[PATCH v2 10/11] riscv: dts: starfive: jh7110: Add DVP and HDMI TX pixel external clocks

[Xingyu Wu]

On 2023/2/28 3:55, Conor Dooley wrote:
> On Tue, Feb 21, 2023 at 04:33:22PM +0800, Xingyu Wu wrote:
>> Add DVP and HDMI TX pixel external fixed clocks and the rates are
>> 74.25MHz and 297MHz.
>> 
>> Signed-off-by: Xingyu Wu <xingyu.wu at starfivetech.com>
>> ---
>>  .../dts/starfive/jh7110-starfive-visionfive-2.dtsi   |  8 ++++++++
>>  arch/riscv/boot/dts/starfive/jh7110.dtsi             | 12 ++++++++++++
>>  2 files changed, 20 insertions(+)
>> 
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> index c2aa8946a0f1..27af817a55aa 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> @@ -86,6 +86,14 @@ &mclk_ext {
>>  	clock-frequency = <12288000>;
>>  };
>>  
>> +&dvp_clk {
>> +	clock-frequency = <74250000>;
>> +};
>> +
>> +&hdmitx0_pixelclk {
>> +	clock-frequency = <297000000>;
>> +};
>> +
>>  &uart0 {
>>  	pinctrl-names = "default";
>>  	pinctrl-0 = <&uart0_pins>;
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
>> index 005ead2624d4..a5e6fb3ad188 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
>> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
>> @@ -245,6 +245,18 @@ mclk_ext: mclk-ext-clock {
>>  		#clock-cells = <0>;
>>  	};
>>  
>> +	dvp_clk: dvp-clk-clock {
>> +		compatible = "fixed-clock";
>> +		clock-output-names = "dvp_clk";
>> +		#clock-cells = <0>;
>> +	};
>> +
>> +	hdmitx0_pixelclk: hdmitx0-pixelclk-clock {
>> +		compatible = "fixed-clock";
>> +		clock-output-names = "hdmitx0_pixelclk";
>> +		#clock-cells = <0>;
>> +	};
>> +
> 
> Hmm, would you mind adding these entries with no unit addresses in
> alphanumerical order? Both in the soc & board dtsi files.
> 

Oh, It was my negligence. I will adjust it. Thanks.

Best regards,
Xingyu Wu