[PATCH 07/12] dt-bindings: net: Add StarFive JH7100 SoC

Andrew Lunn andrew at lunn.ch
Sat Feb 11 08:01:37 PST 2023


> +  starfive,gtxclk-dlychain:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description: GTX clock delay chain setting

Please could you add more details to this. Is this controlling the
RGMII delays? 0ns or 2ns?

> +    gmac: ethernet at 10020000 {
> +      compatible = "starfive,jh7100-dwmac", "snps,dwmac";
> +      reg = <0x0 0x10020000 0x0 0x10000>;
> +      clocks = <&clkgen JH7100_CLK_GMAC_ROOT_DIV>,
> +               <&clkgen JH7100_CLK_GMAC_AHB>,
> +               <&clkgen JH7100_CLK_GMAC_PTP_REF>,
> +               <&clkgen JH7100_CLK_GMAC_GTX>,
> +               <&clkgen JH7100_CLK_GMAC_TX_INV>;
> +      clock-names = "stmmaceth", "pclk", "ptp_ref", "gtxc", "tx";
> +      resets = <&rstgen JH7100_RSTN_GMAC_AHB>;
> +      reset-names = "ahb";
> +      interrupts = <6>, <7>;
> +      interrupt-names = "macirq", "eth_wake_irq";
> +      max-frame-size = <9000>;
> +      phy-mode = "rgmii-txid";

This is unusual. Does your board have a really long RX clock line to
insert the 2ns delay needed on the RX side?

       Andrew



More information about the linux-riscv mailing list