[PATCH v3 0/3] StarFive's SDIO/eMMC driver support

[Ulf Hansson]

On Fri, 3 Feb 2023 at 09:19, William Qiu <william.qiu at starfivetech.com> wrote:
>
> Hi,
>
> This patchset adds initial rudimentary support for the StarFive
> designware mobile storage host controller driver. And this driver will
> be used in StarFive's VisionFive 2 board. The main purpose of adding
> this driver is to accommodate the ultra-high speed mode of eMMC.
>
> The last patch should be applied after the patchset [1]:
> [1] https://lore.kernel.org/all/20221220011247.35560-1-hal.feng@starfivetech.com/
>
> Changes since v2:
> - Wraped commit message according to Linux coding style.
> - Rephrased the description of the patches.
> - Changed the description of syscon regsiter.
> - Dropped redundant properties.
>
> The patch series is based on v6.1.
>
> William Qiu (3):
>   dt-bindings: mmc: Add StarFive MMC module
>   mmc: starfive: Add sdio/emmc driver support
>   riscv: dts: starfive: Add mmc node
>
>  .../bindings/mmc/starfive,jh7110-mmc.yaml     |  77 ++++++++
>  MAINTAINERS                                   |   6 +
>  .../jh7110-starfive-visionfive-2.dtsi         |  23 +++
>  arch/riscv/boot/dts/starfive/jh7110.dtsi      |  37 ++++
>  drivers/mmc/host/Kconfig                      |  10 +
>  drivers/mmc/host/Makefile                     |   1 +
>  drivers/mmc/host/dw_mmc-starfive.c            | 185 ++++++++++++++++++
>  7 files changed, 339 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mmc/starfive,jh7110-mmc.yaml
>  create mode 100644 drivers/mmc/host/dw_mmc-starfive.c
>

Patch 1 and patch 2 applied for next, thanks!

Note that I fixed some checkpatch errors/warnings. Next time, please
run ./scripts/checkpatch.pl before you submit your patches.

Kind regards
Uffe