[PATCH v1 5/6] fpga: add PolarFire SoC Auto Update support
Conor Dooley
conor at kernel.org
Fri Feb 17 08:40:22 PST 2023
From: Conor Dooley <conor.dooley at microchip.com>
Add support for Auto Update reprogramming of the FPGA fabric on
PolarFire SoC.
Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
drivers/fpga/Kconfig | 9 +
drivers/fpga/Makefile | 1 +
drivers/fpga/microchip-auto-update.c | 495 +++++++++++++++++++++++++++
3 files changed, 505 insertions(+)
create mode 100644 drivers/fpga/microchip-auto-update.c
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
index 6ce143dafd04..0cdd6978a440 100644
--- a/drivers/fpga/Kconfig
+++ b/drivers/fpga/Kconfig
@@ -257,6 +257,15 @@ config FPGA_M10_BMC_SEC_UPDATE
(BMC) and provides support for secure updates for the BMC image,
the FPGA image, the Root Entry Hashes, etc.
+config FPGA_MGR_MICROCHIP_AUTO_UPDATE
+ tristate "Microchip PolarFire SoC AUTO UPDATE"
+ depends on POLARFIRE_SOC_SYS_CTRL
+ help
+ FPGA manager driver support for reprogramming PolarFire SoC from
+ within Linux, using the Auto Upgrade feature of the system controller.
+
+ If built as a module, it will be called microchip-auto-update.
+
config FPGA_MGR_MICROCHIP_SPI
tristate "Microchip Polarfire SPI FPGA manager"
depends on SPI
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
index 72e554b4d2f7..a67903edf976 100644
--- a/drivers/fpga/Makefile
+++ b/drivers/fpga/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o
obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o
obj-$(CONFIG_FPGA_MGR_VERSAL_FPGA) += versal-fpga.o
+obj-$(CONFIG_FPGA_MGR_MICROCHIP_AUTO_UPDATE) += microchip-auto-update.o
obj-$(CONFIG_FPGA_MGR_MICROCHIP_SPI) += microchip-spi.o
obj-$(CONFIG_FPGA_MGR_LATTICE_SYSCONFIG) += lattice-sysconfig.o
obj-$(CONFIG_FPGA_MGR_LATTICE_SYSCONFIG_SPI) += lattice-sysconfig-spi.o
diff --git a/drivers/fpga/microchip-auto-update.c b/drivers/fpga/microchip-auto-update.c
new file mode 100644
index 000000000000..d90085f86b8b
--- /dev/null
+++ b/drivers/fpga/microchip-auto-update.c
@@ -0,0 +1,495 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Microchip Polarfire SoC "Auto Update" FPGA reprogramming.
+ *
+ * Documentation of this functionality is available in the "PolarFire® FPGA and
+ * PolarFire SoC FPGA Programming" User Guide.
+ *
+ * Copyright (c) 2022-2023 Microchip Corporation. All rights reserved.
