[PATCH v8 1/3] riscv: Introduce CONFIG_RELOCATABLE
Alexandre Ghiti
alexghiti at rivosinc.com
Wed Feb 15 06:36:24 PST 2023
From: Alexandre Ghiti <alex at ghiti.fr>
This config allows to compile 64b kernel as PIE and to relocate it at
any virtual address at runtime: this paves the way to KASLR.
Runtime relocation is possible since relocation metadata are embedded into
the kernel.
Note that relocating at runtime introduces an overhead even if the
kernel is loaded at the same address it was linked at and that the compiler
options are those used in arm64 which uses the same RELA relocation
format.
Signed-off-by: Alexandre Ghiti <alex at ghiti.fr>
---
arch/riscv/Kconfig | 14 +++++++++
arch/riscv/Makefile | 7 +++--
arch/riscv/kernel/efi-header.S | 6 ++--
arch/riscv/kernel/vmlinux.lds.S | 10 ++++--
arch/riscv/mm/Makefile | 4 +++
arch/riscv/mm/init.c | 54 ++++++++++++++++++++++++++++++++-
6 files changed, 87 insertions(+), 8 deletions(-)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index e2b656043abf..e0ee7ce4b2e3 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -544,6 +544,20 @@ config COMPAT
If you want to execute 32-bit userspace applications, say Y.
+config RELOCATABLE
+ bool "Build a relocatable kernel"
+ depends on MMU && 64BIT && !XIP_KERNEL
+ help
+ This builds a kernel as a Position Independent Executable (PIE),
+ which retains all relocation metadata required to relocate the
+ kernel binary at runtime to a different virtual address than the
+ address it was linked at.
+ Since RISCV uses the RELA relocation format, this requires a
+ relocation pass at runtime even if the kernel is loaded at the
+ same address it was linked at.
+
+ If unsure, say N.
+
endmenu # "Kernel features"
menu "Boot options"
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index 82153960ac00..97c34136b027 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -7,9 +7,12 @@
#
OBJCOPYFLAGS := -O binary
-LDFLAGS_vmlinux :=
+ifeq ($(CONFIG_RELOCATABLE),y)
+ LDFLAGS_vmlinux += -shared -Bsymbolic -z notext -z norelro
+ KBUILD_CFLAGS += -fPIE
+endif
ifeq ($(CONFIG_DYNAMIC_FTRACE),y)
- LDFLAGS_vmlinux := --no-relax
+ LDFLAGS_vmlinux += --no-relax
KBUILD_CPPFLAGS += -DCC_USING_PATCHABLE_FUNCTION_ENTRY
CC_FLAGS_FTRACE := -fpatchable-function-entry=8
endif
diff --git a/arch/riscv/kernel/efi-header.S b/arch/riscv/kernel/efi-header.S
index 8e733aa48ba6..f7ee09c4f12d 100644
--- a/arch/riscv/kernel/efi-header.S
+++ b/arch/riscv/kernel/efi-header.S
@@ -33,7 +33,7 @@ optional_header:
.byte 0x02 // MajorLinkerVersion
.byte 0x14 // MinorLinkerVersion
.long __pecoff_text_end - efi_header_end // SizeOfCode
- .long __pecoff_data_virt_size // SizeOfInitializedData
+ .long __pecoff_data_virt_end - __pecoff_text_end // SizeOfInitializedData
.long 0 // SizeOfUninitializedData
.long __efistub_efi_pe_entry - _start // AddressOfEntryPoint
.long efi_header_end - _start // BaseOfCode
@@ -91,9 +91,9 @@ section_table:
IMAGE_SCN_MEM_EXECUTE // Characteristics
.ascii ".data\0\0\0"
- .long __pecoff_data_virt_size // VirtualSize
+ .long __pecoff_data_virt_end - __pecoff_text_end // VirtualSize
.long __pecoff_text_end - _start // VirtualAddress
- .long __pecoff_data_raw_size // SizeOfRawData
+ .long __pecoff_data_raw_end - __pecoff_text_end // SizeOfRawData
.long __pecoff_text_end - _start // PointerToRawData
.long 0 // PointerToRelocations
diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
index 4e6c88aa4d87..8be2de3be08c 100644
--- a/arch/riscv/kernel/vmlinux.lds.S
+++ b/arch/riscv/kernel/vmlinux.lds.S
@@ -122,9 +122,15 @@ SECTIONS
*(.sdata*)
}
+ .rela.dyn : ALIGN(8) {
+ __rela_dyn_start = .;
+ *(.rela .rela*)
