[PATCH RESEND v1 7/7] riscv: dts: microchip: add missing CAN bus clocks

[Conor Dooley]

From: Conor Dooley <conor.dooley at microchip.com>

The CAN controller on PolarFire SoC has an AHB peripheral clock _and_ a
CAN bus clock. The bus clock was omitted when the binding was written,
but is required for operation. Make up for lost time and add to the DT.

Fixes: 38a71fc04895 ("riscv: dts: microchip: add mpfs's CAN controllers")
Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
 arch/riscv/boot/dts/microchip/mpfs.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/boot/dts/microchip/mpfs.dtsi b/arch/riscv/boot/dts/microchip/mpfs.dtsi
index 266489d43912..4d70df0f908c 100644
--- a/arch/riscv/boot/dts/microchip/mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs.dtsi
@@ -416,7 +416,7 @@ i2c1: i2c at 2010b000 {
 		can0: can at 2010c000 {
 			compatible = "microchip,mpfs-can";
 			reg = <0x0 0x2010c000 0x0 0x1000>;
-			clocks = <&clkcfg CLK_CAN0>;
+			clocks = <&clkcfg CLK_CAN0>, <&clkcfg CLK_MSSPLL3>;
 			interrupt-parent = <&plic>;
 			interrupts = <56>;
 			status = "disabled";
@@ -425,7 +425,7 @@ can0: can at 2010c000 {
 		can1: can at 2010d000 {
 			compatible = "microchip,mpfs-can";
 			reg = <0x0 0x2010d000 0x0 0x1000>;
-			clocks = <&clkcfg CLK_CAN1>;
+			clocks = <&clkcfg CLK_CAN1>, <&clkcfg CLK_MSSPLL3>;
 			interrupt-parent = <&plic>;
 			interrupts = <57>;
 			status = "disabled";
-- 
2.39.2