[PATCH -next v2 08/25] spi: spi-cadence: Use helper function devm_clk_get_enabled()

Li Zetao lizetao1 at huawei.com
Wed Aug 23 06:39:21 PDT 2023


Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
replaced by devm_clk_get_enabled() when driver enables (and possibly
prepares) the clocks for the whole lifetime of the device. Moreover, it is
no longer necessary to unprepare and disable the clocks explicitly.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron at huawei.com>
Signed-off-by: Li Zetao <lizetao1 at huawei.com>
---
v1 -> v2: None

 drivers/spi/spi-cadence.c | 23 +++--------------------
 1 file changed, 3 insertions(+), 20 deletions(-)

diff --git a/drivers/spi/spi-cadence.c b/drivers/spi/spi-cadence.c
index 12c940ba074a..1f2f8c717df6 100644
--- a/drivers/spi/spi-cadence.c
+++ b/drivers/spi/spi-cadence.c
@@ -581,31 +581,19 @@ static int cdns_spi_probe(struct platform_device *pdev)
 		goto remove_ctlr;
 	}
 
-	xspi->pclk = devm_clk_get(&pdev->dev, "pclk");
+	xspi->pclk = devm_clk_get_enabled(&pdev->dev, "pclk");
 	if (IS_ERR(xspi->pclk)) {
 		dev_err(&pdev->dev, "pclk clock not found.\n");
 		ret = PTR_ERR(xspi->pclk);
 		goto remove_ctlr;
 	}
 
-	ret = clk_prepare_enable(xspi->pclk);
-	if (ret) {
-		dev_err(&pdev->dev, "Unable to enable APB clock.\n");
-		goto remove_ctlr;
-	}
-
 	if (!spi_controller_is_target(ctlr)) {
-		xspi->ref_clk = devm_clk_get(&pdev->dev, "ref_clk");
+		xspi->ref_clk = devm_clk_get_enabled(&pdev->dev, "ref_clk");
 		if (IS_ERR(xspi->ref_clk)) {
 			dev_err(&pdev->dev, "ref_clk clock not found.\n");
 			ret = PTR_ERR(xspi->ref_clk);
-			goto clk_dis_apb;
-		}
-
-		ret = clk_prepare_enable(xspi->ref_clk);
-		if (ret) {
-			dev_err(&pdev->dev, "Unable to enable device clock.\n");
-			goto clk_dis_apb;
+			goto remove_ctlr;
 		}
 
 		pm_runtime_use_autosuspend(&pdev->dev);
@@ -679,10 +667,7 @@ static int cdns_spi_probe(struct platform_device *pdev)
 	if (!spi_controller_is_target(ctlr)) {
 		pm_runtime_set_suspended(&pdev->dev);
 		pm_runtime_disable(&pdev->dev);
-		clk_disable_unprepare(xspi->ref_clk);
 	}
-clk_dis_apb:
-	clk_disable_unprepare(xspi->pclk);
 remove_ctlr:
 	spi_controller_put(ctlr);
 	return ret;
@@ -703,8 +688,6 @@ static void cdns_spi_remove(struct platform_device *pdev)
 
 	cdns_spi_write(xspi, CDNS_SPI_ER, CDNS_SPI_ER_DISABLE);
 
-	clk_disable_unprepare(xspi->ref_clk);
-	clk_disable_unprepare(xspi->pclk);
 	pm_runtime_set_suspended(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
-- 
2.34.1




More information about the linux-riscv mailing list