[PATCH v3 0/8] Add Sipeed Lichee Pi 4A RISC-V board support

Drew Fustini dfustini at baylibre.com
Thu Jul 27 17:11:08 PDT 2023


On Thu, Jul 27, 2023 at 08:54:59AM +0800, Xi Ruoyao wrote:
> On Thu, 2023-07-27 at 08:14 +0800, Xi Ruoyao wrote:
> > On Wed, 2023-07-26 at 23:00 +0800, Jisheng Zhang wrote:
> > > which dts r u using? see below.
> > > 
> > > > 
> > > > Or maybe my toolchain (GCC 13.1.0, Binutils-2.40, with no patches) can
> > > > miscompile the kernel?
> > 
> > /* snip */
> > 
> > > > Boot HART ID              : 0
> > > > Boot HART Domain          : root
> > > > Boot HART Priv Version    : v1.11
> > > > Boot HART Base ISA        : rv64imafdcvx
> > > 
> > > what? I don't think the mainline dts provide v and x. 
> > 
> > I copied the compiled arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dtb
> > into /boot and loaded it with u-boot "load" command onto 0x46000000, and
> > passed this address to the booti command.
> > 
> > But maybe I've copied the wrong file or made some other mistake... I'll
> > recheck.
> 
> Hmm, and if I read OpenSBI code correctly, this line reflects the
> content of the misa CSR, not the DT riscv,isa value.
> 
> The log of successful boot provided by Drew also contains
> "rv64imafdcvx":
> 
> https://gist.github.com/pdp7/23259595a7570f1f11086d286e16dfb6

In case it helps, the thead fork of u-boot contains an important file
include/configs/light-c910.h that defines the boot scripts for each
board. Here is the BeagleV Ahead:
https://git.beagleboard.org/beaglev-ahead/beaglev-ahead-u-boot/-/blob/beaglev-v2020.01-1.1.2/include/configs/light-c910.h#L361

It might give some clues as to want commands to try.

>From the lpi4a config:
https://github.com/revyos/thead-u-boot/blob/09e2c3f93f1a64c10ca51d9b9c0c22fbc0947c43/configs/light_lpi4a_defconfig

It looks like it sets:
CONFIG_TARGET_LIGHT_FM_C910_LPI4A=y

And that corresponds to:
https://github.com/revyos/thead-u-boot/blob/09e2c3f93f1a64c10ca51d9b9c0c22fbc0947c43/include/configs/light-c910.h#L425

Anyways, I finally got my Lichee Pi 4a out of the box, and I am going
to try it out too.

-Drew



More information about the linux-riscv mailing list