +1138,7 @@ config F71808E_WDT
>   
>   config SP5100_TCO
>   	tristate "AMD/ATI SP5100 TCO Timer/Watchdog"
> -	depends on X86 && PCI
> +	depends on (X86 || COMPILE_TEST) && PCI
>   	select WATCHDOG_CORE
>   	help
>   	  Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO
> @@ -1177,7 +1177,7 @@ config SC520_WDT
>   
>   config SBC_FITPC2_WATCHDOG
>   	tristate "Compulab SBC-FITPC2 watchdog"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   	  This is the driver for the built-in watchdog timer on the fit-PC2,
>   	  fit-PC2i, CM-iAM single-board computers made by Compulab.
> @@ -1202,7 +1202,7 @@ config SBC_FITPC2_WATCHDOG
>   
>   config EUROTECH_WDT
>   	tristate "Eurotech CPU-1220/1410 Watchdog Timer"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   	  Enable support for the watchdog timer on the Eurotech CPU-1220 and
>   	  CPU-1410 cards.  These are PC/104 SBCs. Spec sheets and product
> @@ -1210,7 +1210,7 @@ config EUROTECH_WDT
>   
>   config IB700_WDT
>   	tristate "IB700 SBC Watchdog Timer"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   	  This is the driver for the hardware watchdog on the IB700 Single
>   	  Board Computer produced by TMC Technology (www.tmc-uk.com). This
> @@ -1227,7 +1227,7 @@ config IB700_WDT
>   
>   config IBMASR
>   	tristate "IBM Automatic Server Restart"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   	  This is the driver for the IBM Automatic Server Restart watchdog
>   	  timer built-in into some eServer xSeries machines.
> @@ -1237,7 +1237,7 @@ config IBMASR
>   
>   config WAFER_WDT
>   	tristate "ICP Single Board Computer Watchdog Timer"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   	  This is a driver for the hardware watchdog on the ICP Single
>   	  Board Computer. This driver is working on (at least) the following
> @@ -1259,7 +1259,7 @@ config I6300ESB_WDT
>   
>   config IE6XX_WDT
>   	tristate "Intel Atom E6xx Watchdog"
> -	depends on X86 && PCI
> +	depends on (X86 || COMPILE_TEST) && PCI
>   	select WATCHDOG_CORE
>   	select MFD_CORE
>   	select LPC_SCH
> @@ -1319,7 +1319,7 @@ config ITCO_VENDOR_SUPPORT
>   
>   config IT8712F_WDT
>   	tristate "IT8712F (Smart Guardian) Watchdog Timer"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   	  This is the driver for the built-in watchdog timer on the IT8712F
>   	  Super I/0 chipset used on many motherboards.
> @@ -1332,7 +1332,7 @@ config IT8712F_WDT
>   
>   config IT87_WDT
>   	tristate "IT87 Watchdog Timer"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	select WATCHDOG_CORE
>   	help
>   	  This is the driver for the hardware watchdog on the ITE IT8607,
> @@ -1350,7 +1350,7 @@ config IT87_WDT
>   config HP_WATCHDOG
>   	tristate "HP ProLiant iLO2+ Hardware Watchdog Timer"
>   	select WATCHDOG_CORE
> -	depends on (ARM64 || X86) && PCI
> +	depends on (ARM64 || X86 || COMPILE_TEST) && PCI
>   	help
>   	  A software monitoring watchdog and NMI handling driver. This driver
>   	  will detect lockups and provide a stack trace. This is a driver that
> @@ -1380,7 +1380,7 @@ config KEMPLD_WDT
>   
>   config SC1200_WDT
>   	tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   	  This is a driver for National Semiconductor PC87307/PC97307 hardware
>   	  watchdog cards as found on the SC1200. This watchdog is mainly used
> @@ -1403,7 +1403,7 @@ config SCx200_WDT
>   
>   config PC87413_WDT
>   	tristate "NS PC87413 watchdog"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   	  This is the driver for the hardware watchdog on the PC87413 chipset
>   	  This watchdog simply watches your kernel to make sure it doesn't
> @@ -1417,7 +1417,7 @@ config PC87413_WDT
>   
>   config NV_TCO
>   	tristate "nVidia TCO Timer/Watchdog"
> -	depends on X86 && PCI
> +	depends on (X86 || COMPILE_TEST) && PCI
>   	help
>   	  Hardware driver for the TCO timer built into the nVidia Hub family
>   	  (such as the MCP51).  The TCO (Total Cost of Ownership) timer is a
> @@ -1446,7 +1446,7 @@ config RDC321X_WDT
>   
>   config 60XX_WDT
>   	tristate "SBC-60XX Watchdog Timer"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   	  This driver can be used with the watchdog timer found on some
>   	  single board computers, namely the 6010 PII based computer.
> @@ -1486,7 +1486,7 @@ config SBC7240_WDT
>   
>   config CPU5_WDT
>   	tristate "SMA CPU5 Watchdog"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   	  TBD.
