[PATCH V2 04/21] RISC-V: Add support to build the ACPI core
Sunil V L
sunilvl at ventanamicro.com
Fri Feb 24 01:00:58 PST 2023
On Mon, Feb 20, 2023 at 04:44:15PM +0100, Andrew Jones wrote:
> On Thu, Feb 16, 2023 at 11:50:26PM +0530, Sunil V L wrote:
> > Enable ACPI core for RISC-V after adding architecture-specific
> > interfaces and header files required to build the ACPI core.
> >
> > 1) Couple of header files are required unconditionally by the ACPI
> > core. Add empty acenv.h and cpu.h header files.
> >
> > 2) If CONFIG_PCI is enabled, a few PCI related interfaces need to
> > be provided by the architecture. Define dummy interfaces for now
> > so that build succeeds. Actual implementation will be added when
> > PCI support is added for ACPI along with external interrupt
> > controller support.
> >
> > 3) A few globals and memory mapping related functions specific
> > to the architecture need to be provided.
> >
> > Signed-off-by: Sunil V L <sunilvl at ventanamicro.com>
> > Acked-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
> > ---
> > arch/riscv/Kconfig | 5 +++
> > arch/riscv/include/asm/acenv.h | 11 +++++
> > arch/riscv/include/asm/acpi.h | 60 +++++++++++++++++++++++++
> > arch/riscv/include/asm/cpu.h | 8 ++++
> > arch/riscv/kernel/Makefile | 2 +
> > arch/riscv/kernel/acpi.c | 80 ++++++++++++++++++++++++++++++++++
> > 6 files changed, 166 insertions(+)
> > create mode 100644 arch/riscv/include/asm/acenv.h
> > create mode 100644 arch/riscv/include/asm/acpi.h
> > create mode 100644 arch/riscv/include/asm/cpu.h
> > create mode 100644 arch/riscv/kernel/acpi.c
> >
> > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > index d153e1cd890b..3ba701b26389 100644
> > --- a/arch/riscv/Kconfig
> > +++ b/arch/riscv/Kconfig
> > @@ -12,6 +12,8 @@ config 32BIT
> >
> > config RISCV
> > def_bool y
> > + select ACPI_GENERIC_GSI if ACPI
>
> Is it better for this to come after patch 14, "irqchip/riscv-intc:
> Add ACPI support"?
>
This is required to just to enable building the ACPI core for RISC-V.
> > + select ACPI_REDUCED_HARDWARE_ONLY if ACPI
> > select ARCH_CLOCKSOURCE_INIT
> > select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
> > select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
> > @@ -598,6 +600,7 @@ config EFI_STUB
> > config EFI
> > bool "UEFI runtime support"
> > depends on OF && !XIP_KERNEL
> > + select ARCH_SUPPORTS_ACPI if 64BIT
> > select LIBFDT
> > select UCS2_STRING
> > select EFI_PARAMS_FROM_FDT
> > @@ -703,3 +706,5 @@ source "drivers/cpufreq/Kconfig"
> > endmenu # "CPU Power Management"
> >
> > source "arch/riscv/kvm/Kconfig"
> > +
> > +source "drivers/acpi/Kconfig"
> > diff --git a/arch/riscv/include/asm/acenv.h b/arch/riscv/include/asm/acenv.h
> > new file mode 100644
> > index 000000000000..22123c5a4883
> > --- /dev/null
> > +++ b/arch/riscv/include/asm/acenv.h
> > @@ -0,0 +1,11 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * RISC-V specific ACPICA environments and implementation
> > + */
> > +
> > +#ifndef _ASM_ACENV_H
> > +#define _ASM_ACENV_H
> > +
> > +/* It is required unconditionally by ACPI core */
> > +
> > +#endif /* _ASM_ACENV_H */
> > diff --git a/arch/riscv/include/asm/acpi.h b/arch/riscv/include/asm/acpi.h
> > new file mode 100644
> > index 000000000000..7f9dce3c39d0
> > --- /dev/null
> > +++ b/arch/riscv/include/asm/acpi.h
> > @@ -0,0 +1,60 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (C) 2013-2014, Linaro Ltd.
> > + * Author: Al Stone <al.stone at linaro.org>
> > + * Author: Graeme Gregory <graeme.gregory at linaro.org>
> > + * Author: Hanjun Guo <hanjun.guo at linaro.org>
> > + *
> > + * Copyright (C) 2021-2023, Ventana Micro Systems Inc.
> > + * Author: Sunil V L <sunilvl at ventanamicro.com>
> > + */
> > +
> > +#ifndef _ASM_ACPI_H
> > +#define _ASM_ACPI_H
> > +
> > +/* Basic configuration for ACPI */
> > +#ifdef CONFIG_ACPI
> > +
> > +/* ACPI table mapping after acpi_permanent_mmap is set */
> > +void *acpi_os_ioremap(acpi_physical_address phys, acpi_size size);
> > +#define acpi_os_ioremap acpi_os_ioremap
> > +
> > +#define acpi_strict 1 /* No out-of-spec workarounds on RISC-V */
> > +extern int acpi_disabled;
> > +extern int acpi_noirq;
> > +extern int acpi_pci_disabled;
>
> need blank line here
>
Okay.
