[PATCH v6 00/11] KVM: arm64: Add support for FEAT_TLBIRANGE

Raghavendra Rao Ananta rananta at google.com
Fri Jul 14 19:02:07 PDT 2023


On Fri, Jul 14, 2023 at 5:54 PM Raghavendra Rao Ananta
<rananta at google.com> wrote:
>
> In certain code paths, KVM/ARM currently invalidates the entire VM's
> page-tables instead of just invalidating a necessary range. For example,
> when collapsing a table PTE to a block PTE, instead of iterating over
> each PTE and flushing them, KVM uses 'vmalls12e1is' TLBI operation to
> flush all the entries. This is inefficient since the guest would have
> to refill the TLBs again, even for the addresses that aren't covered
> by the table entry. The performance impact would scale poorly if many
> addresses in the VM is going through this remapping.
>
> For architectures that implement FEAT_TLBIRANGE, KVM can replace such
> inefficient paths by performing the invalidations only on the range of
> addresses that are in scope. This series tries to achieve the same in
> the areas of stage-2 map, unmap and write-protecting the pages.
>
> As suggested by Oliver in the original v5 of the series [1], I'm
> reposting the series by including v2 of David Matlack's 'KVM: Add a
> common API for range-based TLB invalidation' series [2].
>
> Patches 1-4 includes David M.'s patches 1, 2, 6, and 7 from [2].
>
> Patch-5 refactors the core arm64's __flush_tlb_range() to be used by
> other entities.
>
> Patch-6,7 adds a range-based TLBI mechanism for KVM (VHE and nVHE).
>
> Patch-8 implements the kvm_arch_flush_remote_tlbs_range() for arm64.
>
> Patch-9 aims to flush only the memslot that undergoes a write-protect,
> instead of the entire VM.
>
> Patch-10 operates on stage2_try_break_pte() to use the range based
> TLBI instructions when collapsing a table entry. The map path is the
> immediate consumer of this when KVM remaps a table entry into a block.
>
> Patch-11 modifies the stage-2 unmap path in which, if the system
> supports
> FEAT_TLBIRANGE, the TLB invalidations are skipped during the page-table.
> walk. Instead it's done in one go after the entire walk is finished.
>
> The series is based off of upstream v6.5-rc1.
>
> The performance evaluation was done on a hardware that supports
> FEAT_TLBIRANGE, on a VHE configuration, using a modified
> kvm_page_table_test.
> The modified version updates the guest code in the ADJUST_MAPPINGS case
> to not only access this page but also to access up to 512 pages
> backwards
> for every new page it iterates through. This is done to test the effect
> of TLBI misses after KVM has handled a fault.
>
> The series captures the impact in the map and unmap paths as described
> above.
>
> $ kvm_page_table_test -m 2 -v 128 -s anonymous_hugetlb_2mb -b $i
>
> +--------+------------------------------+------------------------------+
> | mem_sz |    ADJUST_MAPPINGS (s)       |      Unmap VM (s)            |
> |  (GB)  | Baseline | Baseline + series | Baseline | Baseline + series |
> +--------+----------|-------------------+------------------------------+
> |   1    |   3.33   |   3.22            | 0.009     | 0.005            |
> |   2    |   7.39   |   7.32            | 0.012     | 0.006            |
> |   4    |  13.49   |  10.50            | 0.017     | 0.008            |
> |   8    |  21.60   |  21.50            | 0.027     | 0.011            |
> |  16    |  57.02   |  43.63            | 0.046     | 0.018            |
> |  32    |  95.92   |  83.26            | 0.087     | 0.030            |
> |  64    | 199.57   | 165.14            | 0.146     | 0.055            |
> | 128    | 423.65   | 349.37            | 0.280     | 0.100            |
> +--------+----------+-------------------+----------+-------------------+
>
> $ kvm_page_table_test -m 2 -b 128G -s anonymous_hugetlb_2mb -v $i
>
> +--------+------------------------------+
> | vCPUs  |    ADJUST_MAPPINGS (s)       |
> |        | Baseline | Baseline + series |
> +--------+----------|-------------------+
> |   1    | 111.44   | 114.63            |
> |   2    | 102.88   |  74.64            |
> |   4    | 134.83   |  98.78            |
> |   8    |  98.81   |  95.01            |
> |  16    | 127.41   |  99.05            |
> |  32    | 105.35   |  91.75            |
> |  64    | 201.13   | 163.63            |
> | 128    | 423.65   | 349.37            |
> +--------+----------+-------------------+
>
> For the ADJUST_MAPPINGS cases, which maps back the 4K table entries to
> 2M hugepages, the series sees an average improvement of ~15%. For
> unmapping 2M hugepages, we see a gain of 2x to 3x.
