[PATCH 10/7] riscv: Implement the new page table range API

Yin, Fengwei fengwei.yin at intel.com
Wed Feb 15 04:27:27 PST 2023



On 2/15/2023 4:35 PM, Yin Fengwei wrote:
> On Wed, 2023-02-15 at 00:04 +0000, Matthew Wilcox (Oracle) wrote:
>> Add set_ptes(), update_mmu_cache_range() and flush_dcache_folio().
>>
>> The PG_dcache_clear flag changes from being a per-page bit to being a
>> per-folio bit.
>>
>> Signed-off-by: Matthew Wilcox (Oracle) <willy at infradead.org>
>> ---
>>  arch/riscv/include/asm/cacheflush.h | 19 +++++++++----------
>>  arch/riscv/include/asm/pgtable.h    | 25 ++++++++++++++++++-------
>>  arch/riscv/mm/cacheflush.c          | 11 ++---------
>>  3 files changed, 29 insertions(+), 26 deletions(-)
>>
>> diff --git a/arch/riscv/include/asm/cacheflush.h
>> b/arch/riscv/include/asm/cacheflush.h
>> index 03e3b95ae6da..10e5e96f09b5 100644
>> --- a/arch/riscv/include/asm/cacheflush.h
>> +++ b/arch/riscv/include/asm/cacheflush.h
>> @@ -15,20 +15,19 @@ static inline void local_flush_icache_all(void)
>>  
>>  #define PG_dcache_clean PG_arch_1
>>  
>> -static inline void flush_dcache_page(struct page *page)
>> +static inline void flush_dcache_folio(struct folio *folio)
>>  {
>> -       /*
>> -        * HugeTLB pages are always fully mapped and only head page
>> will be
>> -        * set PG_dcache_clean (see comments in flush_icache_pte()).
>> -        */
>> -       if (PageHuge(page))
>> -               page = compound_head(page);
>> -
>> -       if (test_bit(PG_dcache_clean, &page->flags))
>> -               clear_bit(PG_dcache_clean, &page->flags);
>> +       if (test_bit(PG_dcache_clean, &folio->flags))
>> +               clear_bit(PG_dcache_clean, &folio->flags);
>>  }
>> +#define flush_dcache_folio flush_dcache_folio
>>  #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
>>  
>> +static inline void flush_dcache_page(struct page *page)
>> +{
>> +       flush_dcache_folio(page_folio(page));
>> +}
>> +
>>  /*
>>   * RISC-V doesn't have an instruction to flush parts of the
>> instruction cache,
>>   * so instead we just flush the whole thing.
>> diff --git a/arch/riscv/include/asm/pgtable.h
>> b/arch/riscv/include/asm/pgtable.h
>> index 13222fd5c4b4..03706c833e70 100644
>> --- a/arch/riscv/include/asm/pgtable.h
>> +++ b/arch/riscv/include/asm/pgtable.h
>> @@ -405,8 +405,8 @@ static inline pte_t pte_modify(pte_t pte,
>> pgprot_t newprot)
>>  
>>  
>>  /* Commit new configuration to MMU hardware */
>> -static inline void update_mmu_cache(struct vm_area_struct *vma,
>> -       unsigned long address, pte_t *ptep)
>> +static inline void update_mmu_cache_range(struct vm_area_struct
>> *vma,
>> +               unsigned long address, pte_t *ptep, unsigned int nr)
>>  {
>>         /*
>>          * The kernel assumes that TLBs don't cache invalid entries,
>> but
>> @@ -415,8 +415,10 @@ static inline void update_mmu_cache(struct
>> vm_area_struct *vma,
>>          * Relying on flush_tlb_fix_spurious_fault would suffice, but
>>          * the extra traps reduce performance.  So, eagerly
>> SFENCE.VMA.
>>          */
>> -       flush_tlb_page(vma, address);
>> +       flush_tlb_range(vma, address, address + nr * PAGE_SIZE);
> 
> The flush_tlb_range() of riscv is a little bit strange to me. It gives
> __sbi_tlb_flush_range() stride PAGE_SIZE. That means if (end - start)
> is larger than stride, it will trigger flush_tlb_all().
> 
> So this change could trigger flush_tlb_all() while original
> flush_tlb_page() just trigger flush_tlb_page().
> 
> My understanding is flush_tlb_page() should be better because 
> flush_pmd_tlb_range() has PMD_SIZE as stride to avoid flush_tlb_all().
> I must miss something here.
So the huge page can have one TLB for huge page. So PMD_SIZE here
makes sense.

Regards
Yin, Fengwei 

> 
> Regards
> Yin, Fengwei
> 
>>  }
>> +#define update_mmu_cache(vma, addr, ptep) \
>> +       update_mmu_cache_range(vma, addr, ptep, 1)
>>  
>>  #define __HAVE_ARCH_UPDATE_MMU_TLB
>>  #define update_mmu_tlb update_mmu_cache
>> @@ -456,12 +458,21 @@ static inline void __set_pte_at(struct
>> mm_struct *mm,
>>         set_pte(ptep, pteval);
>>  }
>>  
>> -static inline void set_pte_at(struct mm_struct *mm,
>> -       unsigned long addr, pte_t *ptep, pte_t pteval)
>> +static inline void set_ptes(struct mm_struct *mm, unsigned long
>> addr,
>> +               pte_t *ptep, pte_t pteval, unsigned int nr)
>>  {
>> -       page_table_check_ptes_set(mm, addr, ptep, pteval, 1);
>> -       __set_pte_at(mm, addr, ptep, pteval);
>> +       page_table_check_ptes_set(mm, addr, ptep, pteval, nr);
>> +
>> +       for (;;) {
>> +               __set_pte_at(mm, addr, ptep, pteval);
>> +               if (--nr == 0)
>> +                       break;
>> +               ptep++;
>> +               addr += PAGE_SIZE;
>> +               pte_val(pteval) += 1 << _PAGE_PFN_SHIFT;
>> +       }
>>  }
>> +#define set_pte_at(mm, addr, ptep, pte) set_ptes(mm, addr, ptep,
>> pte, 1)
>>  
>>  static inline void pte_clear(struct mm_struct *mm,
>>         unsigned long addr, pte_t *ptep)
>> diff --git a/arch/riscv/mm/cacheflush.c b/arch/riscv/mm/cacheflush.c
>> index 3cc07ed45aeb..b725c3f6f57f 100644
>> --- a/arch/riscv/mm/cacheflush.c
>> +++ b/arch/riscv/mm/cacheflush.c
>> @@ -81,16 +81,9 @@ void flush_icache_mm(struct mm_struct *mm, bool
>> local)
>>  #ifdef CONFIG_MMU
>>  void flush_icache_pte(pte_t pte)
>>  {
>> -       struct page *page = pte_page(pte);
>> +       struct folio *folio = page_folio(pte_page(pte));
>>  
>> -       /*
>> -        * HugeTLB pages are always fully mapped, so only setting
>> head page's
>> -        * PG_dcache_clean flag is enough.
>> -        */
>> -       if (PageHuge(page))
>> -               page = compound_head(page);
>> -
>> -       if (!test_and_set_bit(PG_dcache_clean, &page->flags))
>> +       if (!test_and_set_bit(PG_dcache_clean, &folio->flags))
>>                 flush_icache_all();
>>  }
>>  #endif /* CONFIG_MMU */
> 



More information about the linux-riscv mailing list