[PATCH v4 19/19] riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree

[Conor Dooley]

On Mon, Feb 27, 2023 at 06:12:40PM +0000, Conor Dooley wrote:
> On Thu, Feb 23, 2023 at 04:50:20PM +0800, Hal Feng wrote:
> > On Tue, 21 Feb 2023 16:03:08 +0100, Emil Renner Berthing wrote:
> > > On Tue, 21 Feb 2023 at 03:47, Hal Feng <hal.feng at starfivetech.com> wrote:
> > >> From: Emil Renner Berthing <kernel at esmil.dk>
> > >>
> > >> Add a minimal device tree for StarFive JH7110 VisionFive 2 board
> > >> which has version A and version B. Support booting and basic
> > >> clock/reset/pinctrl/uart drivers.
> > >>
> > >> Acked-by: Conor Dooley <conor.dooley at microchip.com>
> > >> Signed-off-by: Emil Renner Berthing <kernel at esmil.dk>
> > >> Co-developed-by: Jianlong Huang <jianlong.huang at starfivetech.com>
> > >> Signed-off-by: Jianlong Huang <jianlong.huang at starfivetech.com>
> > >> Co-developed-by: Hal Feng <hal.feng at starfivetech.com>
> > >> Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
> > >> ---
> > >>  arch/riscv/boot/dts/starfive/Makefile         |   6 +-
> > >>  .../jh7110-starfive-visionfive-2-v1.2a.dts    |  13 ++
> > >>  .../jh7110-starfive-visionfive-2-v1.3b.dts    |  13 ++
> > >>  .../jh7110-starfive-visionfive-2.dtsi         | 215 ++++++++++++++++++
> > >>  4 files changed, 246 insertions(+), 1 deletion(-)
> > >>  create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.2a.dts
> > >>  create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dts
> > >>  create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> > >>
> > >> diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
> > >> index 039c143cba33..cd73519b907b 100644
> > >> --- a/arch/riscv/boot/dts/starfive/Makefile
> > >> +++ b/arch/riscv/boot/dts/starfive/Makefile
> > >> @@ -1,2 +1,6 @@
> > >>  # SPDX-License-Identifier: GPL-2.0
> > >> -dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb jh7100-starfive-visionfive-v1.dtb
> > >> +dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb
> > >> +dtb-$(CONFIG_SOC_STARFIVE) += jh7100-starfive-visionfive-v1.dtb
> > >> +
> > >> +dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
> > >> +dtb-$(CONFIG_SOC_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
> 
> If you could rebase on top of v6.3-rc1 for the next version & use ARCH_
> not SOC_ here that'd be great.
> 
> > >> +/ {
> > >> +       aliases {
> > >> +               serial0 = &uart0;
> > >> +               i2c0 = &i2c0;
> > >> +               i2c2 = &i2c2;
> > >> +               i2c5 = &i2c5;
> > >> +               i2c6 = &i2c6;
> > > 
> > > Let's keep these sorted alphabetically.
> > 
> > OK, will fix it.
> > 
> 
> > > It would be great to have some sort of order to this file so it's
> > > obvious where to add new nodes. I suggest we do
> > > - root node
> > > - external clocks
> > > - other node references in alphabetical order
> > > 
> > > You're almost there with this patch except the uart0 node is out of place.
> > 
> > Will fix accordingly. Thanks for your suggestions.
> 
> With Emil's suggestions implemented:
> Reviewed-by: Conor Dooley <conor.dooley at microchip.com>

Actually, there's one thing that I don't think was (explicitly?) mentioned,
could you sort the external clocks alphanumerically too?

Cheers,
Conor.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20230227/6ffacf57/attachment.sig>