[PATCH v4 03/36] arm64/gcs: Document the ABI for Guarded Control Stacks

Catalin Marinas catalin.marinas at arm.com
Wed Aug 9 07:24:14 PDT 2023


On Mon, Aug 07, 2023 at 11:00:08PM +0100, Mark Brown wrote:
> +2.  Enabling and disabling Guarded Control Stacks
> +-------------------------------------------------
> +
> +* GCS is enabled and disabled for a thread via the PR_SET_SHADOW_STACK_STATUS
> +  prctl(), this takes a single flags argument specifying which GCS features
> +  should be used.
> +
> +* When set PR_SHADOW_STACK_ENABLE flag allocates a Guarded Control Stack for

The 'for' at the end of the line above is not needed.

> +  and enables GCS for the thread, enabling the functionality controlled by
> +  GCSPRE0_EL1.{nTR, RVCHKEN, PCRSEL}.

This should be GCSCRE0_EL1.

> +* When set the PR_SHADOW_STACK_PUSH flag enables the functionality controlled
> +  by GCSCRE0_EL1.PUSHMEn, allowing explicit GCS pushes.
> +
> +* When set the PR_SHADOW_STACK_WRITE flag enables the functionality controlled
> +  by GCSCRE0_EL1.STREn, allowing explicit stores to the Guarded Control Stack.
> +
> +* Any unknown flags will cause PR_SET_SHADOW_STACK_STATUS to return -EINVAL.
> +
> +* PR_LOCK_SHADOW_STACK_STATUS is passed a bitmask of features with the same
> +  values as used for PR_SET_SHADOW_STACK_STATUS.  Any future changes to the
> +  status of the specified GCS mode bits will be rejected.
> +
> +* PR_LOCK_SHADOW_STACK_STATUS allows any bit to be locked, this allows
> +  userspace to prevent changes to any future features.

I presume a new lock prctl() won't allow unlocking but can only extend
the lock. I haven't looked at the patches yet but it may be worth
spelling this out.

> +* PR_SET_SHADOW_STACK_STATUS and PR_LOCK_SHADOW_STACK_STATUS affect only the
> +  thread the called them, any other running threads will be unaffected.

s/the called/that called/

> +* New threads inherit the GCS configuration of the thread that created them.
> +
> +* GCS is disabled on exec().
> +
> +* The current GCS configuration for a thread may be read with the
> +  PR_GET_SHADOW_STACK_STATUS prctl(), this returns the same flags that
> +  are passed to PR_SET_SHADOW_STACK_STATUS.
> +
> +* If GCS is disabled for a thread after having previously been enabled then
> +  the stack will remain allocated for the lifetime of the thread.

Sorry if this has been discussed in other threads. What is the issue
with unmapping/freeing of the shadow stack?

> At present
> +  any attempt to reenable GCS for the thread will be rejected, this may be
> +  revisited in future.

What's the rationale here? Is it that function returns won't work?

> +3.  Allocation of Guarded Control Stacks
> +----------------------------------------
> +
> +* When GCS is enabled for a thread a new Guarded Control Stack will be
> +  allocated for it of size RLIMIT_STACK / 2 or 2 gigabytes, whichever is
> +  smaller.

Is this number based on the fact that a function call would only push
the LR to GCS while standard function prologue pushes at least two
registers?

> +* When GCS is disabled for a thread the Guarded Control Stack initially
> +  allocated for that thread will be freed.  Note carefully that if the
> +  stack has been switched this may not be the stack currently in use by
> +  the thread.

Does this not contradict an earlier statement that the GCS is not freed
for a thread when disabled?

> +4.  Signal handling
> +--------------------
> +
> +* A new signal frame record gcs_context encodes the current GCS mode and
> +  pointer for the interrupted context on signal delivery.  This will always
> +  be present on systems that support GCS.
> +
> +* The record contains a flag field which reports the current GCS configuration
> +  for the interrupted context as PR_GET_SHADOW_STACK_STATUS would.
> +
> +* The signal handler is run with the same GCS configuration as the interrupted
> +  context.
> +
> +* When GCS is enabled for the interrupted thread a signal handling specific
> +  GCS cap token will be written to the GCS, this is an architectural GCS cap
> +  token with bit 63 set.  The GCSPR_EL0 reported in the signal frame will
> +  point to this cap token.

I lost track of the GCS spec versions. Has the valid cap token format
been updated? What I have in my spec (though most likely old) is:

  An entry in the Guarded control stack is defined as a Valid cap entry,
  if bits [63:12] of the value are same as bits [63:12] of the address
  where the entry is stored and bits [11:0] contain a Valid cap token.


The other bits in the code look fine to me so far but I haven't looked
at the code yet.

-- 
Catalin



More information about the linux-riscv mailing list