[PATCH v5 1/4] riscv: dts: starfive: jh7100: Add sysmain and gmac DT nodes
Emil Renner Berthing
emil.renner.berthing at canonical.com
Wed Dec 20 07:33:51 PST 2023
Cristian Ciocaltea wrote:
> On 12/20/23 15:43, Emil Renner Berthing wrote:
> > Cristian Ciocaltea wrote:
> >> Provide the sysmain and gmac DT nodes supporting the DWMAC found on the
> >> StarFive JH7100 SoC.
> >>
> >> Co-developed-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>
> >> Signed-off-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>
> >> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
> >> Reviewed-by: Jacob Keller <jacob.e.keller at intel.com>
> >> ---
> >> arch/riscv/boot/dts/starfive/jh7100.dtsi | 36 ++++++++++++++++++++++++
> >> 1 file changed, 36 insertions(+)
> >>
> >> diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
> >> index c216aaecac53..2ebdebe6a81c 100644
> >> --- a/arch/riscv/boot/dts/starfive/jh7100.dtsi
> >> +++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
> >> @@ -204,6 +204,37 @@ sdio1: mmc at 10010000 {
> >> status = "disabled";
> >> };
> >>
> >> + gmac: ethernet at 10020000 {
> >> + compatible = "starfive,jh7100-dwmac", "snps,dwmac";
> >> + reg = <0x0 0x10020000 0x0 0x10000>;
> >> + clocks = <&clkgen JH7100_CLK_GMAC_ROOT_DIV>,
> >> + <&clkgen JH7100_CLK_GMAC_AHB>,
> >> + <&clkgen JH7100_CLK_GMAC_PTP_REF>,
> >> + <&clkgen JH7100_CLK_GMAC_TX_INV>,
> >> + <&clkgen JH7100_CLK_GMAC_GTX>;
> >> + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "gtx";
> >> + resets = <&rstgen JH7100_RSTN_GMAC_AHB>;
> >> + reset-names = "ahb";
> >> + interrupts = <6>, <7>;
> >> + interrupt-names = "macirq", "eth_wake_irq";
> >> + max-frame-size = <9000>;
> >> + snps,multicast-filter-bins = <32>;
> >> + snps,perfect-filter-entries = <128>;
> >> + starfive,syscon = <&sysmain 0x70 0>;
> >> + rx-fifo-depth = <32768>;
> >> + tx-fifo-depth = <16384>;
> >> + snps,axi-config = <&stmmac_axi_setup>;
> >> + snps,fixed-burst;
> >> + snps,force_thresh_dma_mode;
> >
> > Compared to v4 you're missing a
> >
> > snps,no-pbl-x8;
> >
> > here. It might be the right thing to do, but then I would have expected
> > it to me mentioned in the cover letter version history.
>
> Oh yes, I missed to add this to the changelog, sorry! I dropped that
> because the property is only valid for snps,dwmac-{3.50a, 4.10a, 4.20a,
> 5.20} compatibles, while we have plain snps,dwmac to handle 3.7x.
>
> We could have probably used snps,dwmac-3.70a or snps,dwmac-3.710, but
> I'm not sure which is the exact chip revision and it wouldn't really
> change anything as there is no special handling for them in the
> snps,dwmac.yaml binding.
I see, makes sense. This way works fine for me.
/Emil
More information about the linux-riscv
mailing list