[v3 5/6] drm/vs: Add hdmi driver

Andy Yan andyshrk at 163.com
Thu Dec 7 16:37:32 PST 2023


Hi Keth:






在 2023-12-07 18:48:13,"Keith Zhao" <keith.zhao at starfivetech.com> 写道:
>
>
>On 2023/12/7 17:02, Andy Yan wrote:
>> 
>> 
>> 
>> 
>> Hi Keith:
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> At 2023-12-06 22:11:33, "Keith Zhao" <keith.zhao at starfivetech.com> wrote:
>>>
>>>
>>>On 2023/12/6 20:56, Maxime Ripard wrote:
>>>> On Wed, Dec 06, 2023 at 08:02:55PM +0800, Keith Zhao wrote:
>>>>> >> +static const struct of_device_id starfive_hdmi_dt_ids[] = {
>>>>> >> +	{ .compatible = "starfive,jh7110-inno-hdmi",},
>>>>> > 
>>>>> > So it's inno hdmi, just like Rockchip then?
>>>>> > 
>>>>> > This should be a common driver.
>>>>>
>>>>> Rockchip has a inno hdmi IP. and Starfive has a inno hdmi IP.
>>>>> but the harewawre difference of them is big , it is not easy to use the common driver
>>>>> maybe i need the inno hdmi version here to make a distinction
>>>> 
>>>> I just had a look at the rockchip header file: all the registers but the
>>>> STARFIVE_* ones are identical.
>>>> 
>>>> There's no need to have two identical drivers then, please use the
>>>> rockchip driver instead.
>>>> 
>>>> Maxime
>>>
>>>ok, have a simple test , edid can get . i will continue 
>> 
>> Maybe you can take drivers/gpu/drm/bridge/synopsys/dw-hdmi as a reference, this
>> is also a hdmi ip used by rockchip/meson/sunxi/jz/imx。
>> We finally make it share one driver。
>>>
>hi Andy:
>
>dw_hdmi seems a good choice , it can handle inno hdmi hardware by define its dw_hdmi_plat_data.
>does it means i can write own driver files such as(dw_hdmi-starfive.c) based on dw_hdmi instead of add plat_data in inno_hdmi.c
>

I think the process maybe like this:

1. split the inno_hdmi.c under rockchip to  inno_hdmi.c(the common part), inno_hdmi-rockchip.c(the soc specific part)
2. move the common part inno_hdmi.c to drivers/gpu/drm/bridge/innosilicon/
3. add startfive specific part, inno_hdmi-startfive.c

bellow git log from kernel three show how we convert  dw_hdmi to a common driver: 



12b9f204e804 drm: bridge/dw_hdmi: add rockchip rk3288 support
74af9e4d03b8 dt-bindings: Add documentation for rockchip dw hdmi
d346c14eeea9 drm: bridge/dw_hdmi: add function dw_hdmi_phy_enable_spare
a4d3b8b050d5 drm: bridge/dw_hdmi: clear i2cmphy_stat0 reg in hdmi_phy_wait_i2c_done
632d035bace2 drm: bridge/dw_hdmi: add mode_valid support
0cd9d1428322 drm: bridge/dw_hdmi: add support for multi-byte register width access
cd152393967e dt-bindings: add document for dw_hdmi
b21f4b658df8 drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi
aaa757a092c2 drm: imx: imx-hdmi: split phy configuration to platform driver
3d1b35a3d9f3 drm: imx: imx-hdmi: convert imx-hdmi to drm_bridge mode
c2c3848851a7 drm: imx: imx-hdmi: return defer if can't get ddc i2c adapter
b587833933de drm: imx: imx-hdmi: make checkpatch happy


>Thanks for pointing this out!!!
>
>>>
>>>_______________________________________________
>>>linux-riscv mailing list
>>>linux-riscv at lists.infradead.org
>>>http://lists.infradead.org/mailman/listinfo/linux-riscv
>
>_______________________________________________
>linux-riscv mailing list
>linux-riscv at lists.infradead.org
>http://lists.infradead.org/mailman/listinfo/linux-riscv


More information about the linux-riscv mailing list