[PATCH v1 5/9] dt-bindings: PLDA: Add PLDA XpressRICH PCIe host controller

Minda Chen minda.chen at starfivetech.com
Wed Jul 19 03:20:53 PDT 2023


Add PLDA XpressRICH host controller dt-bindings. Both Microchip
PolarFire SoC and StarFive JH7110 SoC are using PLDA XpressRICH
PCIe host controller IP.

Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
Reviewed-by: Hal Feng <hal.feng at starfivetech.com>
---
 .../pci/plda,xpressrich-pcie-host.yaml        | 66 +++++++++++++++++++
 1 file changed, 66 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml

diff --git a/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml
new file mode 100644
index 000000000000..10a10862a078
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/plda,xpressrich-pcie-host.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/plda,xpressrich-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PLDA XpressRICH PCIe host controller
+
+maintainers:
+  - Daire McNamara <daire.mcnamara at microchip.com>
+  - Minda Chen <minda.chen at starfivetech.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: plda,xpressrich-pcie-common.yaml#
+  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+
+properties:
+  compatible:
+    const: plda,xpressrich-pcie-host
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#interrupt-cells"
+  - interrupts
+  - interrupt-map-mask
+  - interrupt-map
+  - msi-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    soc {
+            #address-cells = <2>;
+            #size-cells = <2>;
+            pcie0: pcie at 12000000 {
+                    compatible = "plda,xpressrich-pcie-host";
+                    reg = <0x0 0x12000000 0x0 0x00010000>,
+                          <0x0 0x43000000 0x0 0x00010000>;
+                    reg-names = "host", "cfg";
+                    ranges = <0x03000000 0x0 0x88000000 0x0 0x88000000 0x0 0x04000000>;
+                    device_type = "pci";
+                    #address-cells = <3>;
+                    #size-cells = <2>;
+                    #interrupt-cells = <1>;
+                    interrupts = <131>;
+                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                    interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+                                    <0 0 0 2 &pcie_intc0 1>,
+                                    <0 0 0 3 &pcie_intc0 2>,
+                                    <0 0 0 4 &pcie_intc0 3>;
+                    interrupt-parent = <&plic0>;
+                    msi-parent = <&pcie0>;
+                    msi-controller;
+                    bus-range = <0x00 0x7f>;
+
+                    pcie_intc0: interrupt-controller {
+                        #address-cells = <0>;
+                        #interrupt-cells = <1>;
+                        interrupt-controller;
+                    };
+            };
+    };
-- 
2.17.1




More information about the linux-riscv mailing list