[PATCH v3 6/6] riscv: dts: starfive: Add initial StarFive JH8100 device tree
Shengyu Qu
wiagn233 at outlook.com
Fri Dec 8 04:08:59 PST 2023
Hello Sia,
Does the dubhe-80 cores actually support vector? Or vector support
doesn't exist on actual silicon?
Best regards,
Shengyu
> Add initial device tree for the StarFive JH8100 RISC-V SoC.
>
> Signed-off-by: Sia Jee Heng <jeeheng.sia at starfivetech.com>
> Reviewed-by: Ley Foon Tan <leyfoon.tan at starfivetech.com>
> ---
> arch/riscv/boot/dts/starfive/Makefile | 2 +
> arch/riscv/boot/dts/starfive/jh8100-evb.dts | 28 ++
> arch/riscv/boot/dts/starfive/jh8100.dtsi | 378 ++++++++++++++++++++
> 3 files changed, 408 insertions(+)
> create mode 100644 arch/riscv/boot/dts/starfive/jh8100-evb.dts
> create mode 100644 arch/riscv/boot/dts/starfive/jh8100.dtsi
>
> diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
> index 0141504c0f5c..ef5c7331c7ec 100644
> --- a/arch/riscv/boot/dts/starfive/Makefile
> +++ b/arch/riscv/boot/dts/starfive/Makefile
> @@ -10,3 +10,5 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb
>
> dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
> dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
> +
> +dtb-$(CONFIG_ARCH_STARFIVE) += jh8100-evb.dtb
> diff --git a/arch/riscv/boot/dts/starfive/jh8100-evb.dts b/arch/riscv/boot/dts/starfive/jh8100-evb.dts
> new file mode 100644
> index 000000000000..c16bc25d8988
> --- /dev/null
> +++ b/arch/riscv/boot/dts/starfive/jh8100-evb.dts
> @@ -0,0 +1,28 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (c) 2021-2023 StarFive Technology Co., Ltd.
> + */
> +
> +#include "jh8100.dtsi"
> +
> +/ {
> + model = "StarFive JH8100 EVB";
> + compatible = "starfive,jh8100-evb", "starfive,jh8100";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory at 40000000 {
> + device_type = "memory";
> + reg = <0x0 0x40000000 0x2 0x00000000>;
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> diff --git a/arch/riscv/boot/dts/starfive/jh8100.dtsi b/arch/riscv/boot/dts/starfive/jh8100.dtsi
> new file mode 100644
> index 000000000000..f26aff5c1ddf
> --- /dev/null
> +++ b/arch/riscv/boot/dts/starfive/jh8100.dtsi
> @@ -0,0 +1,378 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (c) 2021-2023 StarFive Technology Co., Ltd.
> + */
> +
> +/dts-v1/;
> +
> +/ {
> + compatible = "starfive,jh8100";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + timebase-frequency = <4000000>;
> +
> + cpu0: cpu at 0 {
> + compatible = "starfive,dubhe-80", "riscv";
> + capacity-dmips-mhz = <768>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <512>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <48>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <512>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <48>;
> + mmu-type = "riscv,sv48";
> + next-level-cache = <&l2c0>;
> + reg = <0x0>;
> + riscv,isa = "rv64imafdch";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "h", "zicntr",
> + "zicsr", "zifencei", "zihintpause", "zihpm",
> + "zba", "zbb", "zbs", "sscofpmf";
> + tlb-split;
> +
> + cpu0_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu1: cpu at 1 {
> + compatible = "starfive,dubhe-80", "riscv";
> + capacity-dmips-mhz = <768>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <512>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <48>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <512>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <48>;
> + mmu-type = "riscv,sv48";
> + next-level-cache = <&l2c1>;
> + reg = <0x1>;
> + riscv,isa = "rv64imafdch";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "h", "zicntr",
> + "zicsr", "zifencei", "zihintpause", "zihpm",
