[PATCH v11 19/20] PCI: starfive: Add JH7110 PCIe controller

Minda Chen minda.chen at starfivetech.com
Sun Dec 3 22:03:35 PST 2023



On 2023/12/2 22:44, Emil Renner Berthing wrote:
> Minda Chen wrote:
>> Add StarFive JH7110 SoC PCIe controller platform driver codes, JH7110
>> with PLDA host PCIe core.
>>
>> Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
>> Co-developed-by: Kevin Xie <kevin.xie at starfivetech.com>
>> Reviewed-by: Mason Huo <mason.huo at starfivetech.com>
>> ---
>>  MAINTAINERS                                 |   7 +
>>  drivers/pci/controller/plda/Kconfig         |  11 +
>>  drivers/pci/controller/plda/Makefile        |   1 +
>>  drivers/pci/controller/plda/pcie-plda.h     |  71 ++-
>>  drivers/pci/controller/plda/pcie-starfive.c | 460 ++++++++++++++++++++
>>  drivers/pci/pci.h                           |   7 +
>>  6 files changed, 556 insertions(+), 1 deletion(-)
>>  create mode 100644 drivers/pci/controller/plda/pcie-starfive.c
>>
> 
> ...
> 
>> +
>> +static int starfive_pcie_parse_dt(struct starfive_jh7110_pcie *pcie,
>> +				  struct device *dev)
>> +{
>> +	int domain_nr;
>> +
>> +	pcie->num_clks = devm_clk_bulk_get_all(dev, &pcie->clks);
>> +	if (pcie->num_clks < 0)
>> +		return dev_err_probe(dev, -ENODEV,
>> +				     "failed to get pcie clocks\n");
> 
> Hi Minda,
> 
> From Damian's mail I noticed that this should propagate the error from
> devm_clk_bulk_get_all() properly, so -EPROBE is converted to an -ENODEV error.
> Eg.
> 
> 	if (pcie->num_clks < 0)
> 		return dev_err_probe(dev, pcie->num_clks,
> 				     "failed to get pcie clocks\n");
> 
Thanks. I will change it in next version.

>> +
>> +	pcie->resets = devm_reset_control_array_get_exclusive(dev);
>> +	if (IS_ERR(pcie->resets))
>> +		return dev_err_probe(dev, PTR_ERR(pcie->resets),
>> +				     "failed to get pcie resets");
>> +
>> +	pcie->reg_syscon =
>> +		syscon_regmap_lookup_by_phandle(dev->of_node,
>> +						"starfive,stg-syscon");
>> +
>> +	if (IS_ERR(pcie->reg_syscon))
>> +		return dev_err_probe(dev, PTR_ERR(pcie->reg_syscon),
>> +				     "failed to parse starfive,stg-syscon\n");
>> +
>> +	pcie->phy = devm_phy_optional_get(dev, NULL);
>> +	if (IS_ERR(pcie->phy))
>> +		return dev_err_probe(dev, PTR_ERR(pcie->phy),
>> +				     "failed to get pcie phy\n");
>> +
>> +	domain_nr = of_get_pci_domain_nr(dev->of_node);
>> +
>> +	if (domain_nr < 0 || domain_nr > 1)
>> +		return dev_err_probe(dev, -ENODEV,
>> +				     "failed to get valid pcie domain\n");
>> +
>> +	if (domain_nr == 0)
>> +		pcie->stg_pcie_base = STG_SYSCON_PCIE0_BASE;
>> +	else
>> +		pcie->stg_pcie_base = STG_SYSCON_PCIE1_BASE;
>> +
>> +	pcie->reset_gpio = devm_gpiod_get_optional(dev, "perst",
>> +						   GPIOD_OUT_HIGH);
>> +	if (IS_ERR(pcie->reset_gpio))
>> +		return dev_err_probe(dev, PTR_ERR(pcie->reset_gpio),
>> +				     "failed to get perst-gpio\n");
>> +
>> +	pcie->power_gpio = devm_gpiod_get_optional(dev, "enable",
>> +						   GPIOD_OUT_LOW);
>> +	if (IS_ERR(pcie->power_gpio))
>> +		return dev_err_probe(dev, PTR_ERR(pcie->power_gpio),
>> +				     "failed to get power-gpio\n");
>> +
>> +	return 0;
>> +}



More information about the linux-riscv mailing list