[RESEND PATCH v5 05/11] arm64: tlb: Refactor the core flush algorithm of __flush_tlb_range
Raghavendra Rao Ananta
rananta at google.com
Wed Jul 5 11:21:52 PDT 2023
On Tue, Jul 4, 2023 at 5:11 PM Gavin Shan <gshan at redhat.com> wrote:
>
> On 6/22/23 03:49, Raghavendra Rao Ananta wrote:
> > Currently, the core TLB flush functionality of __flush_tlb_range()
> > hardcodes vae1is (and variants) for the flush operation. In the
> > upcoming patches, the KVM code reuses this core algorithm with
> > ipas2e1is for range based TLB invalidations based on the IPA.
> > Hence, extract the core flush functionality of __flush_tlb_range()
> > into its own macro that accepts an 'op' argument to pass any
> > TLBI operation, such that other callers (KVM) can benefit.
> >
> > No functional changes intended.
> >
> > Signed-off-by: Raghavendra Rao Ananta <rananta at google.com>
> > Reviewed-by: Catalin Marinas <catalin.marinas at arm.com>
> > ---
> > arch/arm64/include/asm/tlbflush.h | 108 +++++++++++++++---------------
> > 1 file changed, 55 insertions(+), 53 deletions(-)
> >
>
> With the following nits addressed:
>
> Reviewed-by: Gavin Shan <gshan at redhat.com>
>
> > diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
> > index 412a3b9a3c25d..4775378b6da1b 100644
> > --- a/arch/arm64/include/asm/tlbflush.h
> > +++ b/arch/arm64/include/asm/tlbflush.h
> > @@ -278,14 +278,61 @@ static inline void flush_tlb_page(struct vm_area_struct *vma,
> > */
> > #define MAX_TLBI_OPS PTRS_PER_PTE
> >
> > +/* When the CPU does not support TLB range operations, flush the TLB
> > + * entries one by one at the granularity of 'stride'. If the TLB
> > + * range ops are supported, then:
> > + *
> > + * 1. If 'pages' is odd, flush the first page through non-range
> > + * operations;
> > + *
> > + * 2. For remaining pages: the minimum range granularity is decided
> > + * by 'scale', so multiple range TLBI operations may be required.
> > + * Start from scale = 0, flush the corresponding number of pages
> > + * ((num+1)*2^(5*scale+1) starting from 'addr'), then increase it
> > + * until no pages left.
> > + *
> > + * Note that certain ranges can be represented by either num = 31 and
> > + * scale or num = 0 and scale + 1. The loop below favours the latter
> > + * since num is limited to 30 by the __TLBI_RANGE_NUM() macro.
> > + */
> > +#define __flush_tlb_range_op(op, start, pages, stride, \
> > + asid, tlb_level, tlbi_user) do { \
> > + int num = 0; \
> > + int scale = 0; \
> > + unsigned long addr; \
> > + \
> > + while (pages > 0) { \
> > + if (!system_supports_tlb_range() || \
> > + pages % 2 == 1) { \
> > + addr = __TLBI_VADDR(start, asid); \
> > + __tlbi_level(op, addr, tlb_level); \
> > + if (tlbi_user) \
> > + __tlbi_user_level(op, addr, tlb_level); \
> > + start += stride; \
> > + pages -= stride >> PAGE_SHIFT; \
> > + continue; \
> > + } \
> > + \
> > + num = __TLBI_RANGE_NUM(pages, scale); \
> > + if (num >= 0) { \
> > + addr = __TLBI_VADDR_RANGE(start, asid, scale, \
> > + num, tlb_level); \
> > + __tlbi(r##op, addr); \
> > + if (tlbi_user) \
> > + __tlbi_user(r##op, addr); \
> > + start += __TLBI_RANGE_PAGES(num, scale) << PAGE_SHIFT; \
> > + pages -= __TLBI_RANGE_PAGES(num, scale); \
> > + } \
> > + scale++; \
> > + } \
> > +} while (0)
> > +
>
> There is a warning reported from 'checkpatch.pl'.
>
> WARNING: suspect code indent for conditional statements (32, 8)
> #52: FILE: arch/arm64/include/asm/tlbflush.h:299:
> + asid, tlb_level, tlbi_user) do { \
> [...]
> + unsigned long addr; \
>
> total: 0 errors, 1 warnings, 125 lines checked
>
> You probably need to tweak it as below, to avoid the warning.
>
> #define __flush_tlb_range_op(op, start, pages, stride, \
> asid, tlb_level, tlbi_user) \
> do { \
>
Thanks for the suggestion, Gavin. I'll fix this.
- Raghavendra
>
> > static inline void __flush_tlb_range(struct vm_area_struct *vma,
> > unsigned long start, unsigned long end,
> > unsigned long stride, bool last_level,
> > int tlb_level)
> > {
> > - int num = 0;
> > - int scale = 0;
> > - unsigned long asid, addr, pages;
> > + unsigned long asid, pages;
> >
> > start = round_down(start, stride);
> > end = round_up(end, stride);
> > @@ -307,56 +354,11 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma,
> > dsb(ishst);
> > asid = ASID(vma->vm_mm);
> >
> > - /*
> > - * When the CPU does not support TLB range operations, flush the TLB
> > - * entries one by one at the granularity of 'stride'. If the TLB
> > - * range ops are supported, then:
> > - *
> > - * 1. If 'pages' is odd, flush the first page through non-range
> > - * operations;
> > - *
> > - * 2. For remaining pages: the minimum range granularity is decided
> > - * by 'scale', so multiple range TLBI operations may be required.
> > - * Start from scale = 0, flush the corresponding number of pages
> > - * ((num+1)*2^(5*scale+1) starting from 'addr'), then increase it
> > - * until no pages left.
> > - *
> > - * Note that certain ranges can be represented by either num = 31 and
> > - * scale or num = 0 and scale + 1. The loop below favours the latter
> > - * since num is limited to 30 by the __TLBI_RANGE_NUM() macro.
> > - */
> > - while (pages > 0) {
> > - if (!system_supports_tlb_range() ||
> > - pages % 2 == 1) {
> > - addr = __TLBI_VADDR(start, asid);
> > - if (last_level) {
> > - __tlbi_level(vale1is, addr, tlb_level);
> > - __tlbi_user_level(vale1is, addr, tlb_level);
> > - } else {
> > - __tlbi_level(vae1is, addr, tlb_level);
> > - __tlbi_user_level(vae1is, addr, tlb_level);
> > - }
> > - start += stride;
> > - pages -= stride >> PAGE_SHIFT;
> > - continue;
> > - }
> > -
> > - num = __TLBI_RANGE_NUM(pages, scale);
> > - if (num >= 0) {
> > - addr = __TLBI_VADDR_RANGE(start, asid, scale,
> > - num, tlb_level);
> > - if (last_level) {
> > - __tlbi(rvale1is, addr);
> > - __tlbi_user(rvale1is, addr);
> > - } else {
> > - __tlbi(rvae1is, addr);
> > - __tlbi_user(rvae1is, addr);
> > - }
> > - start += __TLBI_RANGE_PAGES(num, scale) << PAGE_SHIFT;
> > - pages -= __TLBI_RANGE_PAGES(num, scale);
> > - }
> > - scale++;
> > - }
> > + if (last_level)
> > + __flush_tlb_range_op(vale1is, start, pages, stride, asid, tlb_level, true);
> > + else
> > + __flush_tlb_range_op(vae1is, start, pages, stride, asid, tlb_level, true);
> > +
> > dsb(ish);
> > }
> >
>
> Thanks,
> Gavin
>
More information about the linux-riscv
mailing list