> + "zba", "zbb", "zbs", "sscofpmf";
> + tlb-split;
> +
> + cpu1_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu2: cpu at 2 {
> + compatible = "starfive,dubhe-90", "riscv";
> + capacity-dmips-mhz = <1024>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <1024>;
> + d-cache-size = <65536>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <48>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <1024>;
> + i-cache-size = <65536>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <48>;
> + mmu-type = "riscv,sv48";
> + next-level-cache = <&l2c2>;
> + reg = <0x2>;
> + riscv,isa = "rv64imafdch";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "h", "zicntr",
> + "zicsr", "zifencei", "zihintpause", "zihpm",
> + "zba", "zbb", "zbs", "sscofpmf";
> + tlb-split;
> +
> + cpu2_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu3: cpu at 3 {
> + compatible = "starfive,dubhe-90", "riscv";
> + capacity-dmips-mhz = <1024>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <1024>;
> + d-cache-size = <65536>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <48>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <1024>;
> + i-cache-size = <65536>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <48>;
> + mmu-type = "riscv,sv48";
> + next-level-cache = <&l2c2>;
> + reg = <0x3>;
> + riscv,isa = "rv64imafdch";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "h", "zicntr",
> + "zicsr", "zifencei", "zihintpause", "zihpm",
> + "zba", "zbb", "zbs", "sscofpmf";
> + tlb-split;
> +
> + cpu3_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu4: cpu at 4 {
> + compatible = "starfive,dubhe-90", "riscv";
> + capacity-dmips-mhz = <1024>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <1024>;
> + d-cache-size = <65536>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <48>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <1024>;
> + i-cache-size = <65536>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <48>;
> + mmu-type = "riscv,sv48";
> + next-level-cache = <&l2c2>;
> + reg = <0x4>;
> + riscv,isa = "rv64imafdch";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "h", "zicntr",
> + "zicsr", "zifencei", "zihintpause", "zihpm",
> + "zba", "zbb", "zbs", "sscofpmf";
> + tlb-split;
> +
> + cpu4_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu5: cpu at 5 {
> + compatible = "starfive,dubhe-90", "riscv";
> + capacity-dmips-mhz = <1024>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <1024>;
> + d-cache-size = <65536>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <48>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <1024>;
> + i-cache-size = <65536>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <48>;
> + mmu-type = "riscv,sv48";
> + next-level-cache = <&l2c2>;
> + reg = <0x5>;
> + riscv,isa = "rv64imafdch";
> + riscv,isa-base = "rv64i";
> + riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "h", "zicntr",
> + "zicsr", "zifencei", "zihintpause", "zihpm",
> + "zba", "zbb", "zbs", "sscofpmf";
> + tlb-split;
> +
> + cpu5_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&cpu0>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&cpu1>;
> + };
> + };
> +
> + cluster2 {
> + core0 {
> + cpu = <&cpu2>;
> + };
> +
> + core1 {
> + cpu = <&cpu3>;
> + };
> +
> + core2 {
> + cpu = <&cpu4>;
> + };
> +
> + core3 {
> + cpu = <&cpu5>;
> + };
> + };
> + };
> +
> + l2c0: cache-controller-0 {
> + compatible = "cache";
> + cache-block-size = <64>;
> + cache-level = <2>;
> + cache-sets = <512>;
> + cache-size = <0x40000>;
> + cache-unified;
> + next-level-cache = <&l3_cache>;
> + };
> +
> + l2c1: cache-controller-1 {
> + compatible = "cache";
> + cache-block-size = <64>;
> + cache-level = <2>;