+ *
+ * Author: Conor Dooley <conor.dooley at microchip.com>
+ */
+#include <linux/debugfs.h>
+#include <linux/fpga/fpga-mgr.h>
+#include <linux/math.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/of_device.h>
+#include <linux/sizes.h>
+
+#include <soc/microchip/mpfs.h>
+
+#define AUTO_UPDATE_DEFAULT_MBOX_OFFSET 0u
+#define AUTO_UPDATE_DEFAULT_RESP_OFFSET 0u
+
+#define AUTO_UPDATE_FEATURE_CMD_OPCODE 0x05u
+#define AUTO_UPDATE_FEATURE_CMD_DATA_SIZE 0u
+#define AUTO_UPDATE_FEATURE_RESP_SIZE 33u
+#define AUTO_UPDATE_FEATURE_CMD_DATA NULL
+#define AUTO_UPDATE_FEATURE_ENABLED BIT(5)
+
+#define AUTO_UPDATE_AUTHENTICATE_CMD_OPCODE 0x22u
+#define AUTO_UPDATE_AUTHENTICATE_CMD_DATA_SIZE 0u
+#define AUTO_UPDATE_AUTHENTICATE_RESP_SIZE 1u
+#define AUTO_UPDATE_AUTHENTICATE_CMD_DATA NULL
+
+#define AUTO_UPDATE_PROGRAM_CMD_OPCODE 0x46u
+#define AUTO_UPDATE_PROGRAM_CMD_DATA_SIZE 0u
+#define AUTO_UPDATE_PROGRAM_RESP_SIZE 1u
+#define AUTO_UPDATE_PROGRAM_CMD_DATA NULL
+
+/*
+ * SPI Flash layout example:
+ * |------------------------------| 0x0000000
+ * | 1 KiB |
+ * | SPI "directories" |
+ * |------------------------------| 0x0000400
+ * | 1 MiB |
+ * | Reserved area |
+ * | Used for bitstream info |
+ * |------------------------------| 0x0100400
+ * | 20 MiB |
+ * | Golden Image |
+ * |------------------------------| 0x1500400
+ * | 20 MiB |
+ * | Auto Upgrade Image |
+ * |------------------------------| 0x2900400
+ * | 20 MiB |
+ * | Reserved for multi-image IAP |
+ * | Unused for Auto Upgrade |
+ * |------------------------------| 0x3D00400
+ * | ? B |
+ * | Unused |
+ * |------------------------------| 0x?
+ */
+#define AUTO_UPDATE_DIRECTORY_BASE 0u
+#define AUTO_UPDATE_DIRECTORY_WIDTH 4u
+#define AUTO_UPDATE_GOLDEN_INDEX 0u
+#define AUTO_UPDATE_UPGRADE_INDEX 1u
+#define AUTO_UPDATE_BLANK_INDEX 2u
+#define AUTO_UPDATE_GOLDEN_DIRECTORY (AUTO_UPDATE_DIRECTORY_WIDTH * AUTO_UPDATE_GOLDEN_INDEX)
+#define AUTO_UPDATE_UPGRADE_DIRECTORY (AUTO_UPDATE_DIRECTORY_WIDTH * AUTO_UPDATE_UPGRADE_INDEX)
+#define AUTO_UPDATE_BLANK_DIRECTORY (AUTO_UPDATE_DIRECTORY_WIDTH * AUTO_UPDATE_BLANK_INDEX)
+#define AUTO_UPDATE_DIRECTORY_SIZE SZ_1K
+#define AUTO_UPDATE_RESERVED_SIZE SZ_1M
+#define AUTO_UPDATE_BITSTREAM_BASE (AUTO_UPDATE_DIRECTORY_SIZE + AUTO_UPDATE_RESERVED_SIZE)
+
+struct mpfs_auto_update_config {
+ u8 feature_response_size;
+};
+
+struct mpfs_auto_update_priv {
+ struct mpfs_sys_controller *sys_controller;
+ struct device *dev;
+ struct fpga_region *region;
+ struct mpfs_auto_update_config *config;
+ struct mtd_info *flash;
+ struct dentry *debugfs_dir;
+};
+
+static struct device *mpfs_auto_update_debug_dev;
+
+static enum fpga_mgr_states mpfs_auto_update_state(struct fpga_manager *mgr)
+{
+ struct mpfs_auto_update_priv *priv = mgr->priv;
+ struct mpfs_mss_response *response;
+ struct mpfs_mss_msg *message;
+ u32 *response_msg;
+ int ret;
+ enum fpga_mgr_states rc = FPGA_MGR_STATE_WRITE_INIT_ERR;
+
+ response_msg = devm_kzalloc(priv->dev, AUTO_UPDATE_FEATURE_RESP_SIZE * sizeof(response_msg),
+ GFP_KERNEL);
+ if (!response_msg)
+ return FPGA_MGR_STATE_WRITE_INIT_ERR;
+
+ response = devm_kzalloc(priv->dev, sizeof(struct mpfs_mss_response), GFP_KERNEL);
+ if (!response) {
+ rc = FPGA_MGR_STATE_WRITE_INIT_ERR;
+ goto free_response_msg;
+ }
+
+ message = devm_kzalloc(priv->dev, sizeof(struct mpfs_mss_msg), GFP_KERNEL);
+ if (!message) {
+ rc = FPGA_MGR_STATE_WRITE_INIT_ERR;
+ goto free_response;
+ }
+
+ /*
+ * To verify that Auto Update is possible, the "Query Security Service
+ * Request" is performed. Bit 5 of byte 1 is "UL_Auto Update" & if it is
+ * set, Auto Update is not possible.
