[-next v2 2/2] riscv: dts: starfive: visionfive 2: Fix uart0 pins sort order

[Hal Feng]

Node uart0_pins should be sorted alphabetically.

Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
---
 .../jh7110-starfive-visionfive-2.dtsi         | 48 +++++++++----------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index 85f40df93f25..382dfb5e64e4 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -440,30 +440,6 @@ GPOEN_ENABLE,
 		};
 	};
 
-	uart0_pins: uart0-0 {
-		tx-pins {
-			pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
-					     GPOEN_ENABLE,
-					     GPI_NONE)>;
-			bias-disable;
-			drive-strength = <12>;
-			input-disable;
-			input-schmitt-disable;
-			slew-rate = <0>;
-		};
-
-		rx-pins {
-			pinmux = <GPIOMUX(6, GPOUT_LOW,
-					     GPOEN_DISABLE,
-					     GPI_SYS_UART0_RX)>;
-			bias-disable; /* external pull-up */
-			drive-strength = <2>;
-			input-enable;
-			input-schmitt-enable;
-			slew-rate = <0>;
-		};
-	};
-
 	tdm_pins: tdm-0 {
 		tx-pins {
 			pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
@@ -497,6 +473,30 @@ GPOEN_DISABLE,
 			input-enable;
 		};
 	};
+
+	uart0_pins: uart0-0 {
+		tx-pins {
+			pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
+					     GPOEN_ENABLE,
+					     GPI_NONE)>;
+			bias-disable;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		rx-pins {
+			pinmux = <GPIOMUX(6, GPOUT_LOW,
+					     GPOEN_DISABLE,
+					     GPI_SYS_UART0_RX)>;
+			bias-disable; /* external pull-up */
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+	};
 };
 
 &tdm {
-- 
2.38.1