[PATCH] Documentation/llvm: refresh docs
Nathan Chancellor
nathan at kernel.org
Thu Aug 24 11:49:10 PDT 2023
On Thu, Aug 24, 2023 at 11:03:17AM -0700, ndesaulniers at google.com wrote:
> Recent fixes for an embargoed hardware security vulnerability failed to
> link with ld.lld (LLVM's linker). [0] To be fair, our documentation
> mentions ``CC=clang`` foremost with ``LLVM=1`` being buried "below the
> fold."
>
> We want to encourage the use of ``LLVM=1`` rather than just
> ``CC=clang``. Make that sugguestion "above the fold" and "front and
> center" in our docs.
>
> While here, the following additional changes were made:
> - remove the bit about CROSS_COMPILE setting --target=, that's no longer
> true.
> - Add ARCH=loongarch to the list of maintained targets (though we're
> still working on getting defconfig building cleanly at the moment;
> we're pretty close).
> - Promote ARCH=riscv from being Maintained to being Supported. Android
> is working towards supporting RISC-V, and we have excellent support
> from multiple companies in this regard.
> - Note that the toolchain distribution on kernel.org has been built with
> profile data from kernel builds.
>
> Link: https://github.com/ClangBuiltLinux/linux/issues/1907 [0]
> ---
>
>
> Signed-off-by: Nick Desaulniers <ndesaulniers at google.com>
Nit: Your signed-off-by ended up below the fold, was it in your cover
letter commit rather than your actual commit?
Aside from the relatively minor comments below, this looks like a really
good improvement to the documentation to me. It feels like it is more
targeting users or non-kbuild folks now, which I think is great.
I trust you to address my comments as you see fit, so please carry
forward:
Reviewed-by: Nathan Chancellor <nathan at kernel.org>
> ---
> Documentation/kbuild/llvm.rst | 102 +++++++++++++++++++++++-------------------
> 1 file changed, 55 insertions(+), 47 deletions(-)
>
> diff --git a/Documentation/kbuild/llvm.rst b/Documentation/kbuild/llvm.rst
> index c3851fe1900d..00b26a0a6bf1 100644
> --- a/Documentation/kbuild/llvm.rst
> +++ b/Documentation/kbuild/llvm.rst
> @@ -25,50 +25,38 @@ objects <https://www.aosabook.org/en/llvm.html>`_. Clang is a front-end to LLVM
> that supports C and the GNU C extensions required by the kernel, and is
> pronounced "klang," not "see-lang."
>
> -Clang
> ------
> -
> -The compiler used can be swapped out via ``CC=`` command line argument to ``make``.
> -``CC=`` should be set when selecting a config and during a build. ::
> -
> - make CC=clang defconfig
> +Building with LLVM
> +------------------
>
> - make CC=clang
> -
> -Cross Compiling
> ----------------
> +Invoke ``make`` via::
>
> -A single Clang compiler binary will typically contain all supported backends,
> -which can help simplify cross compiling. ::
> -
> - make ARCH=arm64 CC=clang CROSS_COMPILE=aarch64-linux-gnu-
> + make LLVM=1
>
> -``CROSS_COMPILE`` is not used to prefix the Clang compiler binary, instead
> -``CROSS_COMPILE`` is used to set a command line flag: ``--target=<triple>``. For
> -example: ::
> +to compile for the host target. For cross compiling::
>
> - clang --target=aarch64-linux-gnu foo.c
> + make LLVM=1 ARCH=arm64
>
> -LLVM Utilities
> +The LLVM= argument
> --------------
I see a few new kernel-doc warnings from not adjusting the underlines to
match the new length of the title:
Documentation/kbuild/llvm.rst:40: WARNING: Title underline too short.
The LLVM= argument
--------------
Documentation/kbuild/llvm.rst:40: WARNING: Title underline too short.
The LLVM= argument
--------------
Documentation/kbuild/llvm.rst:102: WARNING: Title underline too short.
The LLVM_IAS= argument
-----------------
Documentation/kbuild/llvm.rst:102: WARNING: Title underline too short.
The LLVM_IAS= argument
-----------------
>
> -LLVM has substitutes for GNU binutils utilities. They can be enabled individually.
> -The full list of supported make variables::
> +LLVM has substitutes for GNU binutils utilities. They can be enabled
> +individually. The full list of supported make variables::
>
> make CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm STRIP=llvm-strip \
> OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump READELF=llvm-readelf \
> HOSTCC=clang HOSTCXX=clang++ HOSTAR=llvm-ar HOSTLD=ld.lld
>
> -To simplify the above command, Kbuild supports the ``LLVM`` variable::
> -
> - make LLVM=1
> +``LLVM=1`` expands to the above.
>
> If your LLVM tools are not available in your PATH, you can supply their
> location using the LLVM variable with a trailing slash::
>
> make LLVM=/path/to/llvm/
>
> -which will use ``/path/to/llvm/clang``, ``/path/to/llvm/ld.lld``, etc.
> +which will use ``/path/to/llvm/clang``, ``/path/to/llvm/ld.lld``, etc. The
> +following may also be used::
> +
> + PATH=/path/to/llvm:$PATH make LLVM=1
>
> If your LLVM tools have a version suffix and you want to test with that
> explicit version rather than the unsuffixed executables like ``LLVM=1``, you
> @@ -78,31 +66,46 @@ can pass the suffix using the ``LLVM`` variable::
>
> which will use ``clang-14``, ``ld.lld-14``, etc.
