[PATCH v13 09/21] PCI: microchip: Move setup functions to pcie-plda-host.c

Minda Chen minda.chen at starfivetech.com
Thu Dec 28 01:46:09 PST 2023



On 2023/12/27 23:49, Lorenzo Pieralisi wrote:
> On Thu, Dec 14, 2023 at 03:28:27PM +0800, Minda Chen wrote:
>> Move setup functions to common pcie-plda-host.c. So these two functions
>> can be re-used.
>> 
>> Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
>> Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
>> ---
>>  drivers/pci/controller/plda/Kconfig           |  4 +
>>  drivers/pci/controller/plda/Makefile          |  1 +
>>  .../pci/controller/plda/pcie-microchip-host.c | 59 --------------
>>  drivers/pci/controller/plda/pcie-plda-host.c  | 80 +++++++++++++++++++
>>  drivers/pci/controller/plda/pcie-plda.h       |  5 ++
>>  5 files changed, 90 insertions(+), 59 deletions(-)
>>  create mode 100644 drivers/pci/controller/plda/pcie-plda-host.c
>> 
>> diff --git a/drivers/pci/controller/plda/Kconfig b/drivers/pci/controller/plda/Kconfig
>> index 5cb3be4fc98c..e54a82ee94f5 100644
>> --- a/drivers/pci/controller/plda/Kconfig
>> +++ b/drivers/pci/controller/plda/Kconfig
>> @@ -3,10 +3,14 @@
>>  menu "PLDA-based PCIe controllers"
>>  	depends on PCI
>>  
>> +config PCIE_PLDA_HOST
>> +	bool
>> +
>>  config PCIE_MICROCHIP_HOST
>>  	tristate "Microchip AXI PCIe controller"
>>  	depends on PCI_MSI && OF
>>  	select PCI_HOST_COMMON
>> +	select PCIE_PLDA_HOST
>>  	help
>>  	  Say Y here if you want kernel to support the Microchip AXI PCIe
>>  	  Host Bridge driver.
>> diff --git a/drivers/pci/controller/plda/Makefile b/drivers/pci/controller/plda/Makefile
>> index e1a265cbf91c..4340ab007f44 100644
>> --- a/drivers/pci/controller/plda/Makefile
>> +++ b/drivers/pci/controller/plda/Makefile
>> @@ -1,2 +1,3 @@
>>  # SPDX-License-Identifier: GPL-2.0
>> +obj-$(CONFIG_PCIE_PLDA_HOST) += pcie-plda-host.o
>>  obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
>> diff --git a/drivers/pci/controller/plda/pcie-microchip-host.c b/drivers/pci/controller/plda/pcie-microchip-host.c
>> index 31ca8d44ee2a..2e79bcc7c0a5 100644
>> --- a/drivers/pci/controller/plda/pcie-microchip-host.c
>> +++ b/drivers/pci/controller/plda/pcie-microchip-host.c
>> @@ -838,65 +838,6 @@ static int mc_pcie_init_irq_domains(struct plda_pcie_rp *port)
>>  	return mc_allocate_msi_domains(port);
>>  }
>>  
>> -static void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
>> -				   phys_addr_t axi_addr, phys_addr_t pci_addr,
>> -				   size_t size)
>> -{
>> -	u32 atr_sz = ilog2(size) - 1;
>> -	u32 val;
>> -
>> -	if (index == 0)
>> -		val = PCIE_CONFIG_INTERFACE;
>> -	else
>> -		val = PCIE_TX_RX_INTERFACE;
>> -
>> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> -	       ATR0_AXI4_SLV0_TRSL_PARAM);
>> -
>> -	val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
>> -			    ATR_IMPL_ENABLE;
>> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> -	       ATR0_AXI4_SLV0_SRCADDR_PARAM);
>> -
>> -	val = upper_32_bits(axi_addr);
>> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> -	       ATR0_AXI4_SLV0_SRC_ADDR);
>> -
>> -	val = lower_32_bits(pci_addr);
>> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> -	       ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
>> -
>> -	val = upper_32_bits(pci_addr);
>> -	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> -	       ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
>> -
>> -	val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
>> -	val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
>> -	writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
>> -	writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
>> -}
>> -
>> -static int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
>> -				  struct plda_pcie_rp *port)
>> -{
>> -	void __iomem *bridge_base_addr = port->bridge_addr;
>> -	struct resource_entry *entry;
>> -	u64 pci_addr;
>> -	u32 index = 1;
>> -
>> -	resource_list_for_each_entry(entry, &bridge->windows) {
>> -		if (resource_type(entry->res) == IORESOURCE_MEM) {