+ * This service has no command data & does not overload mbox_offset.
+ * The size of the response varies between PolarFire & PolarFire SoC.
+ */
+ response->resp_msg = response_msg;
+ response->resp_size = AUTO_UPDATE_FEATURE_RESP_SIZE;
+ message->cmd_opcode = AUTO_UPDATE_FEATURE_CMD_OPCODE;
+ message->cmd_data_size = AUTO_UPDATE_FEATURE_CMD_DATA_SIZE;
+ message->response = response;
+ message->cmd_data = AUTO_UPDATE_FEATURE_CMD_DATA;
+ message->mbox_offset = AUTO_UPDATE_DEFAULT_MBOX_OFFSET;
+ message->resp_offset = AUTO_UPDATE_DEFAULT_RESP_OFFSET;
+
+ ret = mpfs_blocking_transaction(priv->sys_controller, message);
+ if (ret | response->resp_status) {
+ rc = FPGA_MGR_STATE_UNKNOWN;
+ goto free_message;
+ }
+
+ if (!(response_msg[1] & AUTO_UPDATE_FEATURE_ENABLED))
+ rc = FPGA_MGR_STATE_OPERATING;
+
+free_message:
+ devm_kfree(priv->dev, message);
+free_response:
+ devm_kfree(priv->dev, response);
+free_response_msg:
+ devm_kfree(priv->dev, response_msg);
+
+ return rc;
+}
+
+static int mpfs_auto_update_write_init(struct fpga_manager *mgr, struct fpga_image_info *info,
+ const char *buf, size_t count)
+{
+ /*
+ * Verifying the Golden Image is idealistic. It will be evaluated
+ * against the currently programmed image and thus may fail - due to
+ * either rollback protection (if its an older version than that in use)
+ * or if the version is the same as that of the in-use image.
+ * Extracting the information as to why a failure occurred is not
+ * currently possible due to limitations of the system controller
+ * driver. If those are fixed, verification of the Golden Image should
+ * be added here.
+ */
+ return 0;
+}
+
+static int mpfs_auto_update_write(struct fpga_manager *mgr, const char *buf, size_t count)
+{
+ /*
+ * No parsing etc of the bitstream is required. The system controller
+ * will do all of that itself - including verifying that the bitstream
+ * is valid.
+ */
+ struct mpfs_auto_update_priv *priv = mgr->priv;
+ struct erase_info erase;
+ char *buffer;
+ loff_t directory_address = AUTO_UPDATE_UPGRADE_DIRECTORY;
+ size_t bytes_written = 0, bytes_read = 0;
+ size_t erase_size = AUTO_UPDATE_DIRECTORY_SIZE;
+ size_t size_per_bitstream = 0;
+ u32 image_address;
+ int ret;
+
+ priv->flash = mpfs_sys_controller_get_flash(priv->sys_controller);
+ if (!priv->flash)
+ return -EIO;
+
+ erase_size = round_up(erase_size, (u64)priv->flash->erasesize);
+
+ /*
+ * We need to calculate if we have enough space in the flash for the
+ * new image.
+ * First, chop off the first 1 KiB as it's reserved for the directory.
