[PATCH v4 07/14] RISC-V: KVM: Add skeleton support for perf

Tue Feb 7 01:20:12 PST 2023

On Mon, Feb 6, 2023 at 3:39 AM Andrew Jones <ajones at ventanamicro.com> wrote:
>
> On Mon, Feb 06, 2023 at 10:22:04AM +0100, Andrew Jones wrote:
> > On Sat, Feb 04, 2023 at 11:37:47PM -0800, Atish Patra wrote:
> > > On Fri, Feb 3, 2023 at 12:47 AM Atish Patra <atishp at atishpatra.org> wrote:
> > > >
> > > > On Thu, Feb 2, 2023 at 9:03 AM Andrew Jones <ajones at ventanamicro.com> wrote:
> > > > >
> > > > > On Wed, Feb 01, 2023 at 03:12:43PM -0800, Atish Patra wrote:
> > > > > > This patch only adds barebone structure of perf implementation. Most of
> > > > > > the function returns zero at this point and will be implemented
> > > > > > fully in the future.
> > > > > >
> > > > > > Signed-off-by: Atish Patra <atishp at rivosinc.com>
> > > > > > ---
> > > > > >  arch/riscv/include/asm/kvm_host.h     |   4 +
> > > > > >  arch/riscv/include/asm/kvm_vcpu_pmu.h |  78 +++++++++++++++
> > > > > >  arch/riscv/kvm/Makefile               |   1 +
> > > > > >  arch/riscv/kvm/vcpu.c                 |   7 ++
> > > > > >  arch/riscv/kvm/vcpu_pmu.c             | 136 ++++++++++++++++++++++++++
> > > > > >  5 files changed, 226 insertions(+)
> > > > > >  create mode 100644 arch/riscv/include/asm/kvm_vcpu_pmu.h
> > > > > >  create mode 100644 arch/riscv/kvm/vcpu_pmu.c
> > > > > >
> > > > > > diff --git a/arch/riscv/include/asm/kvm_host.h b/arch/riscv/include/asm/kvm_host.h
> > > > > > index 93f43a3..b90be9a 100644
> > > > > > --- a/arch/riscv/include/asm/kvm_host.h
> > > > > > +++ b/arch/riscv/include/asm/kvm_host.h
> > > > > > @@ -18,6 +18,7 @@
> > > > > >  #include <asm/kvm_vcpu_insn.h>
> > > > > >  #include <asm/kvm_vcpu_sbi.h>
> > > > > >  #include <asm/kvm_vcpu_timer.h>
> > > > > > +#include <asm/kvm_vcpu_pmu.h>
> > > > > >
> > > > > >  #define KVM_MAX_VCPUS                        1024
> > > > > >
> > > > > > @@ -228,6 +229,9 @@ struct kvm_vcpu_arch {
> > > > > >
> > > > > >       /* Don't run the VCPU (blocked) */
> > > > > >       bool pause;
> > > > > > +
> > > > > > +     /* Performance monitoring context */
> > > > > > +     struct kvm_pmu pmu_context;
> > > > > >  };
> > > > > >
> > > > > >  static inline void kvm_arch_hardware_unsetup(void) {}
> > > > > > diff --git a/arch/riscv/include/asm/kvm_vcpu_pmu.h b/arch/riscv/include/asm/kvm_vcpu_pmu.h
> > > > > > new file mode 100644
> > > > > > index 0000000..e2b4038
> > > > > > --- /dev/null
> > > > > > +++ b/arch/riscv/include/asm/kvm_vcpu_pmu.h
> > > > > > @@ -0,0 +1,78 @@
> > > > > > +/* SPDX-License-Identifier: GPL-2.0-only */
> > > > > > +/*
> > > > > > + * Copyright (c) 2023 Rivos Inc
> > > > > > + *
> > > > > > + * Authors:
> > > > > > + *     Atish Patra <atishp at rivosinc.com>
> > > > > > + */
> > > > > > +
> > > > > > +#ifndef __KVM_VCPU_RISCV_PMU_H
> > > > > > +#define __KVM_VCPU_RISCV_PMU_H
> > > > > > +
> > > > > > +#include <linux/perf/riscv_pmu.h>
> > > > > > +#include <asm/kvm_vcpu_sbi.h>