>> -			pci_addr = entry->res->start - entry->offset;
>> -			plda_pcie_setup_window(bridge_base_addr, index,
>> -					       entry->res->start, pci_addr,
>> -					       resource_size(entry->res));
>> -			index++;
>> -		}
>> -	}
>> -
>> -	return 0;
>> -}
>> -
>>  static inline void mc_clear_secs(struct mc_pcie *port)
>>  {
>>  	void __iomem *ctrl_base_addr = port->axi_base_addr + MC_PCIE_CTRL_ADDR;
>> diff --git a/drivers/pci/controller/plda/pcie-plda-host.c b/drivers/pci/controller/plda/pcie-plda-host.c
>> new file mode 100644
>> index 000000000000..19131181897f
>> --- /dev/null
>> +++ b/drivers/pci/controller/plda/pcie-plda-host.c
>> @@ -0,0 +1,80 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * PLDA PCIe XpressRich host controller driver
>> + *
>> + * Copyright (C) 2023 Microchip Co. Ltd
>> + *
>> + * Author: Daire McNamara <daire.mcnamara at microchip.com>
>> + */
>> +
>> +#include <linux/irqchip/chained_irq.h>
>> +#include <linux/irqdomain.h>
>> +#include <linux/msi.h>
>> +#include <linux/of_address.h>
>> +#include <linux/of_pci.h>
>> +#include <linux/pci_regs.h>
>> +#include <linux/pci-ecam.h>
>> +#include <linux/platform_device.h>
> 
> Do you really require these headers ? Not in this patch,
> in later patches and that's why every header should be
> added when it is really needed.
> 
> Lorenzo
> 
OK, I will change this. thanks.
>> +
>> +#include "pcie-plda.h"
>> +
>> +void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
>> +			    phys_addr_t axi_addr, phys_addr_t pci_addr,
>> +			    size_t size)
>> +{
>> +	u32 atr_sz = ilog2(size) - 1;
>> +	u32 val;
>> +
>> +	if (index == 0)
>> +		val = PCIE_CONFIG_INTERFACE;
>> +	else
>> +		val = PCIE_TX_RX_INTERFACE;
>> +
>> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> +	       ATR0_AXI4_SLV0_TRSL_PARAM);
>> +
>> +	val = lower_32_bits(axi_addr) | (atr_sz << ATR_SIZE_SHIFT) |
>> +			    ATR_IMPL_ENABLE;
>> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> +	       ATR0_AXI4_SLV0_SRCADDR_PARAM);
>> +
>> +	val = upper_32_bits(axi_addr);
>> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> +	       ATR0_AXI4_SLV0_SRC_ADDR);
>> +
>> +	val = lower_32_bits(pci_addr);
>> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> +	       ATR0_AXI4_SLV0_TRSL_ADDR_LSB);
>> +
>> +	val = upper_32_bits(pci_addr);
>> +	writel(val, bridge_base_addr + (index * ATR_ENTRY_SIZE) +
>> +	       ATR0_AXI4_SLV0_TRSL_ADDR_UDW);
>> +
>> +	val = readl(bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
>> +	val |= (ATR0_PCIE_ATR_SIZE << ATR0_PCIE_ATR_SIZE_SHIFT);
>> +	writel(val, bridge_base_addr + ATR0_PCIE_WIN0_SRCADDR_PARAM);
>> +	writel(0, bridge_base_addr + ATR0_PCIE_WIN0_SRC_ADDR);
>> +}
>> +EXPORT_SYMBOL_GPL(plda_pcie_setup_window);
>> +
>> +int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
>> +			   struct plda_pcie_rp *port)
>> +{
>> +	void __iomem *bridge_base_addr = port->bridge_addr;
>> +	struct resource_entry *entry;
>> +	u64 pci_addr;
>> +	u32 index = 1;
>> +
>> +	resource_list_for_each_entry(entry, &bridge->windows) {
>> +		if (resource_type(entry->res) == IORESOURCE_MEM) {
>> +			pci_addr = entry->res->start - entry->offset;
>> +			plda_pcie_setup_window(bridge_base_addr, index,
>> +					       entry->res->start, pci_addr,
>> +					       resource_size(entry->res));
>> +			index++;
>> +		}
>> +	}
>> +
>> +	return 0;
>> +}
>> +EXPORT_SYMBOL_GPL(plda_pcie_setup_iomems);
>> diff --git a/drivers/pci/controller/plda/pcie-plda.h b/drivers/pci/controller/plda/pcie-plda.h
>> index 363fcbbaf6ec..3deefd35fa5a 100644
>> --- a/drivers/pci/controller/plda/pcie-plda.h
>> +++ b/drivers/pci/controller/plda/pcie-plda.h
>> @@ -120,4 +120,9 @@ struct plda_pcie_rp {
>>  	void __iomem *bridge_addr;
>>  };
>>  
>> +void plda_pcie_setup_window(void __iomem *bridge_base_addr, u32 index,
>> +			    phys_addr_t axi_addr, phys_addr_t pci_addr,
>> +			    size_t size);
>> +int plda_pcie_setup_iomems(struct pci_host_bridge *bridge,
>> +			   struct plda_pcie_rp *port);
>>  #endif
>> -- 
>> 2.17.1
>> 



More information about the linux-riscv mailing list