>   	  To compile this driver as a module, choose M here: the
> @@ -1494,7 +1494,7 @@ config CPU5_WDT
>   
>   config SMSC_SCH311X_WDT
>   	tristate "SMSC SCH311X Watchdog Timer"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   	  This is the driver for the hardware watchdog timer on the
>   	  SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
> @@ -1506,7 +1506,7 @@ config SMSC_SCH311X_WDT
>   
>   config SMSC37B787_WDT
>   	tristate "Winbond SMsC37B787 Watchdog Timer"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   	  This is the driver for the hardware watchdog component on the
>   	  Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
> @@ -1526,7 +1526,7 @@ config SMSC37B787_WDT
>   
>   config TQMX86_WDT
>   	tristate "TQ-Systems TQMX86 Watchdog Timer"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	select WATCHDOG_CORE
>   	help
>   	  This is the driver for the hardware watchdog timer in the TQMX86 IO
> @@ -1539,7 +1539,7 @@ config TQMX86_WDT
>   
>   config VIA_WDT
>   	tristate "VIA Watchdog Timer"
> -	depends on X86 && PCI
> +	depends on (X86 || COMPILE_TEST) && PCI
>   	select WATCHDOG_CORE
>   	help
>   	  This is the driver for the hardware watchdog timer on VIA
> @@ -1552,7 +1552,7 @@ config VIA_WDT
>   
>   config W83627HF_WDT
>   	tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	select WATCHDOG_CORE
>   	help
>   	  This is the driver for the hardware watchdog on the following
> @@ -1582,7 +1582,7 @@ config W83627HF_WDT
>   
>   config W83877F_WDT
>   	tristate "W83877F (EMACS) Watchdog Timer"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   	  This is the driver for the hardware watchdog on the W83877F chipset
>   	  as used in EMACS PC-104 motherboards (and likely others).  This
> @@ -1597,7 +1597,7 @@ config W83877F_WDT
>   
>   config W83977F_WDT
>   	tristate "W83977F (PCM-5335) Watchdog Timer"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   	  This is the driver for the hardware watchdog on the W83977F I/O chip
>   	  as used in AAEON's PCM-5335 SBC (and likely others).  This
> @@ -1610,7 +1610,7 @@ config W83977F_WDT
>   
>   config MACHZ_WDT
>   	tristate "ZF MachZ Watchdog"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   	  If you are using a ZF Micro MachZ processor, say Y here, otherwise
>   	  N.  This is the driver for the watchdog timer built-in on that
> @@ -1623,7 +1623,7 @@ config MACHZ_WDT
>   
>   config SBC_EPX_C3_WATCHDOG
>   	tristate "Winsystems SBC EPX-C3 watchdog"
> -	depends on X86
> +	depends on X86 || COMPILE_TEST
>   	help
>   	  This is the driver for the built-in watchdog timer on the EPX-C3
>   	  Single-board computer made by Winsystems, Inc.
> @@ -1738,7 +1738,7 @@ config INDYDOG
>   
>   config JZ4740_WDT
>   	tristate "Ingenic jz4740 SoC hardware watchdog"
> -	depends on MIPS
> +	depends on MIPS || COMPILE_TEST
>   	depends on COMMON_CLK
>   	select WATCHDOG_CORE
>   	select MFD_SYSCON
> @@ -1822,7 +1822,7 @@ config BCM_KONA_WDT
>   
>   config BCM_KONA_WDT_DEBUG
>   	bool "DEBUGFS support for BCM Kona Watchdog"
> -	depends on BCM_KONA_WDT
> +	depends on BCM_KONA_WDT || COMPILE_TEST
>   	help
>   	  If enabled, adds /sys/kernel/debug/bcm_kona_wdt/info which provides
>   	  access to the driver's internal data structures as well as watchdog
> @@ -1863,7 +1863,7 @@ config LANTIQ_WDT
>   
>   config LOONGSON1_WDT
>   	tristate "Loongson1 SoC hardware watchdog"
> -	depends on MACH_LOONGSON32
> +	depends on MACH_LOONGSON32 || COMPILE_TEST
>   	select WATCHDOG_CORE
>   	help
>   	  Hardware driver for the Loongson1 SoC Watchdog Timer.
> @@ -1877,7 +1877,7 @@ config RALINK_WDT
>   
>   config GXP_WATCHDOG
>   	tristate "HPE GXP watchdog support"
> -	depends on ARCH_HPE_GXP
> +	depends on ARCH_HPE_GXP || COMPILE_TEST
>   	select WATCHDOG_CORE
>   	help
>   	  Say Y here to include support for the watchdog timer
> diff --git a/drivers/watchdog/loongson1_wdt.c b/drivers/watchdog/loongson1_wdt.c
> index 4ac7810a314d..0587ff44d3a1 100644
> --- a/drivers/watchdog/loongson1_wdt.c
> +++ b/drivers/watchdog/loongson1_wdt.c
> @@ -4,6 +4,7 @@
>    */
>   
>   #include <linux/clk.h>
> +#include <linux/io.h>
>   #include <linux/module.h>
>   #include <linux/of.h>
>   #include <linux/platform_device.h>




More information about the linux-riscv mailing list