[PATCH v3 4/6] RISC-V: Use Zicboz in clear_page when available

Andrew Jones ajones at ventanamicro.com
Mon Jan 30 04:01:26 PST 2023


Using memset() to zero a 4K page takes 563 total instructions
where 20 are branches. clear_page() with Zicboz takes 150 total
instructions where 16 are branches. We could reduce the numbers
by further unrolling, but, since the cboz block size isn't fixed,
we'd need a Duff device to ensure we don't execute too many
unrolled steps. Also, cbo.zero doesn't take an offset, so each
unrolled step requires it and an add instruction. This increases
the chance for icache misses if we unroll many times. For these
reasons we only unroll four times. Unrolling four times should be
safe as it supports cboz block sizes up to 1K when used with 4K
pages and it's only 24 to 32 bytes of unrolled instructions.

Another note about the Duff device idea is that it would probably
be best to store the number of steps needed at boot time and then
load the value in clear_page(). Calculating it in clear_page(),
particularly without the Zbb extension, would not be efficient.

Signed-off-by: Andrew Jones <ajones at ventanamicro.com>
Acked-by: Conor Dooley <conor.dooley at microchip.com>
---
 arch/riscv/Kconfig                | 13 +++++++++++
 arch/riscv/include/asm/insn-def.h |  4 ++++
 arch/riscv/include/asm/page.h     |  6 +++++-
 arch/riscv/lib/Makefile           |  1 +
 arch/riscv/lib/clear_page.S       | 36 +++++++++++++++++++++++++++++++
 5 files changed, 59 insertions(+), 1 deletion(-)
 create mode 100644 arch/riscv/lib/clear_page.S

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 33bbdc33cef8..3759a2f6edd5 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -432,6 +432,19 @@ config RISCV_ISA_ZICBOM
 
 	   If you don't know what to do here, say Y.
 
+config RISCV_ISA_ZICBOZ
+	bool "Zicboz extension support for faster zeroing of memory"
+	depends on !XIP_KERNEL && MMU
+	select RISCV_ALTERNATIVE
+	default y
+	help
+	   Enable the use of the ZICBOZ extension (cbo.zero instruction)
+	   when available.
+
+	   The Zicboz extension is used for faster zeroing of memory.
+
+	   If you don't know what to do here, say Y.
+
 config TOOLCHAIN_HAS_ZIHINTPAUSE
 	bool
 	default y
diff --git a/arch/riscv/include/asm/insn-def.h b/arch/riscv/include/asm/insn-def.h
index e01ab51f50d2..6960beb75f32 100644
--- a/arch/riscv/include/asm/insn-def.h
+++ b/arch/riscv/include/asm/insn-def.h
@@ -192,4 +192,8 @@
 	INSN_I(OPCODE_MISC_MEM, FUNC3(2), __RD(0),		\
 	       RS1(base), SIMM12(2))
 
+#define CBO_zero(base)						\
+	INSN_I(OPCODE_MISC_MEM, FUNC3(2), __RD(0),		\
+	       RS1(base), SIMM12(4))
+
 #endif /* __ASM_INSN_DEF_H */
diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h
index 9f432c1b5289..ccd168fe29d2 100644
--- a/arch/riscv/include/asm/page.h
+++ b/arch/riscv/include/asm/page.h
@@ -49,10 +49,14 @@
 
 #ifndef __ASSEMBLY__
 
+#ifdef CONFIG_RISCV_ISA_ZICBOZ
+void clear_page(void *page);
+#else
 #define clear_page(pgaddr)			memset((pgaddr), 0, PAGE_SIZE)
+#endif
 #define copy_page(to, from)			memcpy((to), (from), PAGE_SIZE)
 
-#define clear_user_page(pgaddr, vaddr, page)	memset((pgaddr), 0, PAGE_SIZE)
+#define clear_user_page(pgaddr, vaddr, page)	clear_page(pgaddr)
 #define copy_user_page(vto, vfrom, vaddr, topg) \
 			memcpy((vto), (vfrom), PAGE_SIZE)
 
diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
index 25d5c9664e57..9ee5e2ab5143 100644
--- a/arch/riscv/lib/Makefile
+++ b/arch/riscv/lib/Makefile
@@ -5,5 +5,6 @@ lib-y			+= memset.o
 lib-y			+= memmove.o
 lib-$(CONFIG_MMU)	+= uaccess.o
 lib-$(CONFIG_64BIT)	+= tishift.o
+lib-$(CONFIG_RISCV_ISA_ZICBOZ)	+= clear_page.o
 
 obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
diff --git a/arch/riscv/lib/clear_page.S b/arch/riscv/lib/clear_page.S
new file mode 100644
index 000000000000..49f29139a5b6
--- /dev/null
+++ b/arch/riscv/lib/clear_page.S
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2023 Ventana Micro Systems Inc.
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm.h>
+#include <asm/alternative-macros.h>
+#include <asm/hwcap.h>
+#include <asm/insn-def.h>
+#include <asm/page.h>
+
+/* void clear_page(void *page) */
+ENTRY(__clear_page)
+WEAK(clear_page)
+	li	a2, PAGE_SIZE
+	ALTERNATIVE("j .Lno_zicboz", "nop",
+		    0, RISCV_ISA_EXT_ZICBOZ, CONFIG_RISCV_ISA_ZICBOZ)
+	la	a1, riscv_cboz_block_size
+	lw	a1, 0(a1)
+	add	a2, a0, a2
+.Lzero_loop:
+	CBO_zero(a0)
+	add	a0, a0, a1
+	CBO_zero(a0)
+	add	a0, a0, a1
+	CBO_zero(a0)
+	add	a0, a0, a1
+	CBO_zero(a0)
+	add	a0, a0, a1
+	bltu	a0, a2, .Lzero_loop
+	ret
+.Lno_zicboz:
+	li	a1, 0
+	tail	__memset
+END(__clear_page)
-- 
2.39.1




More information about the linux-riscv mailing list