[PATCH] riscv: dts: sophgo: add watchdog dt node for CV1800

[Emil Renner Berthing]

AnnanLiu wrote:
> Add the watchdog device tree node to cv1800 SoC.
> This patch depends on the clk driver and reset driver.
> Clk driver link:
> https://lore.kernel.org/all/IA1PR20MB49539CDAD9A268CBF6CA184BBB9FA@IA1PR20MB4953.namprd20.prod.outlook.com/
> Reset driver link:
> https://lore.kernel.org/all/20231113005503.2423-1-jszhang@kernel.org/
>
> Signed-off-by: AnnanLiu <annan.liu.xdu at outlook.com>
> ---
>  arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts |  4 ++++
>  arch/riscv/boot/dts/sophgo/cv1800b.dtsi          | 15 +++++++++++++++
>  2 files changed, 19 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts b/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts
> index 3af9e34b3bc7..f3103de4a8cc 100644
> --- a/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts
> +++ b/arch/riscv/boot/dts/sophgo/cv1800b-milkv-duo.dts
> @@ -36,3 +36,7 @@ &osc {
>  &uart0 {
>  	status = "okay";
>  };
> +
> +&watchdog0 {
> +	status = "okay";
> +};

You don't set status = "disabled" in the cv1800b.dtsi so you shouldn't need to
enable it explicitly here.

> diff --git a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> index aec6401a467b..a0a6b6fc6bc5 100644
> --- a/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> +++ b/arch/riscv/boot/dts/sophgo/cv1800b.dtsi
> @@ -1,6 +1,7 @@
>  // SPDX-License-Identifier: (GPL-2.0 OR MIT)
>  /*
>   * Copyright (C) 2023 Jisheng Zhang <jszhang at kernel.org>
> + * Copyright (C) 2023 Annan Liu <annan.liu.xdu at outlook.com>
>   */
>
>  #include <dt-bindings/interrupt-controller/irq.h>
> @@ -103,6 +104,20 @@ uart4: serial at 41c0000 {
>  			status = "disabled";
>  		};
>
> +		watchdog0: watchdog at 3010000{
> +			compatible = "snps,dw-wdt";
> +			reg = <0x3010000 0x100>;
> +			interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&pclk>;
> +			resets = <&rst RST_WDT>;
> +		};

Are there more than 1 watchdogs on the SoC? Otherwise there should be no reason
to call this "watchdog0".

> +
> +		pclk: pclk {
> +			#clock-cells = <0>;
> +			compatible = "fixed-clock";
> +			clock-frequency = <25000000>;
> +		};
> +
>  		plic: interrupt-controller at 70000000 {
>  			compatible = "sophgo,cv1800b-plic", "thead,c900-plic";
>  			reg = <0x70000000 0x4000000>;
> --
> 2.34.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv