[PATCH -next V7 6/7] samples: ftrace: Add riscv support for SAMPLE_FTRACE_DIRECT[_MULTI]
Guo Ren
guoren at kernel.org
Mon Feb 20 20:02:04 PST 2023
On Sun, Feb 19, 2023 at 5:30 AM Palmer Dabbelt <palmer at dabbelt.com> wrote:
>
> On Wed, 18 Jan 2023 22:05:04 PST (-0800), guoren at kernel.org wrote:
> > Thx Evgenii & Song,
> >
> > I got it; it would be put into v8.
>
> Sorry if I missed it, but I don't see a v8 on patchwork. I queued up
> the first three patches onto for-next as they seem like pretty
> independent fixes/cleanups, I'll hold off on the others until v8.
Thx for approving. I would keep the patch series more independent next time.
>
> Thanks!
>
> >
> > On Wed, Jan 18, 2023 at 11:19 PM Evgenii Shatokhin
> > <e.shatokhin at yadro.com> wrote:
> >>
> >> On 18.01.2023 05:37, Song Shuai wrote:
> >> > Evgenii Shatokhin <e.shatokhin at yadro.com> 于2023年1月17日周二 16:22写道：
> >> >>
> >> >> On 17.01.2023 16:16, Evgenii Shatokhin wrote:
> >> >>> Hi, Song,
> >> >>>
> >> >>> On 17.01.2023 12:32, Song Shuai wrote:
> >> >>>>
> >> >>>> Hi, Evgenii:
> >> >>>>
> >> >>>> Evgenii Shatokhin <e.shatokhin at yadro.com> 于2023年1月16日周一 14:30写道：
> >> >>>>
> >> >>>>>
> >> >>>>> Hi,
> >> >>>>>
> >> >>>>> On 12.01.2023 12:06, guoren at kernel.org wrote:
> >> >>>>>> From: Song Shuai <suagrfillet at gmail.com>
> >> >>>>>>
> >> >>>>>> select HAVE_SAMPLE_FTRACE_DIRECT and HAVE_SAMPLE_FTRACE_DIRECT_MULTI
> >> >>>>>> for ARCH_RV64I in arch/riscv/Kconfig. And add riscv asm code for
> >> >>>>>> the ftrace-direct*.c files in samples/ftrace/.
> >> >>>>>>
> >> >>>>>> Signed-off-by: Song Shuai <suagrfillet at gmail.com>
> >> >>>>>> Tested-by: Guo Ren <guoren at kernel.org>
> >> >>>>>> Signed-off-by: Guo Ren <guoren at kernel.org>
> >> >>>>>> ---
> >> >>>>>> arch/riscv/Kconfig | 2 ++
> >> >>>>>> samples/ftrace/ftrace-direct-modify.c | 33 ++++++++++++++++++
> >> >>>>>> samples/ftrace/ftrace-direct-multi-modify.c | 37
> >> >>>>>> +++++++++++++++++++++
> >> >>>>>> samples/ftrace/ftrace-direct-multi.c | 22 ++++++++++++
> >> >>>>>> samples/ftrace/ftrace-direct-too.c | 26 +++++++++++++++
> >> >>>>>> samples/ftrace/ftrace-direct.c | 22 ++++++++++++
> >> >>>>>> 6 files changed, 142 insertions(+)
> >> >>>>>
> >> >>>>> The samples were built OK now, but ftrace-direct-multi and
> >> >>>>> ftrace-direct-multi-modify report incorrect values of ip/pc it seems.
> >> >>>>>
> >> >>>>> I ran 'insmod ftrace-direct-multi.ko', waited a little and then checked
> >> >>>>> the messages in the trace:
> >> >>>>>
> >> >>>>> # TASK-PID CPU# ||||| TIMESTAMP FUNCTION
> >> >>>>> # | | | ||||| | |
> >> >>>>> migration/1-19 [001] ..... 3858.532131: my_direct_func1: my
> >> >>>>> direct func1 ip 0
> >> >>>>> migration/0-15 [000] d.s2. 3858.532136: my_direct_func1: my
> >> >>>>> direct func1 ip ff60000001ba9600
> >> >>>>> migration/0-15 [000] d..2. 3858.532204: my_direct_func1: my
> >> >>>>> direct func1 ip ff60000003334d00
> >> >>>>> migration/0-15 [000] ..... 3858.532232: my_direct_func1: my
> >> >>>>> direct func1 ip 0
> >> >>>>> rcu_sched-14 [001] ..... 3858.532257: my_direct_func1: my
> >> >>>>> direct func1 ip 0
> >> >>>>> insmod-415 [000] ..... 3858.532270: my_direct_func1: my
> >> >>>>> direct func1 ip 7fffffffffffffff
> >> >>>>> <idle>-0 [001] ..s1. 3858.539051: my_direct_func1: my
> >> >>>>> direct func1 ip ff60000001ba9600
> >> >>>>> <idle>-0 [001] dns2. 3858.539124: my_direct_func1: my
> >> >>>>> direct func1 ip ff60000001ba9600
> >> >>>>> rcu_sched-14 [001] ..... 3858.539208: my_direct_func1: my
> >> >>>>> direct func1 ip 0
> >> >>>>> [...]
> >> >>>>>
> >> >>>>> If I understand it right, my_direct_func1() should print the address of
> >> >>>>> some location in the code, probably - at the beginning of the traced
> >> >>>>> functions.
> >> >>>>>
> >> >>>>> The printed values (0x0, 0x7fffffffffffffff, ...) are not valid code
> >> >>>>> addresses.
> >> >>>>>
> >> >>>> The invalid code address is only printed by accessing the schedule()
> >> >>>> function's first argument whose address stores in a0 register.
> >> >>>> While schedule() actually has no parameter declared, so my_direct_func
> >> >>>> just prints the a0 in the context of the schedule()'s caller and
> >> >>>> the address maybe varies depending on the caller.
> >> >>>>
> >> >>>> I can't really understand why tracing the first argument of the
> >> >>>> schedule() function, but it seems nonsense at this point.
> >> >>>
> >> >>> The question is, what should be passed as the argument(s) of
> >> >>> my_direct_func() in this particular sample module. The kernel docs and
> >> >>> commit logs seem to contain no info on that.
> >> >>>
> >> >>> With direct functions, I suppose, the trampoline can pass anything it
> >> >>> wants to my_direct_func(), not just the arguments of the traced function.
> >> >>>
> >> >>> I'd check what these sample modules do on x86 and would try to match
> >> >>> that behaviour on RISC-V.
> >> >>
> >> >> I have checked ftrace-direct-multi.ko and ftrace-direct-multi-modify.ko
> >> >> on 6.2-rc4 built for x86-64 - yes, ip/pc in the traced function should
> >> >> be passed to my_direct_func().
> >> >>
> >> >> ftrace-direct-multi.ko:
> >> >> # TASK-PID CPU# ||||| TIMESTAMP FUNCTION
> >> >> # | | | ||||| | |
> >> >> insmod-10829 [000] d.h1. 1719.518535: my_direct_func: ip
> >> >> ffffffff87332f45 // wake_up_process+0x5
> >> >> rcu_tasks_kthre-11 [000] ..... 1719.518696: my_direct_func: ip
> >> >> ffffffff8828d935 // schedule+0x5
> >> >> insmod-10829 [000] ..... 1719.518708: my_direct_func: ip
> >> >> ffffffff8828d935
> >> >> systemd-journal-293 [001] ..... 1719.518823: my_direct_func: ip
> >> >> ffffffff8828d935
> >> >> systemd-1 [000] ..... 1719.519141: my_direct_func: ip
> >> >> ffffffff8828d935
> >> >> <idle>-0 [001] ..s1. 1719.521889: my_direct_func: ip
> >> >> ffffffff87332f45
> >> >> <idle>-0 [000] d.s2. 1719.521901: my_direct_func: ip
> >> >> ffffffff87332f45
> >> >> rcu_preempt-15 [001] ..... 1719.521917: my_direct_func: ip
> >> >> ffffffff8828d935
> >> >> [...]