> > > > > > +#include <asm/sbi.h>
> > > > > > +
> > > > > > +#ifdef CONFIG_RISCV_PMU_SBI
> > > > > > +#define RISCV_KVM_MAX_FW_CTRS        32
> > > > > > +
> > > > > > +#if RISCV_KVM_MAX_FW_CTRS > 32
> > > > > > +#error "Maximum firmware counter can't exceed 32 without increasing the RISCV_MAX_COUNTERS"
> > > > >
> > > > > "The number of firmware counters cannot exceed 32 without increasing RISCV_MAX_COUNTERS"
> > > > >
> > > > > > +#endif
> > > > > > +
> > > > > > +#define RISCV_MAX_COUNTERS      64
> > > > >
> > > > > But instead of that message, what I think we need is something like
> > > > >
> > > > >  #define RISCV_KVM_MAX_HW_CTRS  32
> > > > >  #define RISCV_KVM_MAX_FW_CTRS  32
> > > > >  #define RISCV_MAX_COUNTERS     (RISCV_KVM_MAX_HW_CTRS + RISCV_KVM_MAX_FW_CTRS)
> > > > >
> > > > >  static_assert(RISCV_MAX_COUNTERS <= 64)
> > > > >
> > > > > And then in pmu_sbi_device_probe() should ensure
> > > > >
> > > > >   num_counters <= RISCV_MAX_COUNTERS
> > > > >
> > > > > and pmu_sbi_get_ctrinfo() should ensure
> > > > >
> > > > >   num_hw_ctr <= RISCV_KVM_MAX_HW_CTRS
> > > > >   num_fw_ctr <= RISCV_KVM_MAX_FW_CTRS
> > > > >
> > > > > which has to be done at runtime.
> > > > >
> > > >
> > > > Sure. I will add the additional sanity checks.
> > > >
> > >
> > > As explained above, I feel we shouldn't mix the firmware number of
> > > counters that the host gets and it exposes to a guest.
> > > So I have not included this suggestion in the v5.
> > > I have changed the num_fw_ctrs to PMU_FW_MAX though to accurately
> > > reflect the firmware counters KVM is actually using.
> >
> > Sounds good
>
> I just looked at v5. IMO, much of what I proposed above still makes
> sense, since what I'm proposing is that the relationship between
> RISCV_KVM_MAX_HW_CTRS, RISCV_KVM_MAX_FW_CTRS, RISCV_MAX_COUNTERS, and 64
> (our current max bitmap size) be explicitly checked. So, even if we want
> RISCV_KVM_MAX_FW_CTRS to be SBI_PMU_FW_MAX, it'd be good to have
>
> #define RISCV_KVM_MAX_HW_CTRS  32
>
> (And a runtime check confirming num_hw_ctrs + 1 <= RISCV_KVM_MAX_HW_CTRS,
>  and then either silently capping or issuing a warning and capping)
>
> And, to be sure the sum of RISCV_KVM_MAX_FW_CTRS and RISCV_KVM_MAX_HW_CTRS
> doesn't exceed the size of the bitmap
>
> #define RISCV_KVM_MAX_FW_CTRS   SBI_PMU_FW_MAX
> #define RISCV_MAX_COUNTERS      (RISCV_KVM_MAX_HW_CTRS + RISCV_KVM_MAX_FW_CTRS)
> static_assert(RISCV_MAX_COUNTERS <= 64)
>

ok. I have added those changes but I have modified RISCV_MAX_COUNTERS
to RISCV_KVM_MAX_COUNTERS,
to avoid overlapping with the RISCV_MAX_COUNTERS defined in the host.
Logically, the host and the guest can have separate counters anyways.

> Thanks,
> drew
>
> >
> > > I don't know if there is any benefit of static_assert over #error.
> > > Please let me know if you feel strongly about that.
> >
> > One "normal" line vs. three #-lines?
> >

Fair enough. Fixed.

> > Thanks,
> > drew

-- 
Regards,
Atish