[PATCH v3 0/6] RISC-V: Apply Zicboz to clear_page

Jeff Law jlaw at ventanamicro.com
Mon Jan 30 10:30:38 PST 2023



On 1/30/23 05:01, Andrew Jones wrote:
> When the Zicboz extension is available we can more rapidly zero naturally
> aligned Zicboz block sized chunks of memory. As pages are always page
> aligned and are larger than any Zicboz block size will be, then
> clear_page() appears to be a good candidate for the extension. While cycle
> count and energy consumption should also be considered, we can be pretty
> certain that implementing clear_page() with the Zicboz extension is a win
> by comparing the new dynamic instruction count with its current count[1].
> Doing so we see that the new count is just over a quarter of the old count
> (see patch4's commit message for more details).
> 
> For those of you who reviewed v1[2], you may be looking for the memset()
> patches. As pointed out in v1, and a couple follow-up emails, it's not
> clear that patching memset() is a win yet. When I get a chance to test
> on real hardware with a comprehensive benchmark collection then I can
> post the memset() patches separately (assuming the benchmarks show it's
> worthwhile).
So a note.  On the userspace side we are using cboz for clearing memory 
in memset.  While the data is intermixed with other changes, there's a 
very significant drop in stores and a host of related low level 
performance counters and a notable uptick in gcc #5 performance from 
spec2017 which is particularly sensitive to memory clearing.  We haven't 
seen any performance regressions attributable to using cboz across 
spec2017's integer suite.

I believe our current threshold setting is to use cboz for chunks >= 128 
bytes.

Jeff



More information about the linux-riscv mailing list