> >> >>
> >> >> The ip values are wake_up_process+0x5 and schedule+0x5, the locations
> >> >> where the execution of the traced functions resumes after the Ftrace
> >> >> trampoline has finished.
> >> >>
> >> >> The results with ftrace-direct-multi-modify.ko are similar to that.
> >> >>
> >> >> The samples look like a demonstration, that one can pass anything
> >> >> necessary to the handler in case of "direct" functions.
> >> >>
> >> >> I suppose, the RISC-V-specific asm code in these two sample modules
> >> >> could be updated to pass the saved pc value to my_direct_func() in a0.
> >> >
> >> > Yes, you're right.
> >> >
> >> > I added 'mv a0,t0' in front of `call my_direct_func` to pass the address of
> >> > traced function with mcount offset.
> >> >
> >> > Here is the updated patch for your reference.
> >> > https://github.com/sugarfillet/linux/commit/95b174fb104dd970b982ee6fa19879393e229318
> >>
> >> Thank you for the quick fix. This one looks good to me.
> >>
> >> ftrace-direct-multi*.ko now report the ip values corresponding to
> >> schedule+0x8 and wake_up_process+0x8, which is what was expected here.
> >>
> >> One more thing: please change my "Co-developed-by:" into "Tested-by:" in
> >> your patch, becase this is what I actually did: tested it and reported
> >> the results. I cannot take your credit for development of this patch ;-)
> >>
> >> Looking forward for v8 of the series.
> >> >
> >> >
> >> >>
> >> >>>
> >> >>>>
> >> >>>> As for this patch, it just impls a simple mcount (direct_caller) to
> >> >>>> trace kernel functions, and basically saves the necessary ABI,
> >> >>>> call the tracing function, and restores the ABI, just like other
> >> >>>> arches do.
> >> >>>> so It shouldn't be blamed.
> >> >>>>
> >> >>>> I started an independent patch to replace schedule with kick_process
> >> >>>> to make these samples more reasonable. And It has no conflict with the
> >> >>>> current patch, so we can go on.
> >> >>>>
> >> >>>> Link:
> >> >>>> https://lore.kernel.org/linux-kernel/20230117091101.3669996-1-suagrfillet@gmail.com/T/#u
> >> >>>>
> >> >>>>> The same issue is with ftrace-direct-multi-modify.ko.
> >> >>>>>
> >> >>>>> Is anything missing here?
> >> >>>>>
> >> >>>>>>
> >> >>>>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> >> >>>>>> index 307a9f413edd..e944af44f681 100644
> >> >>>>>> --- a/arch/riscv/Kconfig
> >> >>>>>> +++ b/arch/riscv/Kconfig
> >> >>>>>> @@ -112,6 +112,8 @@ config RISCV
> >> >>>>>> select HAVE_POSIX_CPU_TIMERS_TASK_WORK
