[PATCH v5 6/8] RISC-V: Use Zicboz in clear_page when available

Andrew Jones ajones at ventanamicro.com
Fri Feb 24 06:25:30 PST 2023


On Fri, Feb 24, 2023 at 02:00:44PM +0000, Ben Dooks wrote:
> On 21/02/2023 19:09, Andrew Jones wrote:
> > Using memset() to zero a 4K page takes 563 total instructions, where
> > 20 are branches. clear_page(), with Zicboz and a 64 byte block size,
> > takes 169 total instructions, where 4 are branches and 33 are nops.
> > Even though the block size is a variable, thanks to alternatives, we
> > can still implement a Duff device without having to do any preliminary
> > calculations. This is achieved by using the alternatives' cpufeature
> > value (the upper 16 bits of patch_id). The value used is the maximum
> > zicboz block size order accepted at the patch site. This enables us
> > to stop patching / unrolling when 4K bytes have been zeroed (we would
> > loop and continue after 4K if the page size would be larger)
> > 
> > For 4K pages, unrolling 16 times allows block sizes of 64 and 128 to
> > only loop a few times and larger block sizes to not loop at all. Since
> > cbo.zero doesn't take an offset, we also need an 'add' after each
> > instruction, making the loop body 112 to 160 bytes. Hopefully this
> > is small enough to not cause icache misses.
> > 
> > Signed-off-by: Andrew Jones <ajones at ventanamicro.com>
> > Acked-by: Conor Dooley <conor.dooley at microchip.com>
> > ---
> >   arch/riscv/Kconfig                | 13 ++++++
> >   arch/riscv/include/asm/insn-def.h |  4 ++
> >   arch/riscv/include/asm/page.h     |  6 ++-
> >   arch/riscv/kernel/cpufeature.c    | 11 +++++
> >   arch/riscv/lib/Makefile           |  1 +
> >   arch/riscv/lib/clear_page.S       | 73 +++++++++++++++++++++++++++++++
> >   6 files changed, 107 insertions(+), 1 deletion(-)
> >   create mode 100644 arch/riscv/lib/clear_page.S
> 
> [snip]
> 
> > diff --git a/arch/riscv/kernel/cpufeature.c b/arch/riscv/kernel/cpufeature.c
> > index 0594989ead63..4a496552b812 100644
> > --- a/arch/riscv/kernel/cpufeature.c
> > +++ b/arch/riscv/kernel/cpufeature.c
> > @@ -292,6 +292,17 @@ static bool riscv_cpufeature_patch_check(u16 id, u16 value)
> >   	if (!value)
> >   		return true;
> > +	switch (id) {
> > +	case RISCV_ISA_EXT_ZICBOZ:
> > +		/*
> > +		 * Zicboz alternative applications provide the maximum
> > +		 * supported block size order, or zero when it doesn't
> > +		 * matter. If the current block size exceeds the maximum,
> > +		 * then the alternative cannot be applied.
> > +		 */
> > +		return riscv_cboz_block_size <= (1U << value);
> > +	}
> > +
> >   	return false;
> >   }
> > diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
> > index 6c74b0bedd60..26cb2502ecf8 100644
> > --- a/arch/riscv/lib/Makefile
> > +++ b/arch/riscv/lib/Makefile
> > @@ -8,5 +8,6 @@ lib-y			+= strlen.o
> >   lib-y			+= strncmp.o
> >   lib-$(CONFIG_MMU)	+= uaccess.o
> >   lib-$(CONFIG_64BIT)	+= tishift.o
> > +lib-$(CONFIG_RISCV_ISA_ZICBOZ)	+= clear_page.o
> >   obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
> > diff --git a/arch/riscv/lib/clear_page.S b/arch/riscv/lib/clear_page.S
> > new file mode 100644
> > index 000000000000..7c7fa45b5ab5
> > --- /dev/null
> > +++ b/arch/riscv/lib/clear_page.S
> > @@ -0,0 +1,73 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (c) 2023 Ventana Micro Systems Inc.
> > + */
> > +
> > +#include <linux/linkage.h>
> > +#include <asm/asm.h>
> > +#include <asm/alternative-macros.h>
> > +#include <asm/hwcap.h>
> > +#include <asm/insn-def.h>
> > +#include <asm/page.h>
> > +
> > +#define CBOZ_ALT(order, old, new)				\
> > +	ALTERNATIVE(old, new, 0,				\
> > +		    ((order) << 16) | RISCV_ISA_EXT_ZICBOZ,	\
> > +		    CONFIG_RISCV_ISA_ZICBOZ)
> > +
> > +/* void clear_page(void *page) */
> > +ENTRY(__clear_page)
> > +WEAK(clear_page)
> 
> out of interest, why the __clear_page() entry and the
> WEAK(clear_page)?

I was inspired by memset, but, in hindsight, it doesn't make sense for
clear_page to be weak.

> 
> Just followed up with a patch to fix the modpost.

Thanks!

> 
> So far this seems to be working with qemu and a backport to 5.19.x

Great news!

Thanks,
drew



More information about the linux-riscv mailing list