[-next v1 1/1] riscv: dts: starfive: jh7110: Fix GMAC configuration

Samin Guo samin.guo at starfivetech.com
Thu Aug 10 00:46:46 PDT 2023


Fixed configuration to improve the speed of TCP RX.

Before:
  # iperf3 -s
  -----------------------------------------------------------
  Server listening on 5201 (test #1)
  -----------------------------------------------------------
  Accepted connection from 192.168.1.4, port 47604
  [  5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47612
  [ ID] Interval           Transfer     Bitrate
  [  5]   0.00-1.00   sec  36.3 MBytes   305 Mbits/sec
  [  5]   1.00-2.00   sec  35.6 MBytes   299 Mbits/sec
  [  5]   2.00-3.00   sec  36.5 MBytes   306 Mbits/sec
  [  5]   3.00-4.00   sec  36.5 MBytes   306 Mbits/sec
  [  5]   4.00-5.00   sec  35.7 MBytes   300 Mbits/sec
  [  5]   5.00-6.00   sec  35.4 MBytes   297 Mbits/sec
  [  5]   6.00-7.00   sec  37.1 MBytes   311 Mbits/sec
  [  5]   7.00-8.00   sec  35.6 MBytes   298 Mbits/sec
  [  5]   8.00-9.00   sec  36.4 MBytes   305 Mbits/sec
  [  5]   9.00-10.00  sec  36.3 MBytes   304 Mbits/sec
  - - - - - - - - - - - - - - - - - - - - - - - - -
  [ ID] Interval           Transfer     Bitrate
  [  5]   0.00-10.00  sec   361 MBytes   303 Mbits/sec        receiver

After:
  # iperf3 -s
  -----------------------------------------------------------
  Server listening on 5201 (test #1)
  -----------------------------------------------------------
  Accepted connection from 192.168.1.4, port 47710
  [  5] local 192.168.1.3 port 5201 connected to 192.168.1.4 port 47720
  [ ID] Interval           Transfer     Bitrate
  [  5]   0.00-1.00   sec   111 MBytes   932 Mbits/sec
  [  5]   1.00-2.00   sec   111 MBytes   934 Mbits/sec
  [  5]   2.00-3.00   sec   111 MBytes   934 Mbits/sec
  [  5]   3.00-4.00   sec   111 MBytes   934 Mbits/sec
  [  5]   4.00-5.00   sec   111 MBytes   934 Mbits/sec
  [  5]   5.00-6.00   sec   111 MBytes   935 Mbits/sec
  [  5]   6.00-7.00   sec   111 MBytes   934 Mbits/sec
  [  5]   7.00-8.00   sec   111 MBytes   935 Mbits/sec
  [  5]   8.00-9.00   sec   111 MBytes   934 Mbits/sec
  [  5]   9.00-10.00  sec   111 MBytes   934 Mbits/sec
  [  5]  10.00-10.00  sec   167 KBytes   933 Mbits/sec
  - - - - - - - - - - - - - - - - - - - - - - - - -
  [ ID] Interval           Transfer     Bitrate
  [  5]   0.00-10.00  sec  1.09 GBytes   934 Mbits/sec        receiver

Reviewed-by: Hal Feng <hal.feng at starfivetech.com>
Signed-off-by: Samin Guo <samin.guo at starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index a608433200e8..76884cf373bf 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -318,8 +318,8 @@

 	stmmac_axi_setup: stmmac-axi-config {
 		snps,lpi_en;
-		snps,wr_osr_lmt = <4>;
-		snps,rd_osr_lmt = <4>;
+		snps,wr_osr_lmt = <0xf>;
+		snps,rd_osr_lmt = <0xf>;
 		snps,blen = <256 128 64 32 0 0 0>;
 	};

@@ -839,7 +839,7 @@
 			rx-fifo-depth = <2048>;
 			tx-fifo-depth = <2048>;
 			snps,multicast-filter-bins = <64>;
-			snps,perfect-filter-entries = <8>;
+			snps,perfect-filter-entries = <256>;
 			snps,fixed-burst;
 			snps,no-pbl-x8;
 			snps,force_thresh_dma_mode;
@@ -870,7 +870,7 @@
 			rx-fifo-depth = <2048>;
 			tx-fifo-depth = <2048>;
 			snps,multicast-filter-bins = <64>;
-			snps,perfect-filter-entries = <8>;
+			snps,perfect-filter-entries = <256>;
 			snps,fixed-burst;
 			snps,no-pbl-x8;
 			snps,force_thresh_dma_mode;
--
2.17.1




More information about the linux-riscv mailing list