> >> >>>>>> select HAVE_REGS_AND_STACK_ACCESS_API
> >> >>>>>> select HAVE_FUNCTION_ARG_ACCESS_API
> >> >>>>>> + select HAVE_SAMPLE_FTRACE_DIRECT
> >> >>>>>> + select HAVE_SAMPLE_FTRACE_DIRECT_MULTI
> >> >>>>>> select HAVE_STACKPROTECTOR
> >> >>>>>> select HAVE_SYSCALL_TRACEPOINTS
> >> >>>>>> select HAVE_RSEQ
> >> >>>>>> diff --git a/samples/ftrace/ftrace-direct-modify.c
> >> >>>>>> b/samples/ftrace/ftrace-direct-modify.c
> >> >>>>>> index de5a0f67f320..be7bf472c3c7 100644
> >> >>>>>> --- a/samples/ftrace/ftrace-direct-modify.c
> >> >>>>>> +++ b/samples/ftrace/ftrace-direct-modify.c
> >> >>>>>> @@ -23,6 +23,39 @@ extern void my_tramp2(void *);
> >> >>>>>>
> >> >>>>>> static unsigned long my_ip = (unsigned long)schedule;
> >> >>>>>>
> >> >>>>>> +#ifdef CONFIG_RISCV
> >> >>>>>> +
> >> >>>>>> +asm (" .pushsection .text, \"ax\", @progbits\n"
> >> >>>>>> +" .type my_tramp1, @function\n"
> >> >>>>>> +" .globl my_tramp1\n"
> >> >>>>>> +" my_tramp1:\n"
> >> >>>>>> +" addi sp,sp,-16\n"
> >> >>>>>> +" sd t0,0(sp)\n"
> >> >>>>>> +" sd ra,8(sp)\n"
> >> >>>>>> +" call my_direct_func1\n"
> >> >>>>>> +" ld t0,0(sp)\n"
> >> >>>>>> +" ld ra,8(sp)\n"
> >> >>>>>> +" addi sp,sp,16\n"
> >> >>>>>> +" jr t0\n"
> >> >>>>>> +" .size my_tramp1, .-my_tramp1\n"
> >> >>>>>> +
> >> >>>>>> +" .type my_tramp2, @function\n"
> >> >>>>>> +" .globl my_tramp2\n"
> >> >>>>>> +" my_tramp2:\n"
> >> >>>>>> +" addi sp,sp,-16\n"
> >> >>>>>> +" sd t0,0(sp)\n"
> >> >>>>>> +" sd ra,8(sp)\n"
> >> >>>>>> +" call my_direct_func2\n"
> >> >>>>>> +" ld t0,0(sp)\n"
> >> >>>>>> +" ld ra,8(sp)\n"
> >> >>>>>> +" addi sp,sp,16\n"
> >> >>>>>> +" jr t0\n"
> >> >>>>>> +" .size my_tramp2, .-my_tramp2\n"
> >> >>>>>> +" .popsection\n"
> >> >>>>>> +);
> >> >>>>>> +
> >> >>>>>> +#endif /* CONFIG_RISCV */
> >> >>>>>> +
> >> >>>>>> #ifdef CONFIG_X86_64
> >> >>>>>>
> >> >>>>>> #include <asm/ibt.h>
> >> >>>>>> diff --git a/samples/ftrace/ftrace-direct-multi-modify.c
> >> >>>>>> b/samples/ftrace/ftrace-direct-multi-modify.c
> >> >>>>>> index d52370cad0b6..10884bf418f7 100644
> >> >>>>>> --- a/samples/ftrace/ftrace-direct-multi-modify.c
> >> >>>>>> +++ b/samples/ftrace/ftrace-direct-multi-modify.c
> >> >>>>>> @@ -21,6 +21,43 @@ void my_direct_func2(unsigned long ip)
> >> >>>>>> extern void my_tramp1(void *);
> >> >>>>>> extern void my_tramp2(void *);
> >> >>>>>>
> >> >>>>>> +#ifdef CONFIG_RISCV
> >> >>>>>> +
> >> >>>>>> +asm (" .pushsection .text, \"ax\", @progbits\n"
> >> >>>>>> +" .type my_tramp1, @function\n"
> >> >>>>>> +" .globl my_tramp1\n"
