[PATCH] riscv: pgtable: Enhance set_pte to prevent OoO risk

[guoren at kernel.org]

From: Guo Ren <guoren at linux.alibaba.com>

When changing from an invalid pte to a valid one for a kernel page,
there is no need for tlb_flush. It's okay for the TSO memory model, but
there is an OoO risk for the Weak one. eg:

sd t0, (a0) // a0 = pte address, pteval is changed from invalid to valid
...
ld t1, (a1) // a1 = va of above pte

If the ld instruction is executed speculatively before the sd
instruction. Then it would bring an invalid entry into the TLB, and when
the ld instruction retired, a spurious page fault occurred. Because the
vmemmap has been ignored by vmalloc_fault, the spurious page fault would
cause kernel panic.

This patch was inspired by the commit: 7f0b1bf04511 ("arm64: Fix barriers
used for page table modifications"). For RISC-V, there is no requirement
in the spec to guarantee all tlb entries are valid and no requirement to
PTW filter out invalid entries. Of course, micro-arch could give a more
robust design, but here, use a software fence to guarantee.

Signed-off-by: Guo Ren <guoren at linux.alibaba.com>
Signed-off-by: Guo Ren <guoren at kernel.org>
---
 arch/riscv/include/asm/pgtable.h | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index 294044429e8e..2fae5a5438e0 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -511,6 +511,13 @@ static inline int pte_same(pte_t pte_a, pte_t pte_b)
 static inline void set_pte(pte_t *ptep, pte_t pteval)
 {
 	*ptep = pteval;
+
+	/*
+	 * Only if the new pte is present and kernel, otherwise TLB
+	 * maintenance or update_mmu_cache() have the necessary barriers.
+	 */
+	if (pte_val(pteval) & (_PAGE_PRESENT | _PAGE_GLOBAL))
+		RISCV_FENCE(rw,rw);
 }
 
 void flush_icache_pte(pte_t pte);
-- 
2.40.1