[PATCH v1 2/3] dma: dw-axi-dmac: Add support for StarFive DMA

Vinod Koul vkoul at kernel.org
Fri Feb 10 00:59:23 PST 2023


On 06-02-23, 19:38, Walker Chen wrote:
> Adding DMA reset operation in device probe, and using different
> registers according to the hardware handshake number.

subsystem tag is dmaengine: xxx

> 
> Signed-off-by: Walker Chen <walker.chen at starfivetech.com>
> ---
>  .../dma/dw-axi-dmac/dw-axi-dmac-platform.c    | 25 ++++++++++++++++---
>  drivers/dma/dw-axi-dmac/dw-axi-dmac.h         |  3 +++
>  2 files changed, 24 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
> index a183d93bd7e2..3581810033d2 100644
> --- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
> +++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
> @@ -25,6 +25,7 @@
>  #include <linux/platform_device.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/property.h>
> +#include <linux/reset.h>
>  #include <linux/slab.h>
>  #include <linux/types.h>
>  
> @@ -86,7 +87,8 @@ static inline void axi_chan_config_write(struct axi_dma_chan *chan,
>  
>  	cfg_lo = (config->dst_multblk_type << CH_CFG_L_DST_MULTBLK_TYPE_POS |
>  		  config->src_multblk_type << CH_CFG_L_SRC_MULTBLK_TYPE_POS);
> -	if (chan->chip->dw->hdata->reg_map_8_channels) {
> +	if (chan->chip->dw->hdata->reg_map_8_channels &&
> +	    !chan->chip->dw->hdata->use_cfg2) {

what about older/other platforms that dont have use_cfg2?

>  		cfg_hi = config->tt_fc << CH_CFG_H_TT_FC_POS |
>  			 config->hs_sel_src << CH_CFG_H_HS_SEL_SRC_POS |
>  			 config->hs_sel_dst << CH_CFG_H_HS_SEL_DST_POS |
> @@ -541,8 +543,6 @@ static void dw_axi_dma_set_hw_channel(struct axi_dma_chan *chan, bool set)
>  			(chan->id * DMA_APB_HS_SEL_BIT_SIZE));
>  	reg_value |= (val << (chan->id * DMA_APB_HS_SEL_BIT_SIZE));
>  	lo_hi_writeq(reg_value, chip->apb_regs + DMAC_APB_HW_HS_SEL_0);
> -
> -	return;
>  }
>  
>  /*
> @@ -1136,7 +1136,7 @@ static int dma_chan_terminate_all(struct dma_chan *dchan)
>  	axi_chan_disable(chan);
>  
>  	ret = readl_poll_timeout_atomic(chan->chip->regs + DMAC_CHEN, val,
> -					!(val & chan_active), 1000, 10000);
> +					!(val & chan_active), 1000, DMAC_TIMEOUT_US);
>  	if (ret == -ETIMEDOUT)
>  		dev_warn(dchan2dev(dchan),
>  			 "%s failed to stop\n", axi_chan_name(chan));
> @@ -1323,6 +1323,12 @@ static int parse_device_properties(struct axi_dma_chip *chip)
>  
>  	chip->dw->hdata->m_data_width = tmp;
>  
> +	ret = device_property_read_u32(dev, "snps,num-hs-if", &tmp);
> +	if (!ret) {
> +		if (tmp > 16)
> +			chip->dw->hdata->use_cfg2 = true;
> +	}
> +
>  	ret = device_property_read_u32_array(dev, "snps,block-size", carr,
>  					     chip->dw->hdata->nr_channels);
>  	if (ret)
> @@ -1410,6 +1416,16 @@ static int dw_probe(struct platform_device *pdev)
>  	if (IS_ERR(chip->cfgr_clk))
>  		return PTR_ERR(chip->cfgr_clk);
>  
> +	if (of_device_is_compatible(node, "starfive,axi-dma")) {
> +		chip->resets = devm_reset_control_array_get_exclusive(&pdev->dev);
> +		if (IS_ERR(chip->resets))
> +			return PTR_ERR(chip->resets);
> +
> +		ret = reset_control_deassert(chip->resets);
> +		if (ret)
> +			return ret;
> +	}
> +
>  	ret = parse_device_properties(chip);
>  	if (ret)
>  		return ret;
> @@ -1554,6 +1570,7 @@ static const struct dev_pm_ops dw_axi_dma_pm_ops = {
>  static const struct of_device_id dw_dma_of_id_table[] = {
>  	{ .compatible = "snps,axi-dma-1.01a" },
>  	{ .compatible = "intel,kmb-axi-dma" },
> +	{ .compatible = "starfive,axi-dma" },
>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, dw_dma_of_id_table);
> diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
> index e9d5eb0fd594..761d95691c02 100644
> --- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
> +++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
> @@ -21,6 +21,7 @@
>  #define DMAC_MAX_CHANNELS	16
>  #define DMAC_MAX_MASTERS	2
>  #define DMAC_MAX_BLK_SIZE	0x200000
> +#define DMAC_TIMEOUT_US		200000
>  
>  struct dw_axi_dma_hcfg {
>  	u32	nr_channels;
> @@ -33,6 +34,7 @@ struct dw_axi_dma_hcfg {
>  	/* Register map for DMAX_NUM_CHANNELS <= 8 */
>  	bool	reg_map_8_channels;
>  	bool	restrict_axi_burst_len;
> +	bool	use_cfg2;
>  };
>  
>  struct axi_dma_chan {
> @@ -70,6 +72,7 @@ struct axi_dma_chip {
>  	struct clk		*core_clk;
>  	struct clk		*cfgr_clk;
>  	struct dw_axi_dma	*dw;
> +	struct reset_control	*resets;
>  };
>  
>  /* LLI == Linked List Item */
> -- 
> 2.17.1

-- 
~Vinod



More information about the linux-riscv mailing list