> >> >>>>>> +" my_tramp1:\n"
> >> >>>>>> +" addi sp,sp,-24\n"
> >> >>>>>> +" sd a0,0(sp)\n"
> >> >>>>>> +" sd t0,8(sp)\n"
> >> >>>>>> +" sd ra,16(sp)\n"
> >> >>>>>> +" call my_direct_func1\n"
> >> >>>>>> +" ld a0,0(sp)\n"
> >> >>>>>> +" ld t0,8(sp)\n"
> >> >>>>>> +" ld ra,16(sp)\n"
> >> >>>>>> +" addi sp,sp,24\n"
> >> >>>>>> +" jr t0\n"
> >> >>>>>> +" .size my_tramp1, .-my_tramp1\n"
> >> >>>>>> +
> >> >>>>>> +" .type my_tramp2, @function\n"
> >> >>>>>> +" .globl my_tramp2\n"
> >> >>>>>> +" my_tramp2:\n"
> >> >>>>>> +" addi sp,sp,-24\n"
> >> >>>>>> +" sd a0,0(sp)\n"
> >> >>>>>> +" sd t0,8(sp)\n"
> >> >>>>>> +" sd ra,16(sp)\n"
> >> >>>>>> +" call my_direct_func2\n"
> >> >>>>>> +" ld a0,0(sp)\n"
> >> >>>>>> +" ld t0,8(sp)\n"
> >> >>>>>> +" ld ra,16(sp)\n"
> >> >>>>>> +" addi sp,sp,24\n"
> >> >>>>>> +" jr t0\n"
> >> >>>>>> +" .size my_tramp2, .-my_tramp2\n"
> >> >>>>>> +" .popsection\n"
> >> >>>>>> +);
> >> >>>>>> +
> >> >>>>>> +#endif /* CONFIG_RISCV */
> >> >>>>>> +
> >> >>>>>> #ifdef CONFIG_X86_64
> >> >>>>>>
> >> >>>>>> #include <asm/ibt.h>
> >> >>>>>> diff --git a/samples/ftrace/ftrace-direct-multi.c
> >> >>>>>> b/samples/ftrace/ftrace-direct-multi.c
> >> >>>>>> index ec1088922517..a35bf43bf6d7 100644
> >> >>>>>> --- a/samples/ftrace/ftrace-direct-multi.c
> >> >>>>>> +++ b/samples/ftrace/ftrace-direct-multi.c
> >> >>>>>> @@ -16,6 +16,28 @@ void my_direct_func(unsigned long ip)
> >> >>>>>>
> >> >>>>>> extern void my_tramp(void *);
> >> >>>>>>
> >> >>>>>> +#ifdef CONFIG_RISCV
> >> >>>>>> +
> >> >>>>>> +asm (" .pushsection .text, \"ax\", @progbits\n"
> >> >>>>>> +" .type my_tramp, @function\n"
> >> >>>>>> +" .globl my_tramp\n"
> >> >>>>>> +" my_tramp:\n"
> >> >>>>>> +" addi sp,sp,-24\n"
> >> >>>>>> +" sd a0,0(sp)\n"
> >> >>>>>> +" sd t0,8(sp)\n"
> >> >>>>>> +" sd ra,16(sp)\n"
> >> >>>>>> +" call my_direct_func\n"
> >> >>>>>> +" ld a0,0(sp)\n"
> >> >>>>>> +" ld t0,8(sp)\n"
> >> >>>>>> +" ld ra,16(sp)\n"
> >> >>>>>> +" addi sp,sp,24\n"
> >> >>>>>> +" jr t0\n"
> >> >>>>>> +" .size my_tramp, .-my_tramp\n"
> >> >>>>>> +" .popsection\n"
> >> >>>>>> +);
> >> >>>>>> +
> >> >>>>>> +#endif /* CONFIG_RISCV */
> >> >>>>>> +
> >> >>>>>> #ifdef CONFIG_X86_64
> >> >>>>>>
> >> >>>>>> #include <asm/ibt.h>
> >> >>>>>> diff --git a/samples/ftrace/ftrace-direct-too.c
> >> >>>>>> b/samples/ftrace/ftrace-direct-too.c
> >> >>>>>> index e13fb59a2b47..3b62e33c2e6d 100644
> >> >>>>>> --- a/samples/ftrace/ftrace-direct-too.c
> >> >>>>>> +++ b/samples/ftrace/ftrace-direct-too.c
