[PATCH mm-unstable v1 11/26] microblaze/mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE
Geert Uytterhoeven
geert at linux-m68k.org
Mon Feb 27 06:43:07 PST 2023
Hi David,
On Mon, Feb 27, 2023 at 2:31 PM David Hildenbrand <david at redhat.com> wrote:
> On 26.02.23 21:13, Geert Uytterhoeven wrote:
> > On Fri, Jan 13, 2023 at 6:16 PM David Hildenbrand <david at redhat.com> wrote:
> >> Let's support __HAVE_ARCH_PTE_SWP_EXCLUSIVE by stealing one bit
> >> from the type. Generic MM currently only uses 5 bits for the type
> >> (MAX_SWAPFILES_SHIFT), so the stolen bit is effectively unused.
> >>
> >> The shift by 2 when converting between PTE and arch-specific swap entry
> >> makes the swap PTE layout a little bit harder to decipher.
> >>
> >> While at it, drop the comment from paulus---copy-and-paste leftover
> >> from powerpc where we actually have _PAGE_HASHPTE---and mask the type in
> >> __swp_entry_to_pte() as well.
> >>
> >> Cc: Michal Simek <monstr at monstr.eu>
> >> Signed-off-by: David Hildenbrand <david at redhat.com>
> >
> > Thanks for your patch, which is now commit b5c88f21531c3457
> > ("microblaze/mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE") in
> >
>
> Right, it went upstream, so we can only fixup.
>
> >> arch/m68k/include/asm/mcf_pgtable.h | 4 +--
> >
> > What is this m68k change doing here?
> > Sorry for not noticing this earlier.
>
> Thanks for the late review, still valuable :)
>
> That hunk should have gone into the previous patch, looks like I messed
> that up when reworking.
>
> >
> > Furthermore, several things below look strange to me...
> >
> >> arch/microblaze/include/asm/pgtable.h | 45 +++++++++++++++++++++------
> >> 2 files changed, 37 insertions(+), 12 deletions(-)
> >>
> >> diff --git a/arch/m68k/include/asm/mcf_pgtable.h b/arch/m68k/include/asm/mcf_pgtable.h
> >> index 3f8f4d0e66dd..e573d7b649f7 100644
> >> --- a/arch/m68k/include/asm/mcf_pgtable.h
> >> +++ b/arch/m68k/include/asm/mcf_pgtable.h
> >> @@ -46,8 +46,8 @@
> >> #define _CACHEMASK040 (~0x060)
> >> #define _PAGE_GLOBAL040 0x400 /* 68040 global bit, used for kva descs */
> >>
> >> -/* We borrow bit 7 to store the exclusive marker in swap PTEs. */
> >> -#define _PAGE_SWP_EXCLUSIVE 0x080
> >> +/* We borrow bit 24 to store the exclusive marker in swap PTEs. */
> >> +#define _PAGE_SWP_EXCLUSIVE CF_PAGE_NOCACHE
> >
> > CF_PAGE_NOCACHE is 0x80, so this is still bit 7, thus the new comment
> > is wrong?
>
> You're right, it's still bit 7 (and we use LSB-0 bit numbering in that
> file). I'll send a fixup.
OK.
> >> /*
> >> * Externally used page protection values.
> >> diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
> >> index 42f5988e998b..7e3de54bf426 100644
> >> --- a/arch/microblaze/include/asm/pgtable.h
> >> +++ b/arch/microblaze/include/asm/pgtable.h
> >> @@ -131,10 +131,10 @@ extern pte_t *va_to_pte(unsigned long address);
> >> * of the 16 available. Bit 24-26 of the TLB are cleared in the TLB
> >> * miss handler. Bit 27 is PAGE_USER, thus selecting the correct
> >> * zone.
> >> - * - PRESENT *must* be in the bottom two bits because swap cache
> >> - * entries use the top 30 bits. Because 4xx doesn't support SMP
> >> - * anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30
> >> - * is cleared in the TLB miss handler before the TLB entry is loaded.
> >> + * - PRESENT *must* be in the bottom two bits because swap PTEs use the top
> >> + * 30 bits. Because 4xx doesn't support SMP anyway, M is irrelevant so we
> >> + * borrow it for PAGE_PRESENT. Bit 30 is cleared in the TLB miss handler
> >> + * before the TLB entry is loaded.
> >
> > So the PowerPC 4xx comment is still here?
>
> I only dropped the comment above __swp_type(). I guess you mean that we
> could also drop the "Because 4xx doesn't support SMP anyway, M is
> irrelevant so we borrow it for PAGE_PRESENT." sentence, correct? Not
Yes, that's what I meant.
> sure about the "Bit 30 is cleared in the TLB miss handler" comment, if
> that can similarly be dropped.
No idea, didn't check. But if it was copied from PPC, chances are
high it's no longer true....
> >> * - All other bits of the PTE are loaded into TLBLO without
> >> * * modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
> >> * software PTE bits. We actually use bits 21, 24, 25, and
> >> @@ -155,6 +155,9 @@ extern pte_t *va_to_pte(unsigned long address);
> >> #define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
> >> #define _PMD_PRESENT PAGE_MASK
> >>
> >> +/* We borrow bit 24 to store the exclusive marker in swap PTEs. */
> >> +#define _PAGE_SWP_EXCLUSIVE _PAGE_DIRTY
> >
> > _PAGE_DIRTY is 0x80, so this is also bit 7, thus the new comment is
> > wrong?
>
> In the example, I use MSB-0 bit numbering (which I determined to be
> correct in microblaze context eventually, but I got confused a couple a
> times because it's very inconsistent). That should be MSB-0 bit 24.
Thanks, TIL microblaze uses IBM bit numbering...
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
More information about the linux-riscv
mailing list