+ __rela_dyn_end = .;
+ }
+
#ifdef CONFIG_EFI
.pecoff_edata_padding : { BYTE(0); . = ALIGN(PECOFF_FILE_ALIGNMENT); }
- __pecoff_data_raw_size = ABSOLUTE(. - __pecoff_text_end);
+ __pecoff_data_raw_end = ABSOLUTE(.);
#endif
/* End of data section */
@@ -134,7 +140,7 @@ SECTIONS
#ifdef CONFIG_EFI
. = ALIGN(PECOFF_SECTION_ALIGNMENT);
- __pecoff_data_virt_size = ABSOLUTE(. - __pecoff_text_end);
+ __pecoff_data_virt_end = ABSOLUTE(.);
#endif
_end = .;
diff --git a/arch/riscv/mm/Makefile b/arch/riscv/mm/Makefile
index 2ac177c05352..b85e9e82f082 100644
--- a/arch/riscv/mm/Makefile
+++ b/arch/riscv/mm/Makefile
@@ -1,6 +1,10 @@
# SPDX-License-Identifier: GPL-2.0-only
CFLAGS_init.o := -mcmodel=medany
+ifdef CONFIG_RELOCATABLE
+CFLAGS_init.o += -fno-pie
+endif
+
ifdef CONFIG_FTRACE
CFLAGS_REMOVE_init.o = $(CC_FLAGS_FTRACE)
CFLAGS_REMOVE_cacheflush.o = $(CC_FLAGS_FTRACE)
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 7f01c2e56efe..3862696c2ac9 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -20,6 +20,9 @@
#include <linux/dma-map-ops.h>
#include <linux/crash_dump.h>
#include <linux/hugetlb.h>
+#ifdef CONFIG_RELOCATABLE
+#include <linux/elf.h>
+#endif
#include <asm/fixmap.h>
#include <asm/tlbflush.h>
@@ -146,7 +149,7 @@ static void __init print_vm_layout(void)
print_ml("kasan", KASAN_SHADOW_START, KASAN_SHADOW_END);
#endif
- print_ml("kernel", (unsigned long)KERNEL_LINK_ADDR,
+ print_ml("kernel", (unsigned long)kernel_map.virt_addr,
(unsigned long)ADDRESS_SPACE_END);
}
}
@@ -854,6 +857,44 @@ static __init void set_satp_mode(uintptr_t dtb_pa)
#error "setup_vm() is called from head.S before relocate so it should not use absolute addressing."
#endif
+#ifdef CONFIG_RELOCATABLE
+extern unsigned long __rela_dyn_start, __rela_dyn_end;
+
+static void __init relocate_kernel(void)
+{
+ Elf64_Rela *rela = (Elf64_Rela *)&__rela_dyn_start;
+ /*
+ * This holds the offset between the linked virtual address and the
+ * relocated virtual address.
+ */
+ uintptr_t reloc_offset = kernel_map.virt_addr - KERNEL_LINK_ADDR;
+ /*
+ * This holds the offset between kernel linked virtual address and
+ * physical address.
+ */
+ uintptr_t va_kernel_link_pa_offset = KERNEL_LINK_ADDR - kernel_map.phys_addr;
+
+ for ( ; rela < (Elf64_Rela *)&__rela_dyn_end; rela++) {
+ Elf64_Addr addr = (rela->r_offset - va_kernel_link_pa_offset);
+ Elf64_Addr relocated_addr = rela->r_addend;
+
+ if (rela->r_info != R_RISCV_RELATIVE)
+ continue;
+
+ /*
+ * Make sure to not relocate vdso symbols like rt_sigreturn
+ * which are linked from the address 0 in vmlinux since
+ * vdso symbol addresses are actually used as an offset from
+ * mm->context.vdso in VDSO_OFFSET macro.
+ */
+ if (relocated_addr >= KERNEL_LINK_ADDR)
+ relocated_addr += reloc_offset;
+
+ *(Elf64_Addr *)addr = relocated_addr;
+ }
+}
+#endif /* CONFIG_RELOCATABLE */
+
#ifdef CONFIG_XIP_KERNEL
static void __init create_kernel_page_table(pgd_t *pgdir,
__always_unused bool early)
@@ -1039,6 +1080,17 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
BUG_ON((kernel_map.virt_addr + kernel_map.size) > ADDRESS_SPACE_END - SZ_4K);
#endif
+#ifdef CONFIG_RELOCATABLE
+ /*
+ * Early page table uses only one PUD, which makes it possible
+ * to map PUD_SIZE aligned on PUD_SIZE: if the relocation offset
+ * makes the kernel cross over a PUD_SIZE boundary, raise a bug
+ * since a part of the kernel would not get mapped.
+ */
+ BUG_ON(PUD_SIZE - (kernel_map.virt_addr & (PUD_SIZE - 1)) < kernel_map.size);
+ relocate_kernel();
+#endif
+
apply_early_boot_alternatives();
pt_ops_set_early();
--
2.37.2
More information about the linux-riscv
mailing list