>
> -``LLVM=0`` is not the same as omitting ``LLVM`` altogether, it will behave like
> -``LLVM=1``. If you only wish to use certain LLVM utilities, use their respective
> -make variables.
> +To support combinations of out of tree paths with version suffixes, we
> +recommend::
> +
> + PATH=/path/to/llvm/:$PATH make LLVM=-14
>
> -The integrated assembler is enabled by default. You can pass ``LLVM_IAS=0`` to
> -disable it.
> +``LLVM=0`` is not the same as omitting ``LLVM`` altogether, it will behave like
> +``LLVM=1``. If you only wish to use certain LLVM utilities, use their
> +respective make variables.
>
> -Omitting CROSS_COMPILE
> -----------------------
> +The same value used for ``LLVM=`` should be set for each invocation of ``make``
> +if configuring and building via distinct commands. ``LLVM=`` should also be set
> +as an environment variable when running scripts that will eventually run
> +``make``.
>
> -As explained above, ``CROSS_COMPILE`` is used to set ``--target=<triple>``.
> +Cross Compiling
> +---------------
>
> -If ``CROSS_COMPILE`` is not specified, the ``--target=<triple>`` is inferred
> -from ``ARCH``.
> +A single Clang compiler binary (and corresponding LLVM utilities) will
> +typically contain all supported backends, which can help simplify cross
> +compiling especially when ``LLVM=1`` is used. If you use only LLVM tools,
> +``CROSS_COMPILE`` becomes unnecessary.
>
> -That means if you use only LLVM tools, ``CROSS_COMPILE`` becomes unnecessary.
> +As an example, for a target like ``ARCH=s390`` which does not yet have
> +``ld.lld`` support, you could invoke ``make`` via::
>
> -For example, to cross-compile the arm64 kernel::
> + make LLVM=1 LD=ld.bfd CROSS_COMPILE=s390x-linux-gnu-
This should probably have ARCH=s390?
> - make ARCH=arm64 LLVM=1
> +``CROSS_COMPILE`` is not used to prefix the Clang compiler binary (or
> +corresponding LLVM utilities), but it will be for any GNU toolchain utilities.
> +This example will invoke ``s390x-linux-gnu-ld.bfd`` as the linker, so ensure
> +that is reachable in your ``$PATH``.
I like the example as I feel like it addresses some of the fear I have had
around recommending LLVM=1 as the initial build suggestion but 'LLVM=1
LD=ld.bfd CROSS_COMPILE=s390x-linux-gnu-' does not compose as you describe here
because $(LD) is not prefixed with $(CROSS_COMPILE) anywhere in Makefile. The
non-$(LLVM) default assignment of $(LD) is '$(CROSS_COMPILE)ld' and that is
overridden by 'LD=ld.bfd' on the command line.
In other words, this should be
make ARCH=s390 LLVM=1 LD=s390x-linux-gnu-ld.bfd
and have the note about CROSS_COMPILE prefixing any GNU toolchain utilities
removed. It should problably have OBJCOPY and OBJDUMP too, as those are
required due to https://github.com/ClangBuiltLinux/linux/issues/859 and
https://github.com/ClangBuiltLinux/linux/issues/1530.
> -If ``LLVM_IAS=0`` is specified, ``CROSS_COMPILE`` is also used to derive
> -``--prefix=<path>`` to search for the GNU assembler and linker. ::
> +The LLVM_IAS= argument
> +-----------------
>
> - make ARCH=arm64 LLVM=1 LLVM_IAS=0 CROSS_COMPILE=aarch64-linux-gnu-
> +Clang can assemble assembler code. You can pass ``LLVM_IAS=0`` to disable this
> +behavior and have Clang invoke the system assembler instead (or the assembler
> +based on ``CROSS_COMPILE``). ``CROSS_COMPILE`` is necessary when ``LLVM_IAS=0``
> +is set when cross compiling in order to set ``--prefix=`` for the compiler to
> +find the corresponding non-integrated assembler.
Thanks a lot for documenting this behavior, it is one of the most common
issues I run into myself (adding LLVM_IAS=0 without CROSS_COMPILE) and
maybe this note will be what I need in order to remember :)
> Supported Architectures
> -----------------------
> @@ -135,14 +138,17 @@ yet. Bug reports are always welcome at the issue tracker below!
> * - hexagon
> - Maintained
> - ``LLVM=1``
> + * - loongarch
> + - Maintained
> + - ``LLVM=1``
> * - mips
> - Maintained
> - ``LLVM=1``
> * - powerpc
> - Maintained
> - - ``CC=clang``
> + - ``LLVM=1``
> * - riscv
> - - Maintained
> + - Supported
> - ``LLVM=1``
> * - s390
> - Maintained
> @@ -171,9 +177,11 @@ Getting Help
> Getting LLVM
> -------------
>
> -We provide prebuilt stable versions of LLVM on `kernel.org <https://kernel.org/pub/tools/llvm/>`_.
> -Below are links that may be useful for building LLVM from source or procuring
> -it through a distribution's package manager.
> +We provide prebuilt stable versions of LLVM on `kernel.org
> +<https://kernel.org/pub/tools/llvm/>`_. These have been optimized with profile
> +data for building Linux kernels. Below are links that may be useful for
Maybe make a note of why this matters? ", which should lower kernel
build times compared to non-optimized LLVM toolchains."?
Cheers,
Nathan
More information about the linux-riscv
mailing list