+ * The 1 MiB reserved for design info needs to be ignored also.
+ * All that remains is carved into 3 & rounded down to the erasesize.
+ * If this is smaller than the image size, we abort.
+ * There's also no need to consume more than 20 MiB per image.
+ */
+ size_per_bitstream = priv->flash->size - SZ_1K - SZ_1M;
+ size_per_bitstream = round_down(size_per_bitstream / 3, erase_size);
+ if (size_per_bitstream > 20 * SZ_1M)
+ size_per_bitstream = 20 * SZ_1M;
+
+ if (size_per_bitstream < count) {
+ dev_err(priv->dev,
+ "flash device has insufficient capacity to store this bitstream\n");
+ return -EINVAL;
+ }
+
+ image_address = AUTO_UPDATE_BITSTREAM_BASE + AUTO_UPDATE_UPGRADE_INDEX * size_per_bitstream;
+
+ buffer = devm_kzalloc(priv->dev, erase_size, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ erase.addr = AUTO_UPDATE_DIRECTORY_BASE;
+ erase.len = erase_size;
+
+ /*
+ * We need to write the "SPI DIRECTORY" to the first 1 KiB, telling
+ * the system controller where to find the actual bitstream. Since
+ * this is spi-nor, we have to read the first eraseblock, erase that
+ * portion of the flash, modify the data and then write it back.
+ */
+ ret = mtd_read(priv->flash, AUTO_UPDATE_DIRECTORY_BASE, erase_size, &bytes_read,
+ (u_char *)buffer);
+ if (ret)
+ goto out;
+
+ if (bytes_read != erase_size) {
+ ret = -EIO;
+ goto out;
+ }
+
+ ret = mtd_erase(priv->flash, &erase);
+ if (ret)
+ goto out;
+
+ /*
+ * Populate the image address and then zero out the next directory so
+ * that the system controller doesn't complain if in "Single Image"
+ * mode.
+ */
+ memcpy(buffer + AUTO_UPDATE_UPGRADE_DIRECTORY, &image_address, AUTO_UPDATE_DIRECTORY_WIDTH);
+ memset(buffer + AUTO_UPDATE_BLANK_DIRECTORY, 0x0, AUTO_UPDATE_DIRECTORY_WIDTH);
+
+ dev_info(priv->dev, "Writing the image address (%x) to the flash directory (%llx)\n",
+ image_address, directory_address);
+
+ ret = mtd_write(priv->flash, 0x0, erase_size, &bytes_written, (u_char *)buffer);
+ if (ret)
+ goto out;
+
+ if (bytes_written != erase_size) {
+ ret = -EIO;
+ goto out;
+ }
+
+ /*
+ * Now the .spi image itself can be written to the flash. Preservation
+ * of contents here is not important here, unlike the spi "directory"
+ * which must be RMWed.
+ */
+ erase.len = round_up(count, (size_t)priv->flash->erasesize);
+ erase.addr = image_address;
+
+ dev_info(priv->dev, "Erasing the flash at address (%x)\n", image_address);
+ ret = mtd_erase(priv->flash, &erase);
+ if (ret)
+ goto out;
+
+ dev_info(priv->dev, "Writing the image to the flash at address (%x)\n", image_address);
+ ret = mtd_write(priv->flash, (loff_t)image_address, count, &bytes_written, buf);
+ if (ret)
+ goto out;
+
+ if (bytes_written != count)
+ ret = -EIO;
+
+out:
+ devm_kfree(priv->dev, buffer);
+ return ret;
+}
+
+static int mpfs_auto_update_write_complete(struct fpga_manager *mgr, struct fpga_image_info *info)
+{
+ struct mpfs_auto_update_priv *priv = mgr->priv;
+ struct mpfs_mss_response *response;
+ struct mpfs_mss_msg *message;
+ u32 *response_msg;
+ int ret;
+
+ response_msg = devm_kzalloc(priv->dev, AUTO_UPDATE_FEATURE_RESP_SIZE * sizeof(response_msg),
+ GFP_KERNEL);
+ if (!response_msg)
+ return -ENOMEM;
+
+ response = devm_kzalloc(priv->dev, sizeof(struct mpfs_mss_response), GFP_KERNEL);
+ if (!response) {
+ ret = -ENOMEM;
+ goto free_response_msg;
+ }
+
+ message = devm_kzalloc(priv->dev, sizeof(struct mpfs_mss_msg), GFP_KERNEL);
+ if (!message) {
+ ret = -ENOMEM;
+ goto free_response;
+ }
+
+ /*
+ * The system controller can verify that an image in the flash is valid.
