[v2, 2/5] riscv: Add support for kernel mode vector

[Björn Töpel]

Andy Chiu <andy.chiu at sifive.com> writes:

> From: Greentime Hu <greentime.hu at sifive.com>
>
> Add kernel_vector_begin() and kernel_vector_end() function declarations
> and corresponding definitions in kernel_mode_vector.c
>
> These are needed to wrap uses of vector in kernel mode.
>
> Co-developed-by: Vincent Chen <vincent.chen at sifive.com>
> Signed-off-by: Vincent Chen <vincent.chen at sifive.com>
> Signed-off-by: Greentime Hu <greentime.hu at sifive.com>
> Signed-off-by: Andy Chiu <andy.chiu at sifive.com>
> ---
> Changelog v2:
>  - 's/kernel_rvv/kernel_vector' and return void in kernel_vector_begin
>    (Conor)
>  - export may_use_simd to include/asm/simd.h
> ---
>  arch/riscv/include/asm/simd.h          |  50 ++++++++++++
>  arch/riscv/include/asm/vector.h        |   2 +
>  arch/riscv/kernel/Makefile             |   1 +
>  arch/riscv/kernel/kernel_mode_vector.c | 101 +++++++++++++++++++++++++
>  4 files changed, 154 insertions(+)
>  create mode 100644 arch/riscv/include/asm/simd.h
>  create mode 100644 arch/riscv/kernel/kernel_mode_vector.c
>
> diff --git a/arch/riscv/include/asm/simd.h b/arch/riscv/include/asm/simd.h
> new file mode 100644
> index 000000000000..ef70af78005d
> --- /dev/null
> +++ b/arch/riscv/include/asm/simd.h
> @@ -0,0 +1,50 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (C) 2017 Linaro Ltd. <ard.biesheuvel at linaro.org>
> + * Copyright (C) 2023 SiFive
> + */
> +
> +#ifndef __ASM_SIMD_H
> +#define __ASM_SIMD_H
> +
> +#include <linux/compiler.h>
> +#include <linux/irqflags.h>
> +#include <linux/percpu.h>
> +#include <linux/preempt.h>
> +#include <linux/types.h>
> +
> +#ifdef CONFIG_RISCV_ISA_V
> +
> +DECLARE_PER_CPU(bool, vector_context_busy);
> +
> +/*
> + * may_use_simd - whether it is allowable at this time to issue vector
> + *                instructions or access the vector register file
> + *
> + * Callers must not assume that the result remains true beyond the next
> + * preempt_enable() or return from softirq context.
> + */
> +static __must_check inline bool may_use_simd(void)
> +{
> +	/*
> +	 * vector_context_busy is only set while preemption is disabled,
> +	 * and is clear whenever preemption is enabled. Since
> +	 * this_cpu_read() is atomic w.r.t. preemption, vector_context_busy
> +	 * cannot change under our feet -- if it's set we cannot be
> +	 * migrated, and if it's clear we cannot be migrated to a CPU
> +	 * where it is set.
> +	 */
> +	return !in_irq() && !irqs_disabled() && !in_nmi() &&

in_irq() is deprecated, use in_hardirq() instead.

Could you elaborate why !irqs_disabled() is required?

Nit: Use the full 100 chars for the line.


Björn