[PATCH v2 0/4] Add support for Allwinner D1 CAN controllers

John Watts contact at jookia.org
Fri Jul 21 15:15:49 PDT 2023


This patch series adds support for the Allwinner D1 CAN controllers.
It requires adding a new device tree compatible and driver support to
work around some hardware quirks.

This has been tested on the Mango Pi MQ Dual running a T113 and a Lichee
Panel 86 running a D1.

Changes in v2:
- Re-ordered patches to work with bisecting
- Fixed device tree label underscores
- Fixed email headers

John Watts (4):
  dt-bindings: net: can: Add support for Allwinner D1 CAN controller
  riscv: dts: allwinner: d1: Add CAN controller nodes
  can: sun4i_can: Add acceptance register quirk
  can: sun4i_can: Add support for the Allwinner D1

 .../net/can/allwinner,sun4i-a10-can.yaml      |  6 ++--
 .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    | 30 +++++++++++++++++++
 drivers/net/can/Kconfig                       |  4 +--
 drivers/net/can/sun4i_can.c                   | 22 ++++++++++++--
 4 files changed, 55 insertions(+), 7 deletions(-)

-- 
2.41.0




More information about the linux-riscv mailing list