>
> $ kvm_page_table_test -m 2 -b $i
>
> +--------+------------------------------+
> | mem_sz |      Unmap VM (s)            |
> |  (GB)  | Baseline | Baseline + series |
> +--------+------------------------------+
> |   1    |  0.54    |  0.13             |
> |   2    |  1.07    |  0.25             |
> |   4    |  2.10    |  0.47             |
> |   8    |  4.19    |  0.92             |
> |  16    |  8.35    |  1.92             |
> |  32    | 16.66    |  3.61             |
> |  64    | 32.36    |  7.62             |
> | 128    | 64.65    | 14.39             |
> +--------+----------+-------------------+
>
> The series sees an average gain of 4x when the guest backed by
> PAGE_SIZE (4K) pages.
>
> Other testing:
>  - Booted on x86_64 and ran KVM selftests.
>  - Build tested for MIPS and RISCV architectures against defconfig.
>
> Cc: David Matlack <dmatlack at google.com>
>
> v6:
This should've been 'v5 (RESEND)' with the link:
https://lore.kernel.org/all/20230621175002.2832640-1-rananta@google.com/

- Raghavendra
> Thanks, Gavin for the suggestions:
> - Adjusted the comment on patch-2 to align with the code.
> - Fixed checkpatch.pl warning on patch-5.
>
> v5:
> https://lore.kernel.org/all/20230606192858.3600174-1-rananta@google.com/
> Thank you, Marc and Oliver for the comments
> - Introduced a helper, kvm_tlb_flush_vmid_range(), to handle
>   the decision of using range-based TLBI instructions or
>   invalidating the entire VMID, rather than depending on
>   __kvm_tlb_flush_vmid_range() for it.
> - kvm_tlb_flush_vmid_range() splits the range-based invalidations
>   if the requested range exceeds MAX_TLBI_RANGE_PAGES.
> - All the users in need of invalidating the TLB upon a range
>   now depends on kvm_tlb_flush_vmid_range() rather than directly
>   on __kvm_tlb_flush_vmid_range().
> - stage2_unmap_defer_tlb_flush() introduces a WARN_ON() to
>   track if there's any change in TLBIRANGE or FWB support
>   during the unmap process as the features are based on
>   alternative patching and the TLBI operations solely depend
>   on this check.
> - Corrected an incorrect hunk being present on v4's patch-3.
> - Updated the patches changelog and code comments as per the
>   suggestions.
>
> v4:
> https://lore.kernel.org/all/20230519005231.3027912-1-rananta@google.com/
> Thanks again, Oliver for all the comments
> - Updated the __kvm_tlb_flush_vmid_range() implementation for
>   nVHE to adjust with the modfied __tlb_switch_to_guest() that
>   accepts a new 'bool nsh' arg.
> - Renamed stage2_put_pte() to stage2_unmap_put_pte() and removed
>   the 'skip_flush' argument.
> - Defined stage2_unmap_defer_tlb_flush() to check if the PTE
>   flushes can be deferred during the unmap table walk. It's
>   being called from stage2_unmap_put_pte() and
>   kvm_pgtable_stage2_unmap().
> - Got rid of the 'struct stage2_unmap_data'.
>
> v3:
> https://lore.kernel.org/all/20230414172922.812640-1-rananta@google.com/
> Thanks, Oliver for all the suggestions.
> - The core flush API (__kvm_tlb_flush_vmid_range()) now checks if
>   the system support FEAT_TLBIRANGE or not, thus elimiating the
>   redundancy in the upper layers.
> - If FEAT_TLBIRANGE is not supported, the implementation falls
>   back to invalidating all the TLB entries with the VMID, instead
>   of doing an iterative flush for the range.
> - The kvm_arch_flush_remote_tlbs_range() doesn't return -EOPNOTSUPP
>   if the system doesn't implement FEAT_TLBIRANGE. It depends on
>   __kvm_tlb_flush_vmid_range() to do take care of the decisions
>   and return 0 regardless of the underlying feature support.
> - __kvm_tlb_flush_vmid_range() doesn't take 'level' as input to
>   calculate the 'stride'. Instead, it always assumes PAGE_SIZE.