> > +static inline void disable_acpi(void)
> > +{
> > + acpi_disabled = 1;
> > + acpi_pci_disabled = 1;
> > + acpi_noirq = 1;
> > +}
> > +
> > +static inline void enable_acpi(void)
> > +{
> > + acpi_disabled = 0;
> > + acpi_pci_disabled = 0;
> > + acpi_noirq = 0;
> > +}
> > +
> > +/*
> > + * The ACPI processor driver for ACPI core code needs this macro
> > + * to find out this cpu was already mapped (mapping from CPU hardware
> > + * ID to CPU logical ID) or not.
> > + */
> > +#define cpu_physical_id(cpu) cpuid_to_hartid_map(cpu)
> > +
> > +/*
> > + * Since MADT must provide at least one RINTC structure, the
> > + * CPU will be always available in MADT on RISC-V.
> > + */
> > +static inline bool acpi_has_cpu_in_madt(void)
> > +{
> > + return true;
> > +}
> > +
> > +static inline void arch_fix_phys_package_id(int num, u32 slot) { }
> > +
> > +#endif /* CONFIG_ACPI */
> > +
> > +#endif /*_ASM_ACPI_H*/
> > diff --git a/arch/riscv/include/asm/cpu.h b/arch/riscv/include/asm/cpu.h
> > new file mode 100644
> > index 000000000000..ea1a88b3d5f2
> > --- /dev/null
> > +++ b/arch/riscv/include/asm/cpu.h
> > @@ -0,0 +1,8 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +
> > +#ifndef _ASM_CPU_H
> > +#define _ASM_CPU_H
> > +
> > +/* It is required unconditionally by ACPI core */
> > +
> > +#endif /* _ASM_CPU_H */
> > diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
> > index 67f542be1bea..f979dc8cf47d 100644
> > --- a/arch/riscv/kernel/Makefile
> > +++ b/arch/riscv/kernel/Makefile
> > @@ -90,3 +90,5 @@ obj-$(CONFIG_EFI) += efi.o
> > obj-$(CONFIG_COMPAT) += compat_syscall_table.o
> > obj-$(CONFIG_COMPAT) += compat_signal.o
> > obj-$(CONFIG_COMPAT) += compat_vdso/
> > +
> > +obj-$(CONFIG_ACPI) += acpi.o
> > diff --git a/arch/riscv/kernel/acpi.c b/arch/riscv/kernel/acpi.c
> > new file mode 100644
> > index 000000000000..81d448c41714
> > --- /dev/null
> > +++ b/arch/riscv/kernel/acpi.c
> > @@ -0,0 +1,80 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * RISC-V Specific Low-Level ACPI Boot Support
> > + *
> > + * Copyright (C) 2013-2014, Linaro Ltd.
> > + * Author: Al Stone <al.stone at linaro.org>
> > + * Author: Graeme Gregory <graeme.gregory at linaro.org>
> > + * Author: Hanjun Guo <hanjun.guo at linaro.org>
> > + * Author: Tomasz Nowicki <tomasz.nowicki at linaro.org>
> > + * Author: Naresh Bhat <naresh.bhat at linaro.org>
> > + *
> > + * Copyright (C) 2021-2023, Ventana Micro Systems Inc.
> > + * Author: Sunil V L <sunilvl at ventanamicro.com>
> > + */
> > +
> > +#include <linux/acpi.h>
> > +#include <linux/io.h>
> > +#include <linux/pci.h>
> > +
> > +int acpi_noirq = 1; /* skip ACPI IRQ initialization */
> > +int acpi_disabled = 1;
> > +EXPORT_SYMBOL(acpi_disabled);
> > +
> > +int acpi_pci_disabled = 1; /* skip ACPI PCI scan and IRQ initialization */
> > +EXPORT_SYMBOL(acpi_pci_disabled);
> > +
> > +/*
> > + * __acpi_map_table() will be called before paging_init(), so early_ioremap()
> > + * or early_memremap() should be called here to for ACPI table mapping.
> > + */
> > +void __init __iomem *__acpi_map_table(unsigned long phys, unsigned long size)
> > +{
> > + if (!size)
> > + return NULL;
> > +
> > + return early_memremap(phys, size);
> > +}
> > +
> > +void __init __acpi_unmap_table(void __iomem *map, unsigned long size)
> > +{
> > + if (!map || !size)
> > + return;
> > +
> > + early_memunmap(map, size);
> > +}
> > +
> > +void *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
> > +{
> > + return memremap(phys, size, MEMREMAP_WB);
> > +}
> > +
> > +#ifdef CONFIG_PCI
> > +
> > +/*
> > + * These interfaces are defined just to enable building ACPI core.
> > + * TODO: Update it with actual implementation when external interrupt
> > + * controller support is added in RISC-V ACPI.
> > + */
> > +int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
> > + int reg, int len, u32 *val)
> > +{
> > + return PCIBIOS_DEVICE_NOT_FOUND;
> > +}
> > +
> > +int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
> > + int reg, int len, u32 val)
> > +{
> > + return PCIBIOS_DEVICE_NOT_FOUND;
> > +}
> > +
> > +int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
> > +{
> > + return -1;
> > +}
> > +
> > +struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root)
> > +{
> > + return NULL;
> > +}
> > +#endif /* CONFIG_PCI */
> > --
> > 2.34.1
> >
>
> Otherwise, afaict, this is pretty consistent with how arm64 started its
> ACPI support.
>
> Reviewed-by: Andrew Jones <ajones at ventanamicro.com>
>
Thanks!
Sunil
More information about the linux-riscv
mailing list