[v3 1/6] dt-bindings: display: Add yamls for JH7110 display system
Sui Jingfeng
sui.jingfeng at linux.dev
Wed Dec 6 04:50:29 PST 2023
Hi,
On 2023/12/4 20:33, Keith Zhao wrote:
> StarFive SoCs JH7110 display system:
> dc controller, hdmi controller,
> encoder, vout syscon.
>
> add the path of yaml file in MAINTAINERS
>
> Signed-off-by: Keith Zhao <keith.zhao at starfivetech.com>
> ---
> .../starfive/starfive,display-subsystem.yaml | 104 ++++++++++++++++
> .../starfive/starfive,dsi-encoder.yaml | 92 ++++++++++++++
> .../starfive/starfive,jh7110-dc8200.yaml | 113 ++++++++++++++++++
> .../starfive/starfive,jh7110-inno-hdmi.yaml | 82 +++++++++++++
> .../soc/starfive/starfive,jh7110-syscon.yaml | 1 +
> MAINTAINERS | 7 ++
> 6 files changed, 399 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml
> create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml
> create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
> create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml
> new file mode 100644
> index 000000000000..d5ebdba3fb36
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/starfive/starfive,display-subsystem.yaml
> @@ -0,0 +1,104 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/starfive/starfive,display-subsystem.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Starfive JH7110 Soc Display SubSystem
> +
> +maintainers:
> + - Keith Zhao <keith.zhao at starfivetech.com>
> + - ShengYang Chen <shengyang.chen at starfivetech.com>
> +
> +description:
> + This is the bindings documentation for the JH7110 Soc Display Subsystem that
> + includes front-end video data capture, display controller and display
> + interface. such as HDMI and MIPI.
> +
> + JH7110 display pipeline have several components as below description,
> + multi display controllers and corresponding physical interfaces.
> + For different display scenarios, pipe0 and pipe1 maybe binding to different
> + encoder. for example,
> +
> + pipe0 binding to HDMI for primary display,
> + pipe1 binding to DSI for external display.
> +
> + +------------------------------+
> + | |
> + | |
> + +----+ | +-------------------+ | +-------+ +------+ +------+
> + | +----->+ dc controller 0 +--->----->+HDMICtl| ->+ PHY +-->+PANEL0+
> + |AXI | | +-------------------+ | +-------+ +------+ +------+
> + | | | |
> + | | | |
> + | | | |
> + | | | |
> + |APB | | +-------------------+ +---------+ +------+ +-------+
> + | +----->+ dc controller 1 +--->---->+ dsiTx +--->+DPHY +->+ PANEL1+
> + | | | +-------------------+ +---------+ +------+ +-------+
> + +----+ | |
> + +------------------------------+
> +
> +
> +properties:
> + compatible:
> + const: starfive,display-subsystem
> +
> + clocks:
> + items:
> + - description: Clock for display system noc bus.
> + - description: Core clock for display controller.
> + - description: Clock for axi bus to access ddr.
> + - description: Clock for ahb bus to R/W the phy regs.
> +
> + clock-names:
> + items:
> + - const: noc_bus
> + - const: dc_core
> + - const: axi_core
> + - const: ahb
> +
> + resets:
> + items:
> + - description: Reset for axi bus.
> + - description: Reset for ahb bus.
> + - description: Core reset of display controller.
> +
> + reset-names:
> + items:
> + - const: axi
> + - const: ahb
> + - const: core
> +
> + ports:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + items:
> + maxItems: 1
> + description:
> + Should contain a list of phandles pointing to display interface port
> + of dc-controller devices.
> +
> +required:
> + - compatible
> + - clocks
> + - clock-names
> + - resets
> + - reset-names
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + display-subsystem {
> + compatible = "starfive,display-subsystem";
> + ports = <&dc_out>;
> +
> + clocks = <&syscrg 60>,
> + <&voutcrg 4>,
> + <&voutcrg 5>,
> + <&voutcrg 6>;
> + clock-names = "noc_bus", "dc_core", "axi_core", "ahb";
> + resets = <&voutcrg 0>, <&voutcrg 1>, <&voutcrg 2>;
> + reset-names = "axi", "ahb", "core";
> + };
> diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml
> new file mode 100644
> index 000000000000..2cc0ad8e65ba
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml
> @@ -0,0 +1,92 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/starfive/starfive,dsi-encoder.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: starfive jh7110 soc Encoder
> +
> +maintainers:
> + - Keith Zhao <keith.zhao at starfivetech.com>
> +
> +description:
> + Device-Tree bindings for simple encoder.
> + Simple encoder driver only has basic functionality.
> + the hardware of dc8200 has 2 output interface, use
> + syscon to select which one to be used.
> +
> +properties:
> + compatible:
> + const: starfive,dsi-encoder
> +
> + starfive,syscon:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + items:
> + - items:
> + - description: phandle to syscon that select crtc output.
> + - description: Offset of crtc selection
> + - description: Shift of crtc selection
> + description:
> + A phandle to syscon with two arguments that configure select output.
> + The argument one is the offset of crtc selection, the
> + argument two is the shift of crtc selection.
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port at 0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + The first port should be the input coming from the associated dc channel.
> +
> + port at 1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + The second port should be the output coming from the associated bridge.