> - Fast unmap path is eliminated. Instead, the existing unmap walker
>   is modified to skip the TLBIs during the walk, and do it all at
>   once after the walk, using the range-based instructions.
>
> v2:
> https://lore.kernel.org/all/20230206172340.2639971-1-rananta@google.com/
> - Rebased the series on top of David Matlack's series for common
>   TLB invalidation API[1].
> - Implement kvm_arch_flush_remote_tlbs_range() for arm64, by extending
>   the support introduced by [1].
> - Use kvm_flush_remote_tlbs_memslot() introduced by [1] to flush
>   only the current memslot after write-protect.
> - Modified the __kvm_tlb_flush_range() macro to accepts 'level' as an
>   argument to calculate the 'stride' instead of just using PAGE_SIZE.
> - Split the patch that introduces the range-based TLBI to KVM and the
>   implementation of IPA-based invalidation into its own patches.
> - Dropped the patch that tries to optimize the mmu notifiers paths.
> - Rename the function kvm_table_pte_flush() to
>   kvm_pgtable_stage2_flush_range(), and accept the range of addresses to
>   flush. [Oliver]
> - Drop the 'tlb_level' argument for stage2_try_break_pte() and directly
>   pass '0' as 'tlb_level' to kvm_pgtable_stage2_flush_range(). [Oliver]
>
> v1:
> https://lore.kernel.org/all/20230109215347.3119271-1-rananta@google.com/
>
> Thank you.
> Raghavendra
>
> [1]: https://lore.kernel.org/all/ZIrONR6cSegiK1e2@linux.dev/
> [2]:
> https://lore.kernel.org/linux-arm-kernel/20230126184025.2294823-1-dmatlack@google.com/
>
> David Matlack (4):
>   KVM: Rename kvm_arch_flush_remote_tlb() to
>     kvm_arch_flush_remote_tlbs()
>   KVM: arm64: Use kvm_arch_flush_remote_tlbs()
>   KVM: Allow range-based TLB invalidation from common code
>   KVM: Move kvm_arch_flush_remote_tlbs_memslot() to common code
>
> Raghavendra Rao Ananta (7):
>   arm64: tlb: Refactor the core flush algorithm of __flush_tlb_range
>   KVM: arm64: Implement  __kvm_tlb_flush_vmid_range()
>   KVM: arm64: Define kvm_tlb_flush_vmid_range()
>   KVM: arm64: Implement kvm_arch_flush_remote_tlbs_range()
>   KVM: arm64: Flush only the memslot after write-protect
>   KVM: arm64: Invalidate the table entries upon a range
>   KVM: arm64: Use TLBI range-based intructions for unmap
>
>  arch/arm64/include/asm/kvm_asm.h     |   3 +
>  arch/arm64/include/asm/kvm_host.h    |   6 ++
>  arch/arm64/include/asm/kvm_pgtable.h |  10 +++
>  arch/arm64/include/asm/tlbflush.h    | 109 ++++++++++++++-------------
>  arch/arm64/kvm/Kconfig               |   1 -
>  arch/arm64/kvm/arm.c                 |   6 --
>  arch/arm64/kvm/hyp/nvhe/hyp-main.c   |  11 +++
>  arch/arm64/kvm/hyp/nvhe/tlb.c        |  30 ++++++++
>  arch/arm64/kvm/hyp/pgtable.c         |  90 +++++++++++++++++++---
>  arch/arm64/kvm/hyp/vhe/tlb.c         |  23 ++++++
>  arch/arm64/kvm/mmu.c                 |  15 +++-
>  arch/mips/include/asm/kvm_host.h     |   4 +-
>  arch/mips/kvm/mips.c                 |  12 +--
>  arch/riscv/kvm/mmu.c                 |   6 --
>  arch/x86/include/asm/kvm_host.h      |   7 +-
>  arch/x86/kvm/mmu/mmu.c               |  25 ++----
>  arch/x86/kvm/mmu/mmu_internal.h      |   3 -
>  arch/x86/kvm/x86.c                   |   2 +-
>  include/linux/kvm_host.h             |  20 +++--
>  virt/kvm/Kconfig                     |   3 -
>  virt/kvm/kvm_main.c                  |  35 +++++++--
>  21 files changed, 290 insertions(+), 131 deletions(-)
>
> --
> 2.41.0.455.g037347b96a-goog
>



More information about the linux-riscv mailing list