+ * Rather than duplicate the check in this driver, call the relevant
+ * service from the system controller instead.
+ * This service has no command data and no response data. It overloads
+ * mbox_offset with the image index in the flash's SPI directory where
+ * the bitstream is located.
+ */
+ response->resp_msg = response_msg;
+ response->resp_size = AUTO_UPDATE_AUTHENTICATE_RESP_SIZE;
+ message->cmd_opcode = AUTO_UPDATE_AUTHENTICATE_CMD_OPCODE;
+ message->cmd_data_size = AUTO_UPDATE_AUTHENTICATE_CMD_DATA_SIZE;
+ message->response = response;
+ message->cmd_data = AUTO_UPDATE_AUTHENTICATE_CMD_DATA;
+ message->mbox_offset = AUTO_UPDATE_UPGRADE_INDEX;
+ message->resp_offset = AUTO_UPDATE_DEFAULT_RESP_OFFSET;
+
+ dev_info(priv->dev, "Running verification of Upgrade Image\n");
+ ret = mpfs_blocking_transaction(priv->sys_controller, message);
+ if (ret | response->resp_status) {
+ dev_warn(priv->dev, "Verification of Upgrade Image failed!\n");
+ ret = ret ? ret : -EBADMSG;
+ }
+
+ dev_info(priv->dev, "Verification of Upgrade Image passed!\n");
+// /*
+// * If the validation has passed, initiate Auto Update.
+// * This service has no command data and no response data. It overloads
+// * mbox_offset with the image index in the flash's SPI directory where
+// * the bitstream is located.
+// * Once we attempt Auto Update either:
+// * - it passes and the board reboots
+// * - it fails and the board reboots to recover
+// * - the system controller aborts and we exit "gracefully".
+// * "gracefully" since there is no interrupt produced & it just times
+// * out.
+// */
+// response->resp_msg = response_msg;
+// response->resp_size = AUTO_UPDATE_PROGRAM_RESP_SIZE;
+// message->cmd_opcode = AUTO_UPDATE_PROGRAM_CMD_OPCODE;
+// message->cmd_data_size = AUTO_UPDATE_PROGRAM_CMD_DATA_SIZE;
+// message->response = response;
+// message->cmd_data = AUTO_UPDATE_PROGRAM_CMD_DATA;
+// message->mbox_offset = 0; //field is ignored
+// message->resp_offset = AUTO_UPDATE_DEFAULT_RESP_OFFSET;
+//
+// dev_info(priv->dev, "Running Auto Update command\n");
+// ret = mpfs_blocking_transaction(priv->sys_controller, message);
+// if (ret && ret != -ETIMEDOUT)
+// goto out;
+//
+// /* *remove this for auto update*
+// * This return 0 is dead code. Either the Auto Update will fail, or it will pass
+// * & the FPGA will be rebooted in which case mpfs_blocking_transaction()
+// * will never return and Linux will die.
