[PATCH v9 2/4] pwm: opencores: Add PWM driver support
William Qiu
william.qiu at starfivetech.com
Fri Dec 15 00:17:27 PST 2023
On 2023/12/13 17:27, William Qiu wrote:
>
>
> On 2023/12/12 1:41, Rob Herring wrote:
>> On Fri, Dec 8, 2023 at 3:42 AM William Qiu <william.qiu at starfivetech.com> wrote:
>>>
>>> Add driver for OpenCores PWM Controller. And add compatibility code
>>> which based on StarFive SoC.
>>>
>>> Co-developed-by: Hal Feng <hal.feng at starfivetech.com>
>>> Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
>>> Signed-off-by: William Qiu <william.qiu at starfivetech.com>
>>> ---
>>> MAINTAINERS | 7 ++
>>> drivers/pwm/Kconfig | 12 ++
>>> drivers/pwm/Makefile | 1 +
>>> drivers/pwm/pwm-ocores.c | 229 +++++++++++++++++++++++++++++++++++++++
>>> 4 files changed, 249 insertions(+)
>>> create mode 100644 drivers/pwm/pwm-ocores.c
>>>
>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>> index 788be9ab5b73..7a11a22da09e 100644
>>> --- a/MAINTAINERS
>>> +++ b/MAINTAINERS
>>> @@ -16204,6 +16204,13 @@ F: Documentation/i2c/busses/i2c-ocores.rst
>>> F: drivers/i2c/busses/i2c-ocores.c
>>> F: include/linux/platform_data/i2c-ocores.h
>>>
>>> +OPENCORES PWM DRIVER
>>> +M: William Qiu <william.qiu at starfivetech.com>
>>> +M: Hal Feng <hal.feng at starfivetech.com>
>>> +S: Supported
>>> +F: Documentation/devicetree/bindings/pwm/opencores,pwm.yaml
>>> +F: drivers/pwm/pwm-ocores.c
>>> +
>>> OPENRISC ARCHITECTURE
>>> M: Jonas Bonn <jonas at southpole.se>
>>> M: Stefan Kristiansson <stefan.kristiansson at saunalahti.fi>
>>> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
>>> index 4b956d661755..d87e1bb350ba 100644
>>> --- a/drivers/pwm/Kconfig
>>> +++ b/drivers/pwm/Kconfig
>>> @@ -444,6 +444,18 @@ config PWM_NTXEC
>>> controller found in certain e-book readers designed by the original
>>> design manufacturer Netronix.
>>>
>>> +config PWM_OCORES
>>> + tristate "OpenCores PWM support"
>>> + depends on HAS_IOMEM && OF
>>> + depends on COMMON_CLK && RESET_CONTROLLER
>>> + depends on ARCH_STARFIVE || COMPILE_TEST
>>> + help
>>> + If you say yes to this option, support will be included for the
>>> + OpenCores PWM. For details see https://opencores.org/projects/ptc.
>>> +
>>> + To compile this driver as a module, choose M here: the module
>>> + will be called pwm-ocores.
>>> +
>>> config PWM_OMAP_DMTIMER
>>> tristate "OMAP Dual-Mode Timer PWM support"
>>> depends on OF
>>> diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
>>> index c5ec9e168ee7..517c4f643058 100644
>>> --- a/drivers/pwm/Makefile
>>> +++ b/drivers/pwm/Makefile
>>> @@ -40,6 +40,7 @@ obj-$(CONFIG_PWM_MICROCHIP_CORE) += pwm-microchip-core.o
>>> obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
>>> obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
>>> obj-$(CONFIG_PWM_NTXEC) += pwm-ntxec.o
>>> +obj-$(CONFIG_PWM_OCORES) += pwm-ocores.o
>>> obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o
>>> obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
>>> obj-$(CONFIG_PWM_PXA) += pwm-pxa.o
>>> diff --git a/drivers/pwm/pwm-ocores.c b/drivers/pwm/pwm-ocores.c
>>> new file mode 100644
>>> index 000000000000..996ca3805901
>>> --- /dev/null
>>> +++ b/drivers/pwm/pwm-ocores.c
>>> @@ -0,0 +1,229 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * OpenCores PWM Driver
>>> + *
>>> + * https://opencores.org/projects/ptc
>>> + *
>>> + * Copyright (C) 2018-2023 StarFive Technology Co., Ltd.
>>> + *
>>> + * Limitations:
>>> + * - The hardware only do inverted polarity.
>>> + * - The hardware minimum period / duty_cycle is (1 / pwm_apb clock frequency) ns.
>>> + * - The hardware maximum period / duty_cycle is (U32_MAX / pwm_apb clock frequency) ns.
>>> + */
>>> +
>>> +#include <linux/clk.h>
>>> +#include <linux/io.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_device.h>
>>
>> You probably don't need this header and the implicit includes it makes
>> are dropped now in linux-next. Please check what you actually need and
>> make them explicit.
>>
>> Rob
> Will drop.
>
> Thank you for spending time on this patchset.
>
> Best Regards
> William
Hi Rob,
After checking, I need to use of_match_device() in of_device.h, so this
interface will be moved to which header in linux-next?
Thanks,
William
More information about the linux-riscv
mailing list