[PATCH v5 1/4] riscv: dts: starfive: jh7100: Add sysmain and gmac DT nodes
Emil Renner Berthing
emil.renner.berthing at canonical.com
Wed Dec 20 05:43:52 PST 2023
Cristian Ciocaltea wrote:
> Provide the sysmain and gmac DT nodes supporting the DWMAC found on the
> StarFive JH7100 SoC.
>
> Co-developed-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>
> Signed-off-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>
> Reviewed-by: Jacob Keller <jacob.e.keller at intel.com>
> ---
> arch/riscv/boot/dts/starfive/jh7100.dtsi | 36 ++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
> index c216aaecac53..2ebdebe6a81c 100644
> --- a/arch/riscv/boot/dts/starfive/jh7100.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
> @@ -204,6 +204,37 @@ sdio1: mmc at 10010000 {
> status = "disabled";
> };
>
> + gmac: ethernet at 10020000 {
> + compatible = "starfive,jh7100-dwmac", "snps,dwmac";
> + reg = <0x0 0x10020000 0x0 0x10000>;
> + clocks = <&clkgen JH7100_CLK_GMAC_ROOT_DIV>,
> + <&clkgen JH7100_CLK_GMAC_AHB>,
> + <&clkgen JH7100_CLK_GMAC_PTP_REF>,
> + <&clkgen JH7100_CLK_GMAC_TX_INV>,
> + <&clkgen JH7100_CLK_GMAC_GTX>;
> + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "gtx";
> + resets = <&rstgen JH7100_RSTN_GMAC_AHB>;
> + reset-names = "ahb";
> + interrupts = <6>, <7>;
> + interrupt-names = "macirq", "eth_wake_irq";
> + max-frame-size = <9000>;
> + snps,multicast-filter-bins = <32>;
> + snps,perfect-filter-entries = <128>;
> + starfive,syscon = <&sysmain 0x70 0>;
> + rx-fifo-depth = <32768>;
> + tx-fifo-depth = <16384>;
> + snps,axi-config = <&stmmac_axi_setup>;
> + snps,fixed-burst;
> + snps,force_thresh_dma_mode;
Compared to v4 you're missing a
snps,no-pbl-x8;
here. It might be the right thing to do, but then I would have expected
it to me mentioned in the cover letter version history.
> + status = "disabled";
> +
> + stmmac_axi_setup: stmmac-axi-config {
> + snps,wr_osr_lmt = <16>;
> + snps,rd_osr_lmt = <16>;
> + snps,blen = <256 128 64 32 0 0 0>;
> + };
> + };
> +
> clkgen: clock-controller at 11800000 {
> compatible = "starfive,jh7100-clkgen";
> reg = <0x0 0x11800000 0x0 0x10000>;
> @@ -218,6 +249,11 @@ rstgen: reset-controller at 11840000 {
> #reset-cells = <1>;
> };
>
> + sysmain: syscon at 11850000 {
> + compatible = "starfive,jh7100-sysmain", "syscon";
> + reg = <0x0 0x11850000 0x0 0x10000>;
> + };
> +
> i2c0: i2c at 118b0000 {
> compatible = "snps,designware-i2c";
> reg = <0x0 0x118b0000 0x0 0x10000>;
> --
> 2.43.0
>
More information about the linux-riscv
mailing list