> + cache-sets = <512>;
> + cache-size = <0x40000>;
> + cache-unified;
> + next-level-cache = <&l3_cache>;
> + };
> +
> + l2c2: cache-controller-2{
> + compatible = "cache";
> + cache-block-size = <64>;
> + cache-level = <2>;
> + cache-sets = <4096>;
> + cache-size = <0x200000>;
> + cache-unified;
> + next-level-cache = <&l3_cache>;
> + };
> +
> + l3_cache: cache-controller-3 {
> + compatible = "cache";
> + cache-block-size = <64>;
> + cache-level = <3>;
> + cache-sets = <8192>;
> + cache-size = <0x400000>;
> + cache-unified;
> + };
> + };
> +
> + clk_uart: clk-uart {
> + compatible = "fixed-clock"; /* Initial clock handler for UART */
> + #clock-cells = <0>;
> + clock-frequency = <24000000>;
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + interrupt-parent = <&plic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + clint: clint at 2000000 {
> + compatible = "starfive,jh8100-clint", "sifive,clint0";
> + reg = <0x0 0x2000000 0x0 0x10000>;
> + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
> + <&cpu1_intc 3>, <&cpu1_intc 7>,
> + <&cpu2_intc 3>, <&cpu2_intc 7>,
> + <&cpu3_intc 3>, <&cpu3_intc 7>,
> + <&cpu4_intc 3>, <&cpu4_intc 7>,
> + <&cpu5_intc 3>, <&cpu5_intc 7>;
> + };
> +
> + plic: interrupt-controller at c000000 {
> + #interrupt-cells = <1>;
> + #address-cells = <0>;
> + compatible = "starfive,jh8100-plic", "sifive,plic-1.0.0";
> + reg = <0x0 0x0c000000 0x0 0x4000000>;
> + riscv,ndev = <200>;
> + interrupt-controller;
> + interrupts-extended = <&cpu0_intc 11>, <&cpu1_intc 11>,
> + <&cpu0_intc 9>, <&cpu1_intc 9>,
> + <&cpu2_intc 11>, <&cpu3_intc 11>,
> + <&cpu4_intc 11>, <&cpu5_intc 11>,
> + <&cpu2_intc 9>, <&cpu3_intc 9>,
> + <&cpu4_intc 9>, <&cpu5_intc 9>;
> + };
> +
> + uart0: serial at 12160000 {
> + compatible = "starfive,jh8100-uart", "cdns,uart-r1p8";
> + reg = <0x0 0x12160000 0x0 0x10000>;
> + clock-names = "uart_clk", "pclk";
> + clocks = <&clk_uart>, <&clk_uart>;
> + interrupts = <67>;
> + status = "disabled";
> + };
> +
> + uart1: serial at 12170000 {
> + compatible = "starfive,jh8100-uart", "cdns,uart-r1p8";
> + reg = <0x0 0x12170000 0x0 0x10000>;
> + clock-names = "uart_clk", "pclk";
> + clocks = <&clk_uart>, <&clk_uart>;
> + interrupts = <68>;
> + status = "disabled";
> + };
> +
> + uart2: serial at 12180000 {
> + compatible = "starfive,jh8100-uart", "cdns,uart-r1p8";
> + reg = <0x0 0x12180000 0x0 0x10000>;
> + clock-names = "uart_clk", "pclk";
> + clocks = <&clk_uart>, <&clk_uart>;
> + interrupts = <69>;
> + status = "disabled";
> + };
> +
> + uart3: serial at 12190000 {
> + compatible = "starfive,jh8100-uart", "cdns,uart-r1p8";
> + reg = <0x0 0x12190000 0x0 0x10000>;
> + clock-names = "uart_clk", "pclk";
> + clocks = <&clk_uart>, <&clk_uart>;
> + interrupts = <70>;
> + status = "disabled";
> + };
> +
> + uart4: serial at 121a0000 {
> + compatible = "starfive,jh8100-uart", "cdns,uart-r1p8";
> + reg = <0x0 0x121a0000 0x0 0x10000>;
> + clock-names = "uart_clk", "pclk";
> + clocks = <&clk_uart>, <&clk_uart>;
> + interrupts = <71>;
> + status = "disabled";
> + };
> +
> + uart5: serial at 127d0000 {
> + compatible = "starfive,jh8100-uart", "cdns,uart-r1p8";
> + reg = <0x0 0x127d0000 0x0 0x10000>;
> + clock-names = "uart_clk", "pclk";
> + clocks = <&clk_uart>, <&clk_uart>;
> + interrupts = <72>;
> + status = "disabled";
> + };
> +
> + uart6: serial at 127e0000 {
> + compatible = "starfive,jh8100-uart", "cdns,uart-r1p8";
> + reg = <0x0 0x127e0000 0x0 0x10000>;
> + clock-names = "uart_clk", "pclk";
> + clocks = <&clk_uart>, <&clk_uart>;
> + interrupts = <73>;
> + status = "disabled";
> + };
> + };
> +};
More information about the linux-riscv
mailing list