> >> >>>>>> @@ -18,6 +18,32 @@ void my_direct_func(struct vm_area_struct *vma,
> >> >>>>>>
> >> >>>>>> extern void my_tramp(void *);
> >> >>>>>>
> >> >>>>>> +#ifdef CONFIG_RISCV
> >> >>>>>> +
> >> >>>>>> +asm (" .pushsection .text, \"ax\", @progbits\n"
> >> >>>>>> +" .type my_tramp, @function\n"
> >> >>>>>> +" .globl my_tramp\n"
> >> >>>>>> +" my_tramp:\n"
> >> >>>>>> +" addi sp,sp,-40\n"
> >> >>>>>> +" sd a0,0(sp)\n"
> >> >>>>>> +" sd a1,8(sp)\n"
> >> >>>>>> +" sd a2,16(sp)\n"
> >> >>>>>> +" sd t0,24(sp)\n"
> >> >>>>>> +" sd ra,32(sp)\n"
> >> >>>>>> +" call my_direct_func\n"
> >> >>>>>> +" ld a0,0(sp)\n"
> >> >>>>>> +" ld a1,8(sp)\n"
> >> >>>>>> +" ld a2,16(sp)\n"
> >> >>>>>> +" ld t0,24(sp)\n"
> >> >>>>>> +" ld ra,32(sp)\n"
> >> >>>>>> +" addi sp,sp,40\n"
> >> >>>>>> +" jr t0\n"
> >> >>>>>> +" .size my_tramp, .-my_tramp\n"
> >> >>>>>> +" .popsection\n"
> >> >>>>>> +);
> >> >>>>>> +
> >> >>>>>> +#endif /* CONFIG_RISCV */
> >> >>>>>> +
> >> >>>>>> #ifdef CONFIG_X86_64
> >> >>>>>>
> >> >>>>>> #include <asm/ibt.h>
> >> >>>>>> diff --git a/samples/ftrace/ftrace-direct.c
> >> >>>>>> b/samples/ftrace/ftrace-direct.c
> >> >>>>>> index 1f769d0db20f..2cfe5a7d2d70 100644
> >> >>>>>> --- a/samples/ftrace/ftrace-direct.c
> >> >>>>>> +++ b/samples/ftrace/ftrace-direct.c
> >> >>>>>> @@ -15,6 +15,28 @@ void my_direct_func(struct task_struct *p)
> >> >>>>>>
> >> >>>>>> extern void my_tramp(void *);
> >> >>>>>>
> >> >>>>>> +#ifdef CONFIG_RISCV
> >> >>>>>> +
> >> >>>>>> +asm (" .pushsection .text, \"ax\", @progbits\n"
> >> >>>>>> +" .type my_tramp, @function\n"
> >> >>>>>> +" .globl my_tramp\n"
> >> >>>>>> +" my_tramp:\n"
> >> >>>>>> +" addi sp,sp,-24\n"
> >> >>>>>> +" sd a0,0(sp)\n"
> >> >>>>>> +" sd t0,8(sp)\n"
> >> >>>>>> +" sd ra,16(sp)\n"
> >> >>>>>> +" call my_direct_func\n"
> >> >>>>>> +" ld a0,0(sp)\n"
> >> >>>>>> +" ld t0,8(sp)\n"
> >> >>>>>> +" ld ra,16(sp)\n"
> >> >>>>>> +" addi sp,sp,24\n"
> >> >>>>>> +" jr t0\n"
> >> >>>>>> +" .size my_tramp, .-my_tramp\n"
> >> >>>>>> +" .popsection\n"
> >> >>>>>> +);
> >> >>>>>> +
> >> >>>>>> +#endif /* CONFIG_RISCV */
> >> >>>>>> +
> >> >>>>>> #ifdef CONFIG_X86_64
> >> >>>>>>
> >> >>>>>> #include <asm/ibt.h>
> >> >>>>>> --
> >> >>>>>> 2.36.1
> >> >>>>
> >> >>>> --
> >> >>>> Thanks,
> >> >>>> Song
> >> >>>>
> >> >>>
> >> >>> Regards,
> >> >>> Evgenii
> >> >>
> >> >>
> >> >
> >> >
> >> > --
> >> > Thanks,
> >> > Song
> >> >
> >>
> >>
> >
> >
> > --
> > Best Regards
> > Guo Ren
--
Best Regards
Guo Ren
More information about the linux-riscv
mailing list