> +
> + required:
> + - port at 0
> + - port at 1
> +
> +required:
> + - compatible
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + dssctrl: dssctrl at 295b0000 {
> + compatible = "starfive,jh7110-vout-syscon", "syscon";
> + reg = <0x295b0000 0x90>;
> + };
> +
> + dsi_encoder: dsi_encoder {
> + compatible = "starfive,dsi-encoder";
> + starfive,syscon = <&dssctrl 0x8 0x12>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + /* input */
> + port at 0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0>;
> + dsi_input0:endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&dc_out_dpi1>;
> + };
> + };
> + /* output */
> + port at 1 {
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + dsi_out:endpoint {
> + remote-endpoint = <&mipi_in>;
> + };
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
> new file mode 100644
> index 000000000000..0b083effec02
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
> @@ -0,0 +1,113 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-dc8200.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive display controller
> +
> +description:
> + The StarFive SoC uses the display controller based on Verisilicon IP
> + to transfer the image data from a video memory buffer to an external
> + LCD interface.
> +
> +maintainers:
> + - Keith Zhao <keith.zhao at starfivetech.com>
> +
> +properties:
> + compatible:
> + const: starfive,jh7110-dc8200
> +
> + reg:
> + minItems: 1
> + items:
> + - description:
> + host interface
> + - description:
> + display physical base address and length.
> +
> + interrupts:
> + items:
> + - description: The interrupt will be generated when DC finish one frame
> +
> + clocks:
> + items:
> + - description: Pixel clock for display channel 0.
> + - description: Pixel clock for display channel 1.
> + - description: Pixel clock from hdmi.
> + - description: Pixel clock for soc .
> + clock-names:
> + items:
> + - const: channel0
> + - const: channel1
> + - const: hdmi_tx
> + - const: dc_parent
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + properties:
> + port at 0:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + channel 0 output
> +
> + port at 1:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + channel 1 output
> +
> + required:
> + - port at 0
> + - port at 1
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + dc8200: lcd-controller at 29400000 {
> + compatible = "starfive,jh7110-dc8200";
> + reg = <0x29400000 0x100>, <0x29400800 0x2000>;
> + interrupts = <95>;
> + clocks = <&voutcrg 7>,
> + <&voutcrg 8>,
> + <&voutcrg 9>,
> + <&voutcrg 10>;
> + clock-names = "channel0", "channel1","hdmi_tx", "dc_parent";
> +
> + crtc_out: ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + dc_out0: port at 0 {
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + dc_out_dpi0: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&hdmi_in_dc>;
> + };
> +
> + };
> +
> + dc_out1: port at 1 {
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + dc_out_dpi1: endpoint at 1 {
> + reg = <1>;
> + remote-endpoint = <&dsi_input0>;
> + };
> +
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
> new file mode 100644
> index 000000000000..3640d97ab789
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
> @@ -0,0 +1,82 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-inno-hdmi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Starfive JH7110 HDMI controller
> +
> +description:
> + The StarFive JH7110 SoC uses the HDMI signal transmiter based on innosilicon IP
'transmiter' -> 'transmitter'
> + to generate HDMI signal from its input and transmit the signal to the screen.
> +
> +maintainers:
> + - Keith Zhao <keith.zhao at starfivetech.com>
> +
> +properties:
> + compatible:
> + const: "starfive,jh7110-inno-hdmi"
> +
> + reg:
> + minItems: 1
> +
> + interrupts:
> + items:
> + - description: The HDMI hot plug detection interrupt.
> +
> + clocks:
> + items:
> + - description: System clock of HDMI module.
> + - description: Mclk clock of HDMI audio.
> + - description: Bclk clock of HDMI audio.
> +
> + clock-names:
> + items:
> + - const: sysclk
> + - const: mclk
> + - const: bclk
> +
> + resets:
> + maxItems: 1
> +
> + '#sound-dai-cells':
> + const: 0
> +
> + port:
> + $ref: /schemas/graph.yaml#/properties/port
> + description:
> + Should contain a remote endpoint phandle of display controller device.
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - clocks
> + - clock-names
> + - resets
> + - '#sound-dai-cells'
> + - port
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + hdmi: hdmi at 29590000 {
> + compatible = "starfive,jh7110-inno-hdmi";
> + reg = <0x29590000 0x4000>;
> + interrupts = <99>;
> + clocks = <&voutcrg 17>,
> + <&voutcrg 15>,
> + <&voutcrg 16>;
> + clock-names = "sysclk", "mclk","bclk";
> + resets = <&voutcrg 9>;
> + #sound-dai-cells = <0>;
> + hdmi_in: port {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + hdmi_in_dc: endpoint at 0 {
> + reg = <0>;
> + remote-endpoint = <&dc_out_hdmi>;
> + };
> + };
> + };
> diff --git a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
> index 0039319e91fe..cf9b657d0e8a 100644
> --- a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
> +++ b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
> @@ -24,6 +24,7 @@ properties:
> - enum:
> - starfive,jh7110-aon-syscon
> - starfive,jh7110-stg-syscon
> + - starfive,jh7110-vout-syscon
> - const: syscon
>
> reg:
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7b151710e8c5..7caaadb83f3f 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6881,6 +6881,13 @@ T: git git://anongit.freedesktop.org/drm/drm-misc
> F: Documentation/devicetree/bindings/display/ste,mcde.yaml
> F: drivers/gpu/drm/mcde/
>
> +DRM DRIVERS FOR STARFIVE
> +M: Keith Zhao <keith.zhao at starfivetech.com>
> +L: dri-devel at lists.freedesktop.org
> +S: Maintained
> +T: git git://anongit.freedesktop.org/drm/drm-misc
> +F: Documentation/devicetree/bindings/display/starfive/
> +
> DRM DRIVER FOR TI DLPC3433 MIPI DSI TO DMD BRIDGE
> M: Jagan Teki <jagan at amarulasolutions.com>
> S: Maintained
More information about the linux-riscv
mailing list