[PATCH v2 0/4] crypto: starfive - Add drivers for crypto engine

[JiaJie Ho]

> -----Original Message-----
> From: Jia Jie Ho <jiajie.ho at starfivetech.com>
> Sent: 30 January, 2023 11:43 PM
> To: Herbert Xu <herbert at gondor.apana.org.au>; David S . Miller
> <davem at davemloft.net>; Rob Herring <robh+dt at kernel.org>; Krzysztof
> Kozlowski <krzysztof.kozlowski+dt at linaro.org>; Emil Renner Berthing
> <kernel at esmil.dk>; Conor Dooley <conor.dooley at microchip.com>
> Cc: linux-crypto at vger.kernel.org; devicetree at vger.kernel.org; linux-
> kernel at vger.kernel.org; linux-riscv at lists.infradead.org
> Subject: [PATCH v2 0/4] crypto: starfive - Add drivers for crypto engine
> 
> This patch series adds kernel driver support for StarFive JH7110 crypto engine.
> The first patch add Documentations for the device and Patch 2 adds device
> probe and DMA init for the module. Patch 3 adds crypto and DMA dts node
> for VisionFive 2 board. Patch 4 adds hash/hmac support to the module.
> 
> Patch 3 needs to be applied on top of:
> https://patchwork.kernel.org/project/linux-
> riscv/patch/20221220011247.35560-7-hal.feng at starfivetech.com/
> https://patchwork.kernel.org/project/linux-
> riscv/cover/20230120024445.244345-1-xingyu.wu at starfivetech.com/
> 
> Changes v1->v2:
> - Fixed yaml filename and format (Krzysztof)
> - Removed unnecessary property names in yaml (Krzysztof)
> - Moved of_device_id table close to usage (Krzysztof)
> - Use dev_err_probe for error returns (Krzysztof)
> - Dropped redundant readl and writel wrappers (Krzysztof)
> - Updated commit signed offs (Conor)
> - Dropped redundant node in dts, module set to on in dtsi (Conor)
> 
> Jia Jie Ho (4):
>   dt-bindings: crypto: Add StarFive crypto module
>   crypto: starfive - Add crypto engine support
>   riscv: dts: starfive: Add crypto and DMA node for VisionFive 2
>   crypto: starfive - Add hash and HMAC support
> 
>  .../crypto/starfive,jh7110-crypto.yaml        |   70 ++
>  MAINTAINERS                                   |    7 +
>  arch/riscv/boot/dts/starfive/jh7110.dtsi      |   27 +
>  drivers/crypto/Kconfig                        |    1 +
>  drivers/crypto/Makefile                       |    1 +
>  drivers/crypto/starfive/Kconfig               |   20 +
>  drivers/crypto/starfive/Makefile              |    4 +
>  drivers/crypto/starfive/starfive-cryp.c       |  238 ++++
>  drivers/crypto/starfive/starfive-hash.c       | 1095 +++++++++++++++++
>  drivers/crypto/starfive/starfive-regs.h       |   71 ++
>  drivers/crypto/starfive/starfive-str.h        |   99 ++
>  11 files changed, 1633 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/crypto/starfive,jh7110-crypto.yaml
>  create mode 100644 drivers/crypto/starfive/Kconfig  create mode 100644
> drivers/crypto/starfive/Makefile  create mode 100644
> drivers/crypto/starfive/starfive-cryp.c
>  create mode 100644 drivers/crypto/starfive/starfive-hash.c
>  create mode 100644 drivers/crypto/starfive/starfive-regs.h
>  create mode 100644 drivers/crypto/starfive/starfive-str.h
> 
> --
> 2.25.1

Hi all,

Could you please review this patch series?
Or should I send a new version with Rob's sign-off on patch 1?
Thank you in advance.

Best regards,
Jia Jie