+// */
+// return 0;
+
+ devm_kfree(priv->dev, message);
+free_response:
+ devm_kfree(priv->dev, response);
+free_response_msg:
+ devm_kfree(priv->dev, response_msg);
+
+ return ret;
+}
+
+static const struct fpga_manager_ops mpfs_auto_update_ops = {
+ .state = mpfs_auto_update_state,
+ .write_init = mpfs_auto_update_write_init,
+ .write = mpfs_auto_update_write,
+ .write_complete = mpfs_auto_update_write_complete,
+};
+
+static int mpfs_auto_update_run(struct device *dev)
+{
+ struct fpga_manager *mgr;
+ struct fpga_image_info *info;
+ int ret;
+
+ mgr = fpga_mgr_get(dev);
+ info = fpga_image_info_alloc(dev);
+
+ info->firmware_name = devm_kstrdup(dev, "mpfs_bitstream.spi", GFP_KERNEL);
+
+ ret = fpga_mgr_lock(mgr);
+ if (ret)
+ goto free_info;
+
+ ret = fpga_mgr_load(mgr, info);
+ if (ret) {
+ dev_err(dev, "Failed to write the bitstream\n");
+ goto unlock_mgr;
+ }
+
+unlock_mgr:
+ fpga_mgr_unlock(mgr);
+free_info:
+ fpga_image_info_free(info);
+ fpga_mgr_put(mgr);
+
+ return ret;
+}
+
+static ssize_t mpfs_auto_update_exec(struct file *file, const char __user *data, size_t count,
+ loff_t *ppos)
+{
+ int ret;
+
+ ret = mpfs_auto_update_run(mpfs_auto_update_debug_dev);
+ if (ret)
+ dev_err_probe(mpfs_auto_update_debug_dev, ret, "Auto Update failed");
+
+ return count;
+}
+
+static const struct file_operations mpfs_auto_update_fops = {
+ .owner = THIS_MODULE,
+ .open = simple_open,
+ .write = mpfs_auto_update_exec
+};
+
+static int mpfs_auto_update_debugfs_setup(struct mpfs_auto_update_priv *priv)
+{
+ priv->debugfs_dir = debugfs_create_dir("fpga", NULL);
+
+ if(IS_ERR(priv->debugfs_dir))
+ return PTR_ERR(priv->debugfs_dir);
+
+ debugfs_create_file("microchip_exec_update", 0200, priv->debugfs_dir, NULL,
+ &mpfs_auto_update_fops);
+
+ return 0;
+}
+
+static int mpfs_auto_update_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mpfs_auto_update_priv *priv;
+ struct fpga_manager *mgr;
+ enum fpga_mgr_states state;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->sys_controller = mpfs_sys_controller_get(dev);
+ if (IS_ERR(priv->sys_controller))
+ return dev_err_probe(dev, PTR_ERR(priv->sys_controller),
+ "Could not register as a sub device of the system controller\n");
+
+ priv->dev = dev;
+ platform_set_drvdata(pdev, priv);
+
+ mgr = devm_fpga_mgr_register(dev, "Microchip MPFS Auto Update FPGA Manager",
+ &mpfs_auto_update_ops, priv);
+ if (IS_ERR(mgr))
+ return dev_err_probe(dev, PTR_ERR(mgr), "Could not register FPGA manager.\n");
+
+ state = mpfs_auto_update_state(mgr);
+ if (state != FPGA_MGR_STATE_OPERATING)
+ return -EIO;
+
+ ret = mpfs_auto_update_debugfs_setup(priv);
+ if (ret && ret != -ENODEV)
+ return ret;
+
+ mpfs_auto_update_debug_dev = priv->dev;
+
+ return 0;
+}
+
+static struct platform_driver mpfs_auto_update_driver = {
+ .driver = {
+ .name = "mpfs-auto-update",
+ },
+ .probe = mpfs_auto_update_probe,
+};
+module_platform_driver(mpfs_auto_update_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Conor Dooley <conor.dooley at microchip.com>");
+MODULE_DESCRIPTION("PolarFire SoC Auto Update FPGA reprogramming");
--
2.39.1
More information about the linux-riscv
mailing list