[PATCH -next 03/25] spi: aspeed: Use helper function devm_clk_get_enabled()

Chin-Ting Kuo chin-ting_kuo at aspeedtech.com
Wed Aug 23 00:11:19 PDT 2023


> -----Original Message-----
> From: Li Zetao <lizetao1 at huawei.com>
> Sent: Tuesday, August 22, 2023 9:12 PM
> Subject: [PATCH -next 03/25] spi: aspeed: Use helper function
> devm_clk_get_enabled()
> 
> Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for prepared
> and enabled clocks"), devm_clk_get() and clk_prepare_enable() can now be
> replaced by devm_clk_get_enabled() when driver enables (and possibly
> prepares) the clocks for the whole lifetime of the device. Moreover, it is no
> longer necessary to unprepare and disable the clocks explicitly.
> 
> Signed-off-by: Li Zetao <lizetao1 at huawei.com>
> ---
>  drivers/spi/spi-aspeed-smc.c | 16 ++--------------
>  1 file changed, 2 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c index
> 21b0fa646c7d..bbd417c55e7f 100644
> --- a/drivers/spi/spi-aspeed-smc.c
> +++ b/drivers/spi/spi-aspeed-smc.c
> @@ -748,7 +748,7 @@ static int aspeed_spi_probe(struct platform_device
> *pdev)
>  	aspi->ahb_window_size = resource_size(res);
>  	aspi->ahb_base_phy = res->start;
> 
> -	aspi->clk = devm_clk_get(&pdev->dev, NULL);
> +	aspi->clk = devm_clk_get_enabled(&pdev->dev, NULL);
>  	if (IS_ERR(aspi->clk)) {
>  		dev_err(dev, "missing clock\n");
>  		return PTR_ERR(aspi->clk);
> @@ -760,12 +760,6 @@ static int aspeed_spi_probe(struct platform_device
> *pdev)
>  		return -EINVAL;
>  	}
> 
> -	ret = clk_prepare_enable(aspi->clk);
> -	if (ret) {
> -		dev_err(dev, "can not enable the clock\n");
> -		return ret;
> -	}
> -
>  	/* IRQ is for DMA, which the driver doesn't support yet */
> 
>  	ctlr->mode_bits = SPI_RX_DUAL | SPI_TX_DUAL | data->mode_bits; @@
> -777,14 +771,9 @@ static int aspeed_spi_probe(struct platform_device *pdev)
>  	ctlr->dev.of_node = dev->of_node;
> 
>  	ret = devm_spi_register_controller(dev, ctlr);
> -	if (ret) {
> +	if (ret)
>  		dev_err(&pdev->dev, "spi_register_controller failed\n");
> -		goto disable_clk;
> -	}
> -	return 0;
> 
> -disable_clk:
> -	clk_disable_unprepare(aspi->clk);
>  	return ret;
>  }
> 
> @@ -793,7 +782,6 @@ static void aspeed_spi_remove(struct platform_device
> *pdev)
>  	struct aspeed_spi *aspi = platform_get_drvdata(pdev);
> 
>  	aspeed_spi_enable(aspi, false);
> -	clk_disable_unprepare(aspi->clk);
>  }
> 
>  /*
> --
> 2.34.1

Reviewed-by: Chin-Ting Kuo <chin-ting_kuo at aspeedtech.com>




More information about the linux-riscv mailing list