[PATCH v1 0/8] Add T-Head TH15020 SoC pin control

[Emil Renner Berthing]

This adds a pin control driver for the T-Head TH1520 RISC-V SoC used on
the Lichee Pi 4A and BeagleV Ahead boards and updates the device trees
to make use of it.

It can be easily tested using my th1520 branch at

  https://github.com/esmil/linux.git

..which also adds the MMC, PWM, ethernet and USB drivers that have
been posted but are not upstream yet.

Jisheng: I've added this driver to the generic TH1520 entry in
MAINTAINERS like you did with your USB driver. Let me know if that's not
ok and I'll create a separate entry for this driver with me as
maintainer.

Drew: The last patch is purely based on reading the schematics. It'd be
great if you could give it a spin on real hardware.

/Emil

Emil Renner Berthing (8):
  dt-bindings: pinctrl: Add thead,th1520-pinctrl bindings
  pinctrl: Add driver for the T-Head TH1520 SoC
  riscv: dts: thead: Add TH1520 pin control nodes
  dt-bindings: gpio: dwapb: allow gpio-ranges
  riscv: dts: thead: Add TH1520 GPIO ranges
  riscv: dts: thead: Adjust TH1520 GPIO labels
  riscv: dts: thead: Add TH1520 pinctrl settings for UART0
  riscv: dtb: thead: Add BeagleV Ahead LEDs

 .../bindings/gpio/snps,dw-apb-gpio.yaml       |   2 +
 .../pinctrl/thead,th1520-pinctrl.yaml         | 156 ++++
 MAINTAINERS                                   |   1 +
 .../boot/dts/thead/th1520-beaglev-ahead.dts   |  83 ++
 .../boot/dts/thead/th1520-lichee-pi-4a.dts    |  28 +
 arch/riscv/boot/dts/thead/th1520.dtsi         |  53 +-
 drivers/pinctrl/Kconfig                       |   9 +
 drivers/pinctrl/Makefile                      |   1 +
 drivers/pinctrl/pinctrl-th1520.c              | 796 ++++++++++++++++++
 9 files changed, 1113 insertions(+), 16 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml
 create mode 100644 drivers/pinctrl/pinctrl-th1520.c

-- 
2.40.1