[PATCH v3 5/7] kexec_file, ricv: print out debugging message if required

[Conor Dooley]

On Wed, Dec 06, 2023 at 11:37:52PM +0800, Baoquan He wrote:
> On 12/04/23 at 04:14pm, Conor Dooley wrote:
> > On Mon, Dec 04, 2023 at 11:38:05PM +0800, Baoquan He wrote:
> > > On 12/01/23 at 10:38am, Conor Dooley wrote:
> > > > On Thu, Nov 30, 2023 at 10:39:53AM +0800, Baoquan He wrote:
> > > > 
> > > > $subject has a typo in the arch bit :)
> > > 
> > > Indeed, will fix if need report. Thanks for careful checking.
> > > 
> > > > 
> > > > > Replace pr_debug() with the newly added kexec_dprintk() in kexec_file
> > > > > loading related codes.
> > > > 
> > > > Commit messages should be understandable in isolation, but this only
> > > > explains (part of) what is obvious in the diff. Why is this change
> > > > being made?
> > > 
> > > The purpose has been detailedly described in cover letter and patch 1
> > > log. Andrew has picked these patches into his tree and grabbed the cover
> > > letter log into the relevant commit for people's later checking. All
> > > these seven patches will be present in mainline together. This is common
> > > way when posting patch series? Please let me know if I misunderstand
> > > anything.
> > 
> > Each patch having a commit message that explains why a change is being
> > made is the expectation. It is especially useful to explain the why
> > here, since it is not just a mechanical conversion of pr_debug()s as the
> > commit message suggests.
> 
> Sounds reasonable. I rephrase the patch 3 log as below, do you think
> it's OK to you?

Yes, but with one comment.

> 
> I will also adjust patch logs on other ARCH once this one is done.
> Thanks.
> 
> =============================
> Subject: [PATCH v3 5/7] kexec_file, ricv: print out debugging message if required
> 
> Then when specifying '-d' for kexec_file_load interface, loaded
> locations of kernel/initrd/cmdline etc can be printed out to help debug.
> 
> Here replace pr_debug() with the newly added kexec_dprintk() in kexec_file
> loading related codes.
> 

> And also replace pr_notice() with kexec_dprintk() in elf_kexec_load()
> because it's make sense to always print out loaded location of purgatory
> and device tree even though users don't expect the message.

This seems to contradict what you said in your earlier mail, about
moving these from notice to debug. I think you missed a negation in your
new version of the commit message. What you said in response to me seems
like a more complete explanation anyway:
	always printing out the loaded location of purgatory and
	device tree doesn't make sense. It will be confusing when users
	see these even when they do normal kexec/kdump loading.

Thanks,
Conor.

> And also remove kexec_image_info() because the content has been printed
> out in generic code.
> 
> ============================
> 
> > 
> > > > 
> > > > > 
> > > > > And also remove kexec_image_info() because the content has been printed
> > > > > out in generic code.
> > > > > 
> > > > > Signed-off-by: Baoquan He <bhe at redhat.com>
> > > > > ---
> > > > >  arch/riscv/kernel/elf_kexec.c     | 11 ++++++-----
> > > > >  arch/riscv/kernel/machine_kexec.c | 26 --------------------------
> > > > >  2 files changed, 6 insertions(+), 31 deletions(-)
> > > > > 
> > > > > diff --git a/arch/riscv/kernel/elf_kexec.c b/arch/riscv/kernel/elf_kexec.c
> > > > > index e60fbd8660c4..5bd1ec3341fe 100644
> > > > > --- a/arch/riscv/kernel/elf_kexec.c
> > > > > +++ b/arch/riscv/kernel/elf_kexec.c
> > > > > @@ -216,7 +216,6 @@ static void *elf_kexec_load(struct kimage *image, char *kernel_buf,
> > > > >  	if (ret)
> > > > >  		goto out;
> > > > >  	kernel_start = image->start;
> > > > > -	pr_notice("The entry point of kernel at 0x%lx\n", image->start);
> > > > >  
> > > > >  	/* Add the kernel binary to the image */
> > > > >  	ret = riscv_kexec_elf_load(image, &ehdr, &elf_info,
> > > > > @@ -252,8 +251,8 @@ static void *elf_kexec_load(struct kimage *image, char *kernel_buf,
> > > > >  		image->elf_load_addr = kbuf.mem;
> > > > >  		image->elf_headers_sz = headers_sz;
> > > > >  
> > > > > -		pr_debug("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
> > > > > -			 image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
> > > > > +		kexec_dprintk("Loaded elf core header at 0x%lx bufsz=0x%lx memsz=0x%lx\n",
> > > > > +			      image->elf_load_addr, kbuf.bufsz, kbuf.memsz);
> > > > >  
> > > > >  		/* Setup cmdline for kdump kernel case */
> > > > >  		modified_cmdline = setup_kdump_cmdline(image, cmdline,
> > > > > @@ -275,6 +274,8 @@ static void *elf_kexec_load(struct kimage *image, char *kernel_buf,
> > > > >  		pr_err("Error loading purgatory ret=%d\n", ret);
> > > > >  		goto out;
> > > > >  	}
> > > > > +	kexec_dprintk("Loaded purgatory at 0x%lx\n", kbuf.mem);
> > > > > +
> > > > >  	ret = kexec_purgatory_get_set_symbol(image, "riscv_kernel_entry",
> > > > >  					     &kernel_start,
> > > > >  					     sizeof(kernel_start), 0);
> > > > > @@ -293,7 +294,7 @@ static void *elf_kexec_load(struct kimage *image, char *kernel_buf,
> > > > >  		if (ret)
> > > > >  			goto out;
> > > > >  		initrd_pbase = kbuf.mem;
> > > > 
> > > > > -		pr_notice("Loaded initrd at 0x%lx\n", initrd_pbase);
> > > > > +		kexec_dprintk("Loaded initrd at 0x%lx\n", initrd_pbase);
> > > > 
> > > > This is not a pr_debug().
> > > > 
> > > > >  	}
> > > > >  
> > > > >  	/* Add the DTB to the image */
> > > > > @@ -318,7 +319,7 @@ static void *elf_kexec_load(struct kimage *image, char *kernel_buf,
> > > > >  	}
> > > > >  	/* Cache the fdt buffer address for memory cleanup */
> > > > >  	image->arch.fdt = fdt;
> > > > 
> > > > > -	pr_notice("Loaded device tree at 0x%lx\n", kbuf.mem);
> > > > > +	kexec_dprintk("Loaded device tree at 0x%lx\n", kbuf.mem);
> > > > 
> > > > Neither is this. Why are they being moved from pr_notice()?
> > > 
> > > You are right. 
> > > 
> > > While always printing out the loaded location of purgatory and
> > > device tree doesn't make sense. It will be confusing when users
> > > see these even when they do normal kexec/kdump loading. It should be
> > > changed to pr_debug().
> > > 
> > > Which way do you suggest?
> > > 1) change it back to pr_debug(), fix it in another patch;
> > > 2) keep it as is in the patch;
> > 
> > Personally I think it is fine to change them all in one patch, but the
> > rationale for converting pr_notice() to your new debug infrastructure
> > needs to be in the commit message.
> 
> Sure, sounds good to me. I have changed the patch log to reflect this as
> you suggested, please help check. Thanks again.
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20231206/69e66116/attachment.sig>