[PATCH v6 11/13] riscv/kprobe: Fix instruction simulation of JALR

Chen Guokai chenguokai17 at mails.ucas.ac.cn
Fri Jan 27 05:05:39 PST 2023


From: Liao Chang <liaochang1 at huawei.com>

Set kprobe at 'jalr 1140(ra)' of vfs_write results in the following
crash:

[   32.092235] Unable to handle kernel access to user memory without uaccess routines at virtual address 00aaaaaad77b1170
[   32.093115] Oops [#1]
[   32.093251] Modules linked in:
[   32.093626] CPU: 0 PID: 135 Comm: ftracetest Not tainted 6.2.0-rc2-00013-gb0aa5e5df0cb-dirty #16
[   32.093985] Hardware name: riscv-virtio,qemu (DT)
[   32.094280] epc : ksys_read+0x88/0xd6
[   32.094855]  ra : ksys_read+0xc0/0xd6
[   32.095016] epc : ffffffff801cda80 ra : ffffffff801cdab8 sp : ff20000000d7bdc0
[   32.095227]  gp : ffffffff80f14000 tp : ff60000080f9cb40 t0 : ffffffff80f13e80
[   32.095500]  t1 : ffffffff8000c29c t2 : ffffffff800dbc54 s0 : ff20000000d7be60
[   32.095716]  s1 : 0000000000000000 a0 : ffffffff805a64ae a1 : ffffffff80a83708
[   32.095921]  a2 : ffffffff80f160a0 a3 : 0000000000000000 a4 : f229b0afdb165300
[   32.096171]  a5 : f229b0afdb165300 a6 : ffffffff80eeebd0 a7 : 00000000000003ff
[   32.096411]  s2 : ff6000007ff76800 s3 : fffffffffffffff7 s4 : 00aaaaaad77b1170
[   32.096638]  s5 : ffffffff80f160a0 s6 : ff6000007ff76800 s7 : 0000000000000030
[   32.096865]  s8 : 00ffffffc3d97be0 s9 : 0000000000000007 s10: 00aaaaaad77c9410
[   32.097092]  s11: 0000000000000000 t3 : ffffffff80f13e48 t4 : ffffffff8000c29c
[   32.097317]  t5 : ffffffff8000c29c t6 : ffffffff800dbc54
[   32.097505] status: 0000000200000120 badaddr: 00aaaaaad77b1170 cause: 000000000000000d
[   32.098011] [<ffffffff801cdb72>] ksys_write+0x6c/0xd6
[   32.098222] [<ffffffff801cdc06>] sys_write+0x2a/0x38
[   32.098405] [<ffffffff80003c76>] ret_from_syscall+0x0/0x2

Since the rs1 and rd might be the same one, such as 'jalr 1140(ra)',
hence it requires obtaining the target address from rs1 followed by
updating rd.

Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
Signed-off-by: Liao Chang <liaochang1 at huawei.com>
---
 arch/riscv/kernel/probes/simulate-insn.c | 6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

diff --git a/arch/riscv/kernel/probes/simulate-insn.c b/arch/riscv/kernel/probes/simulate-insn.c
index 7441ac8a6843..8402020010d5 100644
--- a/arch/riscv/kernel/probes/simulate-insn.c
+++ b/arch/riscv/kernel/probes/simulate-insn.c
@@ -75,13 +75,9 @@ bool __kprobes simulate_jalr(u32 opcode, unsigned long addr, struct pt_regs *reg
 	if (!ret)
 		return ret;
 
-	ret = rv_insn_reg_set_val(regs, rd_index, addr + 4);
-	if (!ret)
-		return ret;
-
 	instruction_pointer_set(regs, (base_addr + sign_extend32((imm), 11))&~1);
 
-	return ret;
+	return rv_insn_reg_set_val(regs, rd_index, addr + 4);
 }
 
 #define auipc_rd_idx(opcode) \
-- 
2.34.1




More information about the linux-riscv mailing list