[PATCH v6 3/4] clk: sophgo: Add SG2042 clock generator driver
Stephen Boyd
sboyd at kernel.org
Wed Dec 13 16:15:31 PST 2023
Quoting Conor Dooley (2023-12-12 00:37:39)
> On Tue, Dec 12, 2023 at 10:22:28AM +0800, Chen Wang wrote:
>
> > On 2023/12/9 0:47, Conor Dooley wrote:
> > > On Fri, Dec 08, 2023 at 09:14:32AM +0800, Chen Wang wrote:
>
> > > > +#define ENCODE_PLL_CTRL(fbdiv, p1, p2, refdiv) \
> > > > + (((fbdiv & 0xfff) << 16) | ((p2 & 0x7) << 12) | ((p1 & 0x7) << 8) | (refdiv & 0x3f))
> > > IMO this should be a function not a macro.
>
> > Would like to listen why it should be a function instead of a macro? Any
> > experiences you can share with me?
>
> Readability. A function, which could be inlined allows you to break this
> up and make it easier to read.
>
> > > > +/*
> > > > + * Based on input rate/prate/fbdiv/refdiv, look up the postdiv1_2 table
> > > > + * to get the closest postdiiv combination.
> > > > + * @rate: FOUTPOSTDIV
> > > > + * @prate: parent rate, i.e. FREF
> > > > + * @fbdiv: FBDIV
> > > > + * @refdiv: REFDIV
> > > > + * @postdiv1: POSTDIV1, output
> > > > + * @postdiv2: POSTDIV2, output
> > > > + * See TRM:
> > > > + * FOUTPOSTDIV = FREF * FBDIV / REFDIV / (POSTDIV1 * POSTDIV2)
> > > > + * So we get following formula to get POSTDIV1 and POSTDIV2:
> > > > + * POSTDIV = (prate/REFDIV) x FBDIV/rate
> > > > + * above POSTDIV = POSTDIV1*POSTDIV2
> > > > + */
> > > > +static int __sg2042_pll_get_postdiv_1_2(
> > > > + unsigned long rate,
> > > > + unsigned long prate,
> > > > + unsigned int fbdiv,
> > > > + unsigned int refdiv,
> > > > + unsigned int *postdiv1,
> > > > + unsigned int *postdiv2)
> > > This is not the coding style btw.
> > Agree, will fix this.
> > > > +{
> > > > + int index = 0;
> > > > + int ret = 0;
> > > > + u64 tmp0;
> > > > +
> > > > + /* prate/REFDIV and result save to tmp0 */
> > > > + tmp0 = prate;
> > > > + do_div(tmp0, refdiv);
> > > > +
> > > > + /* ((prate/REFDIV) x FBDIV) and result save to tmp0 */
> > > > + tmp0 *= fbdiv;
> > > > +
> > > > + /* ((prate/REFDIV) x FBDIV)/rate and result save to tmp0 */
> > > > + do_div(tmp0, rate);
> > > > +
> > > > + /* tmp0 is POSTDIV1*POSTDIV2, now we calculate div1 and div2 value */
> > > > + if (tmp0 <= 7) {
> > > > + /* (div1 * div2) <= 7, no need to use array search */
> > > > + *postdiv1 = tmp0;
> > > > + *postdiv2 = 1;
why not return 0 here?
> > > > + } else {
And then de-indent this?
> > > > + /* (div1 * div2) > 7, use array search */
> > > > + for (index = 0; index < ARRAY_SIZE(postdiv1_2); index++) {
> > > > + if (tmp0 > postdiv1_2[index][POSTDIV_RESULT_INDEX]) {
> > > > + continue;
> > > > + } else {
> > > > + /* found it */
> > > > + break;
This can also return?
> > > > + }
> > > > + }
> > > > + if (index < ARRAY_SIZE(postdiv1_2)) {
And this condition can be removed.
> > > > + *postdiv1 = postdiv1_2[index][1];
> > > > + *postdiv2 = postdiv1_2[index][0];
> > > > + } else {
This can be the default after the loop.
> > > > + pr_debug("%s can not find in postdiv array!\n", __func__);
> > > > + ret = -EINVAL;
/* tmp0 is POSTDIV1*POSTDIV2, now we calculate div1 and div2 value */
if (tmp0 <= 7) {
/* (div1 * div2) <= 7, no need to use array search */
*postdiv1 = tmp0;
*postdiv2 = 1;
return 0;
}
/* (div1 * div2) > 7, use array search */
for (index = 0; index < ARRAY_SIZE(postdiv1_2); index++) {
if (tmp0 > postdiv1_2[index][POSTDIV_RESULT_INDEX]) {
continue;
} else {
*postdiv1 = postdiv1_2[index][1];
*postdiv2 = postdiv1_2[index][0];
return 0;
}
}
pr_debug("%s can not find in postdiv array!\n", __func__);
return -EINVAL;
> > > Reading this function it makes me wonder if (and I am far from the best
> > > person to comment, someone like Stephen is vastly more qualified) you
> > > should model this as several "stages", each implemented by the
> > > "standard" clocks - like clk_divider etc. The code here is quite
> > > complicated IMO as it seems to be trying to implement several stages of
> > > division in one go.
> >
> > The objective of __sg2042_pll_get_postdiv_1_2() is straightforward: based on
> > the formula defined by the TRM, with input rate/prate/fbdiv/refdiv, we can
> > get the possiblle combination of POSTDIV1 and POSTDIV2 by looking up the
> > table of postdiv1_2. We will later use it to setup the clock register.
> >
> > Though the codes looks a bit complicated, but accually it is calculate with
> > the formula : POSTDIV = (prate/REFDIV) x FBDIV/rate, I just separate it into
> > several steps to make it easy to understand, I have listed the formula in
> > the comment on top of the function.
>
> I understand what you are doing, I did something similar myself
> previously. My suggestion/question was about using the "standard" types
> of clock that the core provides to represent as many of the clocks in
> this driver as is feasible.
I would not twist the code to conform with the basic clk types. If
possible it would be good to use the helpers for these things, but I
wouldn't split up a clk that is a complex divider with multiple stages
of division into the basic types just to make it fit. I say this because
every clk takes more effort to maintain in the clk tree, it has a name,
pointers, etc. If you can keep that self contained and logically it is
really one clk, then go for it.
More